Easy@Home 9113973 User manual

ID: #05007
m
y
h
a
n
s
e
c
o
n
t
r
o
l
.
c
o
m
M
A
N
U
A
L
D
E
V
E
L
O
P
E
D
I
N
G
E
R
M
A
N
Y
User-friendly
Manual
User Guide
Manual
del usuario
Rechargeable and
corded shaver
Afeitadora eléctrica
recargable
English ..... Page 07
Español.. Página 23
dora elé
argable
e and
aver
ga

QR codes take you where you want to go
quickly and easily
Whether you require product information, spare parts or accessories, de-
tails on warranties or aftersales services, or if you want to watch a product
demonstration video, our QR codes will take you there in no time at all.
What is a QR code?
A QR code (QR = Quick Response) is a type of matrix that can be read with a
smartphone camera and that contains a link to a website or contact details,
for example.
Advantage:You do not need to manually enter a website address or contact
details.
How it works
To scan the QR code, all you need is a smartphone with QR code reader soft-
ware and an internet connection*. This type of software can be downloaded
for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and find out
more about the Aldi product you have purchased.*
Your Aldi Service Portal
All details mentioned above can also be found in the
Aldi Service Portal at www.aldi.us.
* Depending on your tariff plan you may be charged for the connection.
th y
roduct y
ce Portal
ed a
website addr
martphone w
is type of soft
pp store.
sm

Contents
Overview .....................................................................................................4
Product contents/device parts..................................................................6
General information ...................................................................................7
Reading and storing the instruction manual ..............................................7
Explanation of symbols.................................................................................... 7
Safety...........................................................................................................9
Proper use...........................................................................................................9
Safety notes........................................................................................................9
First use ..................................................................................................... 12
Checking the shaver and product contents................................................12
Displaying the status ...................................................................................... 13
Charging the storage battery ....................................................................... 13
Handling.................................................................................................... 14
Dry shave........................................................................................................... 14
Wet shave .......................................................................................................... 14
Using the trimmer ........................................................................................... 15
Using the travel guard.................................................................................... 15
Cleaning and maintenance...................................................................... 16
Daily cleaning after a dry shave ................................................................... 16
Daily cleaning after a wet shave....................................................................17
Weekly cleaning................................................................................................17
User maintenance for the shaving foils....................................................... 18
Replacing wearable parts ............................................................................. 18
Technical data ...........................................................................................20
Declaration of conformity..............................................................................20
Disposal ..................................................................................................... 21
Disposing of the packaging........................................................................... 21
Disposing of the shaving foil unit and shaver blades............................... 21
Disposing of old appliances........................................................................... 21
Warranty....................................................................................................43
Warranty card...................................................................................................43
Warranty conditions....................................................................................... 44
..
......
mity
......
...............
e packaging
he shavin
ppli
........
12
............
3
.................
13
.................
....................
.................
........................
.......................
......................
..................
........................
........................
ving fo
......

A
1
2
3
4
5
6
7
8
910
6
14
1212
13
B
D
C
11
4
USA
zur
z
zu
z
z
ur
z
ur
ur
Freigabe
Fre
be
be
F

15
17
E F
G H
I J
K L
15
16
5
USA
zur
zur
zu
ur
zur
zur
zu
u
ur
r
z
z
z
z
z
z
z
z
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
r
z
z
z
z
z
z
z
z
zu
zu
zu
zu
zu
z
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
zu
z
z
z
z
z
z
z
z
z
z
z
z
z
z
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Freigabe
be
be
b
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
e
e
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
be
ab
g
gab
ga
ab
gab
ab
a
a
ab
g
igab
igab
gab
gab
gab
gab
Fre
Fre
eig
F

