Easyrig EasyTilt User manual

Align the loop over the dedicated track of
the spindle link and fasten it by pressing
the sealing ring forward.
Adjust the ropes. You want to be able to tilt
the gimbal without the battery or top handle
touching the EasyTilt.
Turn page
1
2
3
EasyTilt manual
Mount the Spindles on the frame of the
gimbal by using an allen key (5mm). Make
sure not to mount it where you comfortably
can hold the gimbal.
EasyTilt is a registered trademark

To adjust the ring side-to-side, you can
release the ring by turning the lever
counter clockwise. To get it centered on
the EasyTilt fasten it between the two
tracks.
Fasten your Easyrig onto the EasyTilt by
using the ball stud with our Quick Release
or simply slide the ring to the side and use
our standard camera hook. You are now
ready to shoot!
4
5
6
A. Fasten the ropes by pressing them
into the declining track of the EasyTilt.
B. You can “hide” the excess rope by
pressing the rope through the round hole.
EasyTilt is a registered trademark www.easyrig.se