Ecomax ECA80 User manual

WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to
follow the safety rules and other basic safety precautions may result in serious personal injury.
Save this instructions in a safe place and on hand so that they can be read when required.
JUMP STARTER
Model: ECA80

CONTENTS
01
INSTALLING THE HOSE REEL
A. PRODUCT LAYOUT
B. OPERATION GUIDANCE
C. PARTS LIST
D. TECHNICAL SPECIFICATIONS
E. FAQ
F. TROUBLE SHOOTING
G. TOXIC AND HARMFUL SUBSTANCES
H. WARNING
I . WARRANTY INFORMATION
WARRANTY 10
01
02
05
05
06
06
07
07
09

INSTALLING THE HOSE REEL
Thank you for choosing the EPower! Always follow basic
safety precautions when using electrical appliances.
Read all instructions carefully, Please keep this
instruction manual for easy reference.
A. PRODUCT LAYOUT
Switch
Digital Display
PD30W
In/Output port
Quick Charge
output port
LED Flash Light
Jump start socket
Jump start socket PD30W
In/Output port
Intelligent jumper
cable
01

B. OPERATION GUIDANCE
Digital display:
Power display: 100%, indicating that the battery has 100% power;
when the product is low, it needs to be delivered in time. Charge
the product. When"IN"is displayed, it indicates that the PD30W
charging function is being used. When “OUT” is displayed, it
means that the PD30W output function is being used. When
“OUT Quick Charge” is displayed, it means that the 5V2.4A/fast
charge output function is being used.
Epower Charging Instruction：
1. Plug the USB charger cable to any working USB output port.
2. Connect the PD30W connector to the EPOWER host.
Jump start 12V vehicle Instruction:
1. Connect the blue plug fully seated into the host, and make
sure the Cable Indicator is off.
2. Connect Red Clamp to the positive (+) battery terminal, Black
Clamp to the negative (-) battery terminal.
3. Operate following the instruction of the Cable Indicator:
02

03
GREEN LIGHT on:
Telling the connection is correct
and the circuit is working, you can
turn on the engine to jump-start
directly.
RED LIGHT on with buzzing:
Telling the connection is wrong,
and buzzing to alarm to correct the
clamps as step 2 mentioned above,
wait until the GREEN LIGHT is on to
turn on the engine.
GREEN LIGHT blinking:
Saying the vehicle battery is low,
press the “BOOST” button, wait
GREEN LIGHT becomes solid, then
turn on the engine within 30s.
Beep, Beep
+
-
+
-
+
-

04
No Lights on, No buzzing:
Saying the vehicle's battery maybe
damaged, after confirm the clamps
connection is correct, press the
“BOOST” button, wait GREEN
LIGHT is on, and then turn on the
engine within 30s.
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from the
vehicle battery. Leave the vehicle's engine running.
Charging Cell Phone or Tablet Instruction:
1. Plug the switch cable to Quick Charge output port.
2. Select appropriate connector and connect it to your mobile
phones or tablet.
3. Touch the switch button, it can recognise eletronic products's
suitable parameters, start to charge for mobile phone/tabletc etc.
+
-

D. TECHNICAL SPECIFICATIONS
Dimension: 186*98*37mm
Weight: 590g
Battery Capacity: 15000 mAh (55.5 Wh)
Output: Quick Charge (5V 3A; 9V 2A; 12V 1.5A);
12V jump start
PD30W(5V 3A, 9V 3A,
12V 2. 5A, 15V 2A,
20V 1.5A)
Input: PD30W(5V 3A, 9V 3A, 12V 2. 5A, 15V 2A,
20V 1.5A)
Full charging time: About 2 hours
Start current: 350A
Peak current: 1500A
Operating temperature : -20℃~60℃
LED flash light
Press the switch 3 seconds to start the LED flash light. There are 4
modes of LED light appear in order (normal. strobe. SOS. off) if
you press slightly.
C. PARTS LIST
#
1
2
3
4
Parts Name
Host
Switch cable
Intelligent jumper cable
Type-C Charge Cable
Quantity
1
1
1
1
05

E. FAQ
Q. How to turn off this appliance?
A. This appliance will power off automatically when no load or
charging is complete
Q. How long time to full charge the EPOWER?
A. Approx.2 hours through the PD30W input port.
Q. How many times can this appliance charge for my cell phone?
A. Depend on the battery capacity of your cell phone. Take
iPhone6 as an example, can full charging 4 times.
Q. How many times can this appliance jump start the 3.0L
gasoline if it is in full battery?
A. Approx. 15 times.
Q. What's the lifetime of EPOWER?
A. Usually 3-5 years in normal condition.
Q. How long the storage of battery will remain?
A. 6-12 months, however, we suggest to recharge it every 3
months.
F. TROUBLE SHOOTING
Finding
No response when pressing the switch button.
Cause
Low voltage protection of EPower is started.
Remedies
Plug the adaptor into the Quick Charge input port to activate.
06