6
Product contents⁄device parts
1Protective cap
2Shaver head (shaver head frame with shaving foil unit consisting
of two shaving foils and an integrated trimmer)
3Shaver blades, 2x
4Release button, 2x
5On/Off switch
6Female plug
7Cleaning brush
85 V plug
9Power cord
10 AC adapter plug
11 Storage bag
12 Battery symbol
13 Grid symbol
14 Trimmer
15 Hook (of the shaving foil unit)
16 Shaver head frame
17 Shaving foil unit
USA
zur
oil uni
oil u
e
nitnit
Freigabe

AFTER SALES SUPPORT
USA
G
eneral
i
nformat
i
o
n
7
[e-mail]
USA
[phone]
General information
Reading and storing the instruction manual
This instruction manual accompanies this rechargeable and corded
shaver. It contains important information on setup and handling.
For improved readability, the rechargeable and corded shaver will
be referred to only as the “shaver”below.
Before using the shaver, read the instruction manual carefully. This
particularly applies for the safety notes. Non-observance of this in-
struction manual may cause damage to the shaver.
The instruction manual is based on the standards and rules in force
in the European Union. When abroad, you must also observe coun-
try-specific guidelines and laws.
Store the instruction manual for further use. If you pass the shaver
on to third parties, please be absolutely sure to include this instruc-
tion manual.
Explanation of symbols
The following symbols and signal words are used in this instruction manual, on
the shaver or on the packaging.
WARNING! This signal word designates a hazard with moderate
risk, which may result in death or severe injury if not avoided.
CAUTION! This signal word designates hazard with low risk which
may result in minor or moderate injury if not avoided.
NOTICE! This signal word warns of possible damage to property or
provides you with useful additional information regarding assem-
bly or operation.
The certified safety seal: TÜV Süd confirms that this shaver is safe
when used as foreseeable. The test seal confirms that the shaver
complies with the German Product Safety Act.
zur
UTION!UTION!
ThisThis
may result
may result
Freigabe
ards
must also
st also
her use. If you pa
r use. If yo
olutely sure to inctely sure to
al words are usedords are used
ng.
s signal word de
s signal word
result in deresult

G
eneral
i
nformat
i
o
n
USA
AFTER SALES SUPPORT
8
USA
[phone] [e-mail]
This symbol identifies voltage and the current rating for direct
current.
This symbol identifies electrical devices that belong to
the protection class 2 (power supply unit).
This symbol identifies electrical devices that belong to the
protection class 3 (shaver).
This symbol indicates the polarity of the current on the 5V plug.
Devices marked with this symbol are only suitable for household
use (dry indoor rooms).
This symbol identifies intrinsically safe transformers (with a fuse
and thermo protection).
The shaver is suitable for being cleaned under running water.
ATTENTION: The handheld part must be disconnected from the
connection line before cleaning it with water.
zur
rotectrote
haver ishaver is
O
Freigabe
he current on thecurrent on
ymbol are only suibol are only s
es intrinsicaes in
n).
n)

AFTER SALES SUPPORT
USA
S
a
f
et
y
y
9
USA
[phone] [e-mail]
Safety
Proper use
The shaver is designed exclusively for dry and wet shaving of the face, but also
for trimming beards. The shaver is only intended for private use and not suit-
able for commercial purposes.
Only use the shaver as described in this instruction manual. Any other use is
considered improper and may result in damage to property.
The manufacturer or vendor cannot be held liable for damages incurred
through improper or incorrect use.
Safety notes
WARNING!
Risk of electric shock!
A faulty electrical installation, excessive line voltage
or incorrect operation may result in an electric shock.
− Only connect the shaver if the line voltage of the socket
corresponds to the nameplate specification of the power
supply unit.
− Only use the shaver with the enclosed power supply unit.
The shaver requires safety extra-low voltage (SELV) with the
values specified in the chapter “Technical data”.
− Only connect the power supply unit to an easily accessible
socket so that you can quickly disconnect it from the grid in
case of a failure.
− If the power cord, the power supply unit or the shaver
exhibit visible damages or are defective, do not use them
further.
− If the power cord of the shaver is damaged, the manufac-
turer, its customer service team or a person with similar
qualifications must replace it.
zur
uire
uir
ied in th
ed in
ect the po
ect the p
o that youo that you
a failure
a failu
wer
wer
Freigabe
llation, excessition, exce
n may result inn may result
r if the line voltthe line vol
ameplate speceplate sp
er with the e
er with th
s safety es saf
ch

