Eco-Systems Akebono RE-1014 User manual

RE-1014 / Setup Diagrams
Page 1
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

RE-1014 / Setup Diagrams
Page 2
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

RE-1014 / Setup Diagrams
Page 3
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING

RE-1014 / Setup Diagrams (RE-1201 Counter)
Page 4
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Setup Instructions:
A) Use standoff screws to secure the front panel with
door and back panel of the pedestal to the side panels.
B) After assembling front, back, and side panels,
slide floor into the bottom of the pedestal. The
floor will sit on pins on the inside of the side panels.
C) After floor is in place, use velcro attachments to
install shelf.
Standoff
Screw
Front Panel
with Door
Floor
Velcro Attach
Shelf Supports
Shelf
Attach the oval counter
top to the pedestal base.