EdgeStar OBR901SS User manual

ii
V2.0-07262019
Outdoor Beverage Refrigerator
Owner’s Manual
For more information on other great EdgeStar products on the web, go to http://www.edgestar.com
To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com
OBR901SS

i
Important Safety Information
Improper handling can cause serious damage to the EdgeStar outdoor beverage refrigerator
and / or injury to the user. This outdoor beverage refrigerator is designed for domestic indoor
use only. Do not use the unit for industrial or commercial use. Any other use may
invalidate the warranty. Please review the ratings label located on the rear panel of the unit for
electrical and other technical data related to this unit. The unit must be used in a properly
grounded wall outlet.
Please read and follow the safety information listed below to reduce the risk of fire,
electric shock, or injury.
Electrical Safety
•This unit must be protected from the elements such as dirt, dust, sand, rain, sleet, snow, and / or
moisture.
•Do not exceed the power outlet ratings.
•It is recommended the refrigerator be connected on its own circuit.
•The unit must be installed in accordance with state and local electrical codes.
•A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required.
•Use outlets that cannot be turned off by a switch or pull chain.
•Unplug the unit if you are going to clean it or when it is not going to be used for an extended period
of time.
•Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose
socket. If the power cord is damaged, it must be replaced by the manufacturer or a qualified
technician.
•Be sure the outdoor beverage refrigerator is properly grounded.
•Never plug or unplug the unit with wet hands.
•Do not bypass, cut, or remove the grounding plug.
•Do not use extension cords or power strips with this unit. You may need to contact your electrician if
it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the
power cord’s length or share the outlet with other appliances.
•Do not start or stop the unit by switching the circuit’s power on and off.
•Never repair the unit while it is plugged in.
•Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and
contact customer service.
•Do not remove any part of the casing unless you are instructed to do so by an authorized
technician.
•You should never attempt to repair the unit yourself.
•Contact customer service for service options if the unit needs service.

ii
Note: This owner’s manual is provided for reference use only. Specifications may change
without prior notice. Refer to the product label on the back of your outdoor beverage
refrigerator for the latest technical information.
General Safety
•To prevent back and other types of injuries, use at least two people to move and install the unit.
•This appliance is not intended for use by persons, including children, with reduced physical, sensory
or mental capabilities, unless they have been given supervision or instruction concerning the use of
the appliance by the person(s) responsible for their safety.
•Install the outdoor beverage refrigerator in a well-ventilated area where the ambient temperature is
above 40° F and below 100° F.
•The temperature range for this cooler is optimized for beverage storage. Perishable food items may
require a different storage environment.
•Do not place hot or warm items into the cooler before they cool down to room temperature.
•In a rainy environment, a water-proof covering is recommended.
•This unit is not intended to be used by children.
•Children should be supervised to ensure that they do not play with this product.
•Never allow children to crawl inside the appliance. If you are disposing of the unit, remove the door.
•Do not use this appliance near flammable gas or combustibles, such as gasoline, benzene, thinner,
etc.
•Only use in an upright position on a flat, level surface and provide proper ventilation.
•Do not pinch or kink the power supply line between the unit and cabinet.
•Do not leave any cleaning solutions in the unit.
•Do not use solvent-based cleaning agents or abrasive solutions to clean the unit as they may
damage the interior and exterior.
•Do not place any other appliances on top of the unit.
•Do not turn the unit upside down, on its side, or at an angle off level.
•If your model of refrigerator is equipped with a lock, take care to keep the keys away from children.
•Do not move the unit without emptying the contents and securing the door in a closed position.