Sa
f
et
y
USA
AFTER SALES SUPPORT
10
USA
[phone] [e-mail]
− Do not open the housing; instead, have a qualified profes-
sional perform repairs. Contact a qualified workshop for
this. Liability and warranty claims are waived in the event
of repairs performed by the user, improper connection or
incorrect operation.
− Only parts that comply with the original device data may be
used for repairs. This device contains electrical and me-
chanical parts, which are essential for providing protection
against sources of danger.
− Do not immerse the shaver, the power supply unit or power
cord in water or other liquids.
− Never touch the power plug with damp hands.
− Never use the power cord as a carrying strap.
− Keep the shaver, the power supply unit and power cord
away from open flames and hot surfaces.
− Lay the power cord so that it does not pose a tripping hazard.
− Do not kink the power cord and do not lay it over sharp
edges.
− Only use the shaver in indoor spaces.
− Never store the shaver so that there is a risk of it falling in
water.
− Never reach to retrieve an electrical device if it has fallen in
water. In such a case, immediately disconnect the power
plug.
− Make sure that children do not insert any objects in the
shaver.
− Always switch the shaver off and pull the power supply
unit out of the socket when you are not using it, when you
intend to clean it or in the event of a fault.
zur
riev
riev
a case, im
case, i
that child
that child
Freigabe
ands.s.
strap.strap.
unit and power
t and po
urfaces.faces.
es not pose a tres not pose
and do not layd do not la
ndoor spaces.ndoor spac
er so that ther
er so that
an ele
an

AFTER SALES SUPPORT
USA
S
a
f
et
y
y
11
USA
[phone] [e-mail]
WARNING!
Danger for children and persons with impaired
physical, sensory or mental capacities (e.g. par-
tially disabled persons, older persons with re-
duced physical and mental capacities) or lack of
experience and knowledge.
− This shaver may be used by children ages eight and over
as well as persons with impaired physical, sensory or
mental capacities or those lacking experience and knowl-
edge if they are supervised or have been instructed in
how to safely use the shaver and have understood the
risks associated with operating it. Children may not play
with the shaver. Children may not clean the device and
perform user maintenance if they are not supervised.
− Keep the shaver, the power supply unit and power cord
away from children under eight years of age.
− Do not leave the shaver unattended while in operation.
− Make sure that children do not play with the packaging
wrapper. They may get caught in it when playing and
suffocate.
CAUTION!
Risk of injury due to sharp edges and blades.
If you use the shaver with a damaged shaver head,
without a shaver head or if you push down on the
shaving foils, you could cut yourself on the sharp
edges or blades.
− Do not push the shaving foils in with your fingers.
− Do not use the shaver if the shaver head, the integrated
shaving foils or the trimmer are damaged.
− Do not use the shaver if the shaver head is not firmly
mounted.
zur
N!N!
of injury
of injur
you use tyou use t
without
withou
avi
avi
Freigabe
in
unders
ders
ildren may n
ildren ma
clean the dev
ean the d
ey are not supare not s
supply unit andpply unit
eight years ofeight years
unattatt
ended wended
en do not playdo not p
y get caught iny get caugh

