Easypix Streetvision SV4 User manual

SV4 • EN

SV4 • EN
1) TF Slot 2) Up
3) Menu 4) Down
5) Mic 6) Reset
7) Power 8) Lock
9) Mode 10) OK
11) USB 12) HDMI-OUT
IMPORTANT INFORMATION
To ensure the optimal functioning of your camera, please note the
following important information:

SV4 • EN
•The camera must be connected to the car cigarette lighter socket
via the AC adapter for proper operation.
MicroSD card:
• Please ensure your memory card is formatted in the camera before
first using the card for the first time (Settings > Format).
• The maximum capacity memory card supported is 32GB.
Use of memory cards exceeding the maximum recommended
capacity may result in file errors.
• For best results, we recommend using high quality Micro SD cards
Class 10 with U3 High Speed or higher.
Safety instructions:
WARNING: The camera is not suitable for children under 36
months because of choking hazard.
WARNING: Always protect your camera from falls, blows and
bumps.
• Keep a sufficient distance from objects that generate strong
magnetic fields or radio waves, such as electrical appliances to
prevent them from damaging the product or affecting the sound and
image quality.
• Store the device cool (at room temperature) in a dry and dust-free
location and never expose the product to high temperatures or
permanently direct sunlight.
• In the unlikely event of overheating, smokes or unpleasant odors
coming out of the unit, disconnect it immediately from the charging
cable and remove the battery to avoid a fire.

SV4 • EN
FUNCTION DESCRIPTION
1) TF Slot - Memory Card Slot
2) Up
Page up
In the settings menu or playback mode, short press【Up】to navigate
up.
3) Menu
In standby, short press【Menu】to enter the settings menu
Short press 【Up】or【Down】to select the menu options
Short press 【OK】to confirm.
Short press 【Menu】to exit the menu setting page.
The menu settings process is the same in video mode, camera mode
and playback mode.
4) Down
Page down
In the settings menu or playback mode, short press【Down】to
navigate down.
5) MIC –Built-in microphone for audio recording
6) Reset
Short press the Reset button, to restart the camera.
7) Power
To Turn On:
Long press【Power】and hold for 3s to turn the camera on.
After switching on the camera will start recording automatically.

SV4 • EN
To Turn Off:
Long press【Power】and hold for 3s.
The camera will automatically save the current video file and user
settings and shut down.
8) Lock
During recording, short press to protect the current file from
deletion.
9) Mode
Function: Mode switch function
In standby mode, short press【Mode】to switch between different
modes (video/camera/playback).
10) OK/Pause key
Function 1: Confirm selected menu item
In standby video mode/camera mode/playback mode, short press
【Menu】to enter the menu.
Short press【Up/Down】to browse, and press【OK】to confirm.
Function 2: Start/Stop video recording.
In video mode, short press【OK】to start taking video, and short press
【OK】again to stop taking video.
Function 3: Camera
In camera mode, short press【OK】to take a photo.
Function 4: Pause video playback
In playback mode, short press【OK】to pause the video playback.
Short press【OK】start playback again.

SV4 • EN
11) USB
USB data interface
Function 1: Connection to PC for data transfer
Function 2: Connection to an external power supply to charge the
battery or operate the camera.
12) HDMI-Out
Connect a HDMI cable to this port to view your content on a TV while
in playback mode
SPECIAL FEATURES
G-sensor
This camera features a built-in G-sensor. In the case of a serious
vehicle impact, the camera will save and protect the recorded video
against being overwritten and this will be indicated by the on screen
‘lock’ icon. This protected video file will not be overwritten during
normal operation.
Note: The sensitivity of the G-Senor is adjustable, and its settings may
be changed in the setup menu according to your preference.
One-press lock function
This camera also features a one-press lock function, which allows you
to manually mark files you wish to protect from deletion during the
camera’s normal recording and over-writing process.
To protect a file, while in video mode, short press【Lock】and the
current recording will be protected.

SV4 • EN
Auto power On / Off
Your camera will automatically power on and start recording when
the vehicle ignition is turned on.
This will be confirmed by the illuminated charge indicator and the
video recording indicator will flash.
When the vehicle ignition is switched off, the camera will automati-
cally save the recorded video and power off.
All recorded videos will be saved to the inserted memory card in
multiple separate files.
When the memory card is full, the camera will automatically
over-write the first (oldest) file.
Manual Power On / Off
Long press 【Power】for 3 seconds to turn the camera on .
Long press 【Power】for 3 seconds again to turn the camera off.
Note: The camera will automatically shut down when the battery is
low.
Photo mode
Switch the camera on and short press【Mode】to enter photo mode.
The icon in the upper left corner will change from video to photo.
Short press【OK】to take a photo.
Short press 【Mode】to switch back to video mode.
Video / Photo playback
Switch the camera on and short press【Mode】twice to switch to
playback mode.
Short press 【Up】/【Down】to select a photo file to view or video file
to playback.
Short press 【OK】to confirm your selection.

SV4 • EN
Too exit Playback mode short press【Mode】.
Time setting
In standby and while no video is recording, short press【Menu】to
enter the setup menu.
Short press 【Up】/【Down】to move the cursor to the time / date
setting option.
Short press 【OK】to enter the time setting menu.
【Note】Please ensure the time and date are saved correctly to
ensure the most accurate information is available in the event of a
traffic incident.
USB mode
Connect the camera to a computer USB port using the USB cable.
TECHNICAL SPECIFICATIONS
G-sensor
Built-in
LCD screen size
3” /7.6cm (16:9)
Lens
140°
Video resolution
Full HD (interpolated), HD, VGA
Video format
AVI
Loop recording
Yes
Photo resolution
3M, 2M, 1M
Photo format
JPG
Memory card
SDHC TF card up to 32GB
(not included)
MIC
Yes
Frequency
50HZ/60HZ
Power interface
5V 1A

SV4 • EN
TROUBLE SHOOTING
For problems encountered during normal user
please try the resolutions suggested below:
Can’t take photos and record video
Ensure the memory card has enough available space or is not locked
The camera automatically stops when recording
Ensure you are using a compatible high-speed SDHC memory card.
Class 10 or higher recommended.
“File Error” message appears when viewing
a photo or playing back a video
Ensure you memory card is formatted before fist use.
Video recording is not clear
Ensure the camera lens is free from grease and dirt.
Black image when recording sky or water scenes
Scenes with high contrast will influence the automatic exposure
function of the camera. Please adjust the EV setting in the camera
settings menu.
The video color on a cloudy day and in outdoor light is
distorted
In the camera settings menu set the “white balance” function to
automatic.

SV4 • EN
There is a flickering or interference in the image
IN the camera settings menu set the ‘Frequency’ to 50Hz or 60Hz
according to your local power supply frequency.
The camera is unresponsive or frozen.
Restore to factory settings by pressing the Reset button.
Note: After restarting you may need to reset the time and date.
All product specifications are correct at time of print and are
subject to change without prior notice.
Easypix GmbH reserve the right for errors or omissions.
For technical help please visit our support area on www.easypix.eu.
CONFORMITY
The manufacturer hereby declares that the CE marking was applied
to the product StreetVision SV4 in accordance with the basic
requirements and other relevant provisions of the following CE
Directives:
2014/53/EU
2011/65/EC RoHs
2014/30/EU EMV
2012/19/EC WEEE
The EC Declaration of Conformity can be downloaded here:
http://www.easypix.info/download/pdf/doc_sv4.pdf