ECAM Plus KP2 Instruction Manual

3. Watch the installation video.
Refer to proper camera installation
guidelines here.
2. Scan the QR code inside the box
for a detailed installation video, spec
sheet and user guide.
5. Remove backing. Press evenly
to ensure the mounting bracket’s
adhesive is flush against the glass.
Hold to window for 30 seconds.
8. At the end of the bracket cable (A),
connect the terminal to the smaller
end of the adapter cable (F).
6. Remove adhesive and apply cable
clips to windshield. Slide the bracket
power cable into clips.
7. Tuck cable behind weather stripping,
and push stripping in to secure it.
Proceed to next page for device calibration >
12. Open the KP2 installation app, and
scan the IMEI code on the box’s label.
10. Turn on your vehicle. Check
that both blue and green lights
remain on after 5 minutes. If not,
an error occurred.
13. Follow the device configuration
prompts to complete the installation
app.
1. Review the package contents.
Standard Kit (w/Optional OBDII Data Adapter Cable)
A.
B. C.
9. Plug the end of the OBDII adapter
cable into your vehicle’s OBDII port.
11. Scan the QR code above, and
download the iOS or Android KP2
installation app.
4. Use wipe to clean the window.
Allow time to dry. To determine
compliant device placement,
check local regulations.
D.
E.
F.
A. KP2 Camera, Mounting
Bracket and Attached
Bracket Power Cable
B. 3M™Adhesive Tape
C. Alcohol Pads
D. Clips
E. Torx®Wrench
F. Optional: OBDII
Data Adapter Cable
(Connects to A) -
Sold Separately
Use the appropriate QR code to
download the KP2 Installation App.
FOR KP2 VIDEO TELEMATICS CAMERA
QUICK START INSTALLATION GUIDE

14. Ensure the IMEI code in the
app matches your device’s IMEI.
If there isn’t a match, tap No and
contact SmartWitness Support.
If there’s a match, tap Yes
to continue.
17. If you adjust either camera, tap
Refresh Images to update road- and
driver-facing camera images.
Use the arrows to adjust your vehicle’s
“Horizon” and “Hood” lines.
Ensure your “Hood” line is in the
bottom one-fourth of your image.
Scroll down and tap Next to save the
“Horizon” and “Hood” lines.
20. After you’ve made changes
and activated the appropriate
features, tap Confirm to save
your configuration.
15. Read the instructions
to understand more about
your vehicle’s “Horizon” and
“Hood” lines.
Tap Show Me How for a
brief video walk-through
of the device attachment
process.
18. Choose preferences for
in-cabin alerts, an alert’s volume
level or activation of dierent
ADAS and DSM events.
21. On the home screen, you’ll
see a success message validating
your saved configuration.
16. Select your KP2 camera
configuration.
Choose the driver’s side
of the vehicle.
Tap Next to set your vehicle’s
“Horizon” and “Hood” lines.
19. If you’re unaware of a setting’s
function, tap the info icon to
learn more. Pay close attention
to Camera Height. Enter an
even interval value (e.g., 190 cm),
not an odd interval value
(e.g., 205 cm, 213 cm).
Congratulations!
Your KP2 is now
ready to go!
© 2023 eCam Plus All Rights Reserved. [e-mail] | [phone]
FOR KP2 VIDEO TELEMATICS CAMERA
QUICK START INSTALLATION GUIDE