F
i
rst us
e
USA
AFTER SALES SUPPORT
12
USA
[phone] [e-mail]
NOTICE!
Risk of damage!
Improper handling of the shaver may result in dam-
age to the shaver.
− Only transport and store the shaver with the protective
cap in place.
− Only transport the shaver with the transport guard en-
gaged.
− Do not let the shaver fall down.
First use
Checking the shaver and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging
with a sharp knife or other pointy object, you may
quickly damage the shaver.
− Therefore, be careful when opening it.
1. Take the shaver out of the packaging.
2. Check to make sure that the delivery is complete (see fig. A).
3. Check whether the shaver, the individual parts or the accessories exhibit
damage.
4. If the delivery is incomplete or the shaver, the individual parts or the acces-
sories exhibit damage, do not use the shaver. Contact the manufacturer at
the service address specified on the warranty card.
zur
hat the d
hat th
e shaver, th
e shaver, t
y is incom
y is incom
ama
ma
Freigabe
contentsntents
s when openinwhen open
e or other poinother poin
e the shaver.e the shave
be careful wh
be carefu
ckaging.ckag
very

AFTER SALES SUPPORT
USA
F
i
rst us
e
13
USA
[phone] [e-mail]
Displaying the status
The shaver has two indicators that supply information about the power supply
or the rechargeable battery charge level (see fig. C):
• the battery symbol 12
• the grid symbol 13
Symbol Meaning
grid illuminated in red The storage battery will charge.
grid flashing in red The rechargeable battery is almost empty and
must be charged.
grid illuminated in red,
battery flashing in green
The rechargeable battery is fully charged.
The battery is illuminated
in blue
The shaver is operating in battery mode.
No symbol indicator The shaver is operating in grid mode or has been
switched off.
Charging the storage battery
NOTICE!
The rechargeable battery takes approx. 8 hours to charge ful-
ly. However, you can also use the shaver in grid mode without
charging the rechargeable battery.
1. Insert the 5V plug 8in the female jack 6on the bottom of the shaver
(see fig. A).
2. Connect the AC adapter plug 10 in a properly installed socket.
The grid symbol
13
on the handle illuminates in red to indicate that the
battery is charging. The battery symbol
12
flashes in green as soon as the
rechargeable battery is fully charged.
3. To charge the shaver, place it on a dry and level surface or shave in grid
mode.
zur
y
y
the rec
he r
V plugV plug
ur
8
A
A
).).
e AC aAC a
Freigabe
be
ab
ga
fully
ng in battery mo
ng in battery m
operating in grid mating in gr
f.
batteryttery
able battery take
able battery
can also uscan a
rgeab
rg

Handl
i
n
g
USA
AFTER SALES SUPPORT
14
USA
[phone] [e-mail]
Handling
Dry shave
NOTICE!
We recommend a dry shave before you wash. After washing, you
skin is slightly swollen. As a result, shavers are often unable to
reach the entire length of your beard hair so the shave will be less
thorough.
For a dry shave, follow the steps below:
1. Take the protective cap 1off of the shaver (see fig. A).
2. Use the On/Off switch 5to turn the shaver on.
3. Use your free hand to stretch the part of your face you intend to shave.
4. Apply gentle pressure to move the shaver head 2perpendicular to the
direction of hair growth.
5. After a few strokes, use your free hand to check the results and repeat step
4 if necessary.
6. Shave as described in steps 2 – 4.
7. If necessary, use the trimmer 14 as described in the chapter “Using the
trimmer” (see fig. D).
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter “Daily cleaning after a dry
shave”.
Wet shave
1. Dampen your face and apply shaving cream or gel to your face.
2. Take the protective cap 1off of the shaver (see fig. A).
3. Use the On/Off switch 5to turn the shaver on.
4. While applying gentle pressure, move the shaver head 2perpendicular to
the direction of hair growth.
5. After a few strokes, use your free hand to check the results and repeat
step 4 if necessary.
6. Shave as described in steps 2 – 4.
7. If necessary, use the trimmer as described in the chapter “Using the
trimmer”.
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter “Daily cleaning after a wet
shave”.
zur
e and apply
e and apply
ctive capctive cap
u
1
ff switch
ff switch
u
gen
gen
Freigabe
u intend to s
end to s
b
perpendicular
perpendicu
eck the results andthe results
s described in theescribed in the
u have finished shu have finishe
bed in the chapte
bed in the ch