iii
Table of Contents
IMPORTANT SAFETY INFORMATION……………………………………………………………………………………...I
TABLE OF CONTENTS………………………………………………………………………………………………………..III
FIRST TIME OPERATING INSTRUCTIONS………………………………………………………………………………………….4
INTRODUCTION……………………………………………………………………………………………………………….. 4
PARTS IDENTIFICATION…………………………………………………………………………………………………….. 5
FRONT VIEW……………………………………………………………………………………………………………………….5
REMOVING THE SHELVES………………………………………………………………………………………………….. 6
INSTALLING THE OUTDOOR BEVERAGE REFRIGERATOR…………………………………………………………..6
UNPACKING THE OUTDOOR BEVERAGE REFRIGERATOR………………………………………………………………………. 6
TYPES OF INSTALLATION………………………………………………………………………………………………………….6
Freestanding Installation……………………………………………………………………………………………………… 6
Built-in Installation……………………………………………………………………………………………………………….6
INSTALLATION CLEARANCE REQUIREMENTS……………………………………………………………………………………..7
ELECTRICAL REQUIREMENTS……………………………………………………………………………………………………. 8
Recommended Grounding Method……………………………………………………………………………………………8
LEVELING THE OUTDOOR BEVERAGE REFRIGERATOR…………………………………………………………………………..8
INSTALLATION CHECK LIST BEFORE OPERATION……………………………………………………………………………….. 9
OPERATION……………………………………………………………………………………………………………………. 10
CONTROL PANEL OVERVIEW…………………………………………………………………………………………………….. 10
USING THE TEMPERATURE CONTROL PANEL…………………………………………………………………………………… 10
Adjusting the Temperature……………………………………………………………………………………………………..11
Interior Light……………………………………………………………………………………………………………………...11
Alarm Mode Indicator…………………………………………………………………………………………………………...11
Compressor Run Indicator…………………………………………………………………………………………………….. 11
Control Panel LCD………………………………………………………………………………………………………………11
NORMAL SOUNDS…………………………………………………………………………………………………………………12
DEFROSTING………………………………………………………………………………………………………………………12
PREPARING THE BEVERAGE REFRIGERATOR FOR STORAGE……………………………………………………………………12
CLEANING AND MAINTENANCE……………………………………………………………………………………………13
EXTERIOR CLEANING…………………………………………………………………………………………………………….. 13
INTERIOR CLEANING………………………………………………………………………………………………………………13
TROUBLESHOOTING………………………………………………………………………………………………………… 14
SPECIFICATIONS………………………………………………………………………………………………………………16
EDGESTAR LIMITED WARRANTY…………………………………………………………………………………………. 17

4
First Time Operating Instructions
Before use, make sure all packaging labels and materials are all removed from the unit. Be sure
to keep track of all included parts and pieces before discarding packaging materials. It is advised
that you keep the original box and packaging materials in case you are ever to move or ship the
appliance in the future.
Let the unit stand for at least 24 hours before you use it; this allows the cooling components time
to settle from transit. The instruction manual should be read before use.
Introduction
Thank you for purchasing this EdgeStar outdoor beverage refrigerator. We hope that this purchase
will be the beginning of a lasting and rewarding relationship between you and EdgeStar. We will
provide the customer support and exemplary products necessary to nurture that relationship.
This manual contains important information regarding the proper installation, use and
maintenance of your outdoor beverage refrigerator. Following this manual will ensure that your
product will work at its peak performance and efficiency.
Please save the original product packaging in case you need to safely transport your outdoor
beverage refrigerator.
For Your Records:
Please write down the model number and serial number below for future reference.
Both numbers are located on the ratings label on the back of your unit and are needed
to obtain warranty service. You may also want to staple your receipt to this manual as it
is the proof of your purchase and is also needed for service under your warranty.
Model Number:
Serial Number:
Date of Purchase:
For a more efficient experience, please do the following before contacting customer service:
•If you received a damaged product, immediately contact the retailer or dealer that sold you
the product.
•Read and follow this instruction manual carefully to help you install, use, and maintain your
outdoor beverage refrigerator.
•Read the troubleshooting section of this manual as it will help you diagnose and solve
common issues.
•Visit us on the web at http:/www.edgestar.com to register your product, download product
guides, and access additional troubleshooting resources and up-to-date information. You can
also find an interactive self-diagnostic tool at https://support.edgestar.com
•If you need warranty service, our friendly customer service representatives are available via
email at [email protected].

5
Tip: Gather the model and serial number from the product label and write them down before
installing the outdoor beverage refrigerator.
Parts Identification
Back View
Front View

6
Warning: Use two or more people to move and install the outdoor beverage refrigerator.
Failure to do so can result in back or other injury. Carefully remove the packaging materials.
Remove any shipping tape and glue from your outdoor beverage refrigerator before use. Do
not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the surface of your outdoor beverage refrigerator.
Important: Do not remove any safety, warning, or product information labels from your outdoor
beverage refrigerator.
Internal Fan
This unit is equipped with an internal fan that maintains a consistent internal temperature.
Installing the Outdoor Beverage Refrigerator
The outdoor beverage refrigerator should be installed in accordance with local electrical code
requirements. The refrigerator should also be placed in a location that is strong enough to
support its total weight, keeping in mind that it will weigh substantially more when fully loaded
than when empty. Before you plug the beverage refrigerator into a power supply, be sure
to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the Outdoor Beverage Refrigerator
Types of Installation
This outdoor beverage refrigerator has been