G. TOXIC AND HARMFUL SUBSTANCES
Composition and amount of toxic and harmful substances
in Epower.
Pb Hg Cd Cr(Vi) PBB PBDE
O O O O O O
O： Indicate all homogeneous materials' hazardous
substances content are below the MCV limit specified in
the Standard 2002/95/EC(RoHs).
H. WARNING
1. Read the instruction manual carefully before using this unit.
2. DO NOT use in place of a vehicle battery.
3. Do NOT use as a toy.
4.T o reduce the risk of injury, close supervision is necessary when
the product is used near children.
5. Jump for 12V vehicles , it would be hazard if for other jumping.
6.Use of an attachment not recommended or sold by power
pack manufacturer may result in a risk of fire, electric shock, or
injury to persons.
7. D o NOT connect the two clamps together.
8. Before starting, ensure that there is no corrosion at the
interface and no foreign matter adheres. Connect the main unit
to the battery holder tightly to avoid the impact of the interface
connection.
9. After successfully starting the car, please remove the product
from the car battery within 30s, otherwise it may cause damage.
10. Do NOT Jump Start more than 3 times in a row, It could
damage the unit by overheating. When starting up multiple
times, each start-up interval is two minutes.
07

11. Don’t use the jumper cable to charge other equipments.
12. Do NOT store in locations where the temperature may
exceed 60℃
13. Charge only at ambient temperature between 0℃ and 45℃.
14. Do not expose the product to rain or water
15. Do NOT expose product to extreme heat or fire.
16. D o NOT operate the product in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
17. Make sure someone should be within range of your voice or
close enough to come to your aid when working with batteries.
18. Remove personal metal items like rings, bracelets, necklaces,
etc. When using the products.
19. To reduce risk of damage to the electric plug and cord, pull
the plug rather than the cord when disconnecting the power
pack.
20. Do not use a battery pack or appliance that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
21. Charge only using the charger provided with this unit or the
same standard with the host input port.
22. After jump start the car, don’t charge this unit immediately.
23. Do NOT use the unit to jump start a vehicle while charging
the internal battery.
24. Under extreme conditions, the battery may leak. If a liquid is
noticed coming from product do not handle with bare hands. In
case of skin contact wash with soap and water immediately. If
liquid comes in contact with eyes rinse eyes with cold running
water for at least 10 minutes and get medical attention
immediately.
25. Product contains lithium based battery, at end of product life
dispose of product according to local regulation.
08

09
I. WARRANTY INFORMATION
1. We offer a limited warranty for this product against any
defects in material and workmanship for a period of 6 months
from the date of purchase by the end user/consumer. The
conditions of the warranty are as follows:
2. The warranty is only valid upon presentation of the original
receipt (from dealer/retailer) by the original purchaser with the
product to be repaired or replaced.
3. The warranty is void if the serial number, date of purchase and
label has been removed.
4. The warranty does not cover damage or product failure
resulting from normal wear and tear, physical abuse, improper
installation, misuse, modification or repairs by unauthorized third
parties.
5. We do not assume responsibility for any loss or damage
incurred during shipment or as a result of a force majeure.
6. We are not liable for any incidental or consequential damages
arising from the use or misuse of this product.
7. All warranty claims are limited to repair or replacement of the
defective product and at the sole discretion of us.
8. If we repair or replace the product, the product will be covered
for the remaining time of the original warranty period. Repair or
replacement may involve the use of reconditioned units which
are equivalent in function. Replaced part or product becomes the
property of us.
9.C onsumable components such as batteries are not covered by
the warranty.
Overcharge and
Overdischarge Protection Fuse Protection Against-reverse Plug

ALTON INDUSTRY LTD. GROUP
2-YEAR LIMITED WARRANTY
This warranty covers any defects in materials or
workmanship of the enclosed product. Alton Industry
Ltd. Group will repair or replace any defective materials
due to craftsmanship of the product. This warranty does
not cover any problem caused by misuse, abuse,
accidents or acts of God, such as floods or hurricanes.
Consequential and incidental damages are not covered
under this warranty. Coverage terminates if you sell or
otherwise transfer the ownership. If you feel you have a
defective product, please submit a copy of your receipt
to the address below and call 1-888-899-0146 for
instructions prior returning this item to the store or
sending back to:
Alton Industry Ltd. Group
643 Innovation Drive
West Chicago, IL 60185
We will inspect the product and contact you within 72
hours to give you the results of our inspection. We
reserve the right to repair or replace the product at our
discretion. However, we may replace the product with
one of similar but not exact features. Parts and Service
Information available call Alton Industry at 1-888-899-
0146. This warranty gives you specific legal rights. You
may have other rights which vary from state to state.
WARRANTY
10