AFTER SALES SUPPORT
USA
Handl
i
n
g
g
15
USA
[phone] [e-mail]
Using the trimmer
NOTICE!
Keep in mind that the trimmer always generates a straight cut-
ting edge. If you do not want a straight cutting edge, you must
hold the shaver at an angle.
For hard-to-reach areas or for very precise cuts, use a comb to
check the hair you intend to trim with the trimmer and the cut
length.
Use the trimmer as follows:
1. Move the trimmer 14 all the way out until it audibly locks into place
(see fig. D).
2. Use the On/Off switch 5to turn the shaver on (see fig. A).
3. Slowly guide the trimmer up to the hair you intend to cut.
Always use short strokes to cut your hair.
4. Turn the shaver off.
5. Clean the shaver as described in the chapter “Daily cleaning after a wet
shave” or “Daily cleaning after a dry shave”.
Using the travel guard
The shaver is equipped with a travel guard that prevents the shaver from acci-
dentally activating.
Activating the travel guard
− Hold the On/Off switch 5down for approx. 4 seconds (see fig. A). The
shaver will automatically deactivate and the battery symbol will flash four
times in green.
The travel guard is now active.
Deactivating the travel guard
NOTICE!
Connecting the shaver with the power supply unit and inserting
the power supply unit in a socket will automatically deactivate
the travel guard.
1. Hold the On/Off switch 5down for approx. 4 seconds (see fig. A).
The battery symbol will flash twice in green in the process.
The shaver will now automatically switch on.
2. Briefly push the On/Off switch to turn off the shaver.
The travel guard is now deactivated.
zur
vel
ve
witchwitch
r
tomatically
tomatically
een.een.
uard is now
uard is n
Freigabe
see
fig. Aig. A
).).
tend to cut.tend to cut.
chapter “Daily cleapter “Daily
ryshave”.y shave”.
rd
a travel guard thaa travel guard
uard
uar
ow

Clean
i
n
g
and ma
i
ntenanc
e
USA
AFTER SALES SUPPORT
16
USA
[phone] [e-mail]
Cleaning and maintenance
NOTICE!
Risk of short circuit!
Water that has penetrated the power cord or the
power supply unit may cause a short circuit.
− Never immerse the power supply unit or the 5 V
plug in water.
NOTICE!
Risk due to improper operation!
Improperhandlingoftheshavermayresultindamage.
− Do not use any aggressive cleaners, brushes
with metal or nylon bristles, sharp or metallic
cleaning utensils such as knives, hard scrapers
and the like. They could damage the surfaces,
the shaving foil and the shaver blades.
Daily cleaning after a dry shave
1. Before cleaning, pull the 5 V plug 8out of the shaver (see fig.A and B).
2. Use the On/Off switch 5to turn off the shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons 4to release the shaver head 2(see fig.E).
5. Pull the shaver head up and off.
6. Knock the shaver head out gently over a sink to remove stubbles.
7. Without the shaver head mounted, use the On/Off switch 5to switch the
shaver on for approx. 5 – 10 seconds to dispel any stubble from the shaver
blades 3.
8. Firmly mount the shaver head on the shaver until the locking mechanism
audibly engages (see fig. F).
9. Place the protective cap 1on the shaver.
The shaver is now ready for use again.
zur
r
t
t
the sink.
the sin
ease buttonase button
er head up a
r head up a
ver hear hea
Freigabe
ayresultinda
esultin
eaners, brushe
aners, brus
es, sharp or mesharp or
as knives, hardknives, ha
uld damage thuld damage
d the shaver bthe shaver
a dry shavea dry shave
V plug
V plug
Fr
out oo
urn off thurn o

AFTER SALES SUPPORT
USA
Clean
i
n
g
and ma
i
ntenanc
e
g
17
USA
[phone] [e-mail]
Daily cleaning after a wet shave
1. Before cleaning, pull the 5 V plug 8out of the shaver (see fig.A and B).
2. Use the On/Off switch 5to turn off the shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons 4to release the shaver head 2(see fig. E).
5. Pull the shaver head 2up and off (see fig.A).
6. Wash the shaver head thoroughly under warm running water on the inside
and outside (see fig.G).
7. Carefully dry the shaver head with a lint-free cloth or a paper towel. In the
process, do not push the shaving foils in.
8. Thoroughly rinse off the top part of the shaver and the shaver blades under
warm running water (see fig.H).
9. Use the On/Off switch 5to switch the shaver on without the shaver head
for approx. 5 – 10 seconds to dispel any drops of water off of the shaver
blades 4.
10.Use a lint-free cloth or a paper towel to thoroughly dry off the shaver.
11. Firmly mount the shaver head on the shaver until the locking mechanism
audibly engages (see fig. F).
12.Place the protective cap 1on the shaver.
The shaver is now ready for use again.
Weekly cleaning
It is recommended that you thoroughly clean the shaver once a week. To do so,
proceed as follows:
1. Before cleaning, pull the 5 V plug 8out of the shaver (see fig. A and B).
2. Use the On/Off switch 5to switch the shaver off (see fig. A).
3. Hold the shaver over the sink.
4. Depress both release buttons 4to release the shaver head 2(see fig.E).
5. Pull the shaver head up and off.
6. Knock the shaver head out gently over a sink to remove stubbles.
7. Thoroughly wash the shaver head under warm running water from the in-
side and outside (see fig.G).
8. Carefully dry the shaver head with a lint-free cloth or a paper towel. In the
process, do not push the shaving foils in.
9. Without the shaver head mounted, use the On/Off switch 5to switch the
shaver on for approx. 5 – 10 seconds to dispel any stubble from the shaver
blades 3.
zur
gg
that you t
that you
ws:ws:
aning, pullaning, pull
n/Off sw/Off sw
Freigabe
he shav
shav
r on without the s
on without th
ps of water off of tof water of
to thoroughly dryto thoroughly
n the shaver until te shaver unt
F
on the shaver.n the shav
or use again.
or use again

Clean
i
n
g
and ma
i
ntenanc
e
USA
AFTER SALES SUPPORT
18
USA
[phone] [e-mail]
10.Switch the shaver back off.
11. Use the cleaning brush 7to completely remove all stubbles from the shav-
er blades and the entire top part of the shaver (see fig.A and I).
12.Thoroughly rinse off the top part of the shaver and the shaver blades under
warm running water (see fig.H).
13.Use the On/Off switch to switch the shaver off without the shaver head for
approx. 5 – 10 seconds in order to dispel water drops from the shaver blades
4.
14.Use a lint-free cloth or a paper towel to thoroughly dry off the shaver.
15.Firmly mount the shaver head 2on the shaver so that the locking mecha-
nism locks into place (see fig. F).
16.Place the protective cap 1on the shaver.
The shaver is now ready for use again.
User maintenance for the shaving foils
To maintain the performance of your shaver and increase the service life of the
shaving foils, you should perform user maintenance on the shaving foils every
two months as follows:
1. Put a drop of fine, non-resinous household oil on the tip of your finger.
2. Distribute the oil evenly on the shaving foils.
3. Without applying pressure, dab the shaving foils with a soft, lint-free cloth
or paper towel.
Replacing wearable parts
Ordering wearable parts
You can order a new shaving foil unit and shaver blades to replace worn ones.
You can choose between three packages:
• Shaving foil unit consisting of two shaving foils and the integrated trimmer
• Two shaver blades as a set
• Set consisting of a shaving foil unit and two shaver blades
To place your order, contact the address provided on the order form.
ble p
ble
able parts
ble parts
new shavin
new shavin
betweenetween
Freigabe
g foilsoils
nd increase the sencrease the
ntenance on the shnance on th
ousehold oil on thehold oil on th
shaving foils.aving foils
dab the shaving fdab the shavi
arts
art

AFTER SALES SUPPORT
USA
Clean
i
n
g
and ma
i
ntenanc
e
g
19
USA
[phone] [e-mail]
Replacing the shaving foil unit
If the shaving foil unit is damaged, it must be promptly replaced. We generally
recommend that you replace the shaving foil unit after 12 months of daily use.
1. Depress both release buttons 4to release the shaver head 2
(see fig. A and E).
2. Pull the shaver head up and off.
3. Push the hooks 15 on the left and right of the shaving foil unit 16 into the
shaver head frame 17 (see Fig. K and L)
4. Pull the shaving foil unit down and out of the shaver head frame (see fig. L).
5. Dispose of the used shaving foil unit as described in the chapter “Disposal”.
6. Place the new shaving foil unit in the shaver head frame so that:
a. the guide braces inside the shaver head frame 17 extend into
the guide grooves outside along the shaving foil unit 16 and
b. the recess in the shaving foil unit 16 is on the same side as the
recess inside the shaver head frame 17 (see fig. K and L).
7. Place two fingers on the back side of the integrated trimmer.
8. Push the shaving foil unit into the shaver head frame until the hooks 15 au-
dibly lock into the shaver head frame.
9. Firmly mount the shaver head on the shaver until the locking mechanism
audibly locks into place (see fig.F).
10.Place the protective cap 1onto the shaver (see fig.A).
Your shaver is now ready for use again.
Replacing the shaver blades
We recommend replacing the shaver blades after 12 months of daily use. The
two shaver blades must always be replaced at the same time.
1. Depress both release buttons
4
to release the shaver head
2
(see fig. E).
2. Pull the shaver head up and off of the shaver.
3. Pull the shaver blades
3
straight up and out of their brackets (see fig. I).
4. Dispose of the used shaver blades as described in the chapter “Disposal”.
5. Mount the new shaver blades on the brackets.
6. Firmly mount the shaver head
2
on the shaver until the locking mechanism
audibly locks into place (see fig.F).
7. Place the protective cap
1
onto the shaver (see fig.A).
Your shaver is now ready for use again.
zur
dy fo
dy
e shaver b
e shaver
nd replacingnd replacing
blades mu
lades m
hre
re
Freigabe
me so
e
be
exten
exten
foil unitoil unit
be
16
and
an
on the same sidethe same
(seee
fig. Kfig. K
andan
K
L
the integrated trie integrated
e shaver head framhaver head fr
d frame.ame.
ead on the shaveread on the sh
(see(see
fig.Ffig.F
).)
pp
F
1
onto theonto t
use agai
use

T
echn
i
cal data
USA
AFTER SALES SUPPORT
20
USA
[phone] [e-mail]
Technical data
Model: 9113973
Article number: 92276
Power supply: Power supply unit
Input 100 – 240 V/AC,
50 – 60 Hz, max. 0.2 A
Output 5 V/DC, 800 mA
Rechargeable battery: 1 x Li-Ion 14430 500 mAh
Protected against overloading
and deep discharge
Charging time: 8h
Operating time: max. 60 min
Motor: 3.7 V/DC
Protection class power
supply unit:
2
Protection class shaver: 3
IP code power supply
unit:
IP 44, protection against de-
bris with a diameter greater
than 0.04" (1mm) and entry
with a wire
IP code shaver: IPX6, protected against pow-
erful water jets
Cable length: approx. 70.87" (180 cm)
Cutting blades: Stainless steel
Shaving foils: Nickel, brand: STORK
Dimensions (W x D x H): 2.64" x 1.54" x 6.3" (67 x 39 x
160 mm)
Weight (including
accessories):
263 g
X6
X6
erful w
erfu
approx
appro
StaiSta
H
H
Freigabe
ction against deon against de
h a diameter greatdiameter g
0.04" (1mm) and e0.04" (1mm) an
h a wire
h a wire
rotected arotec
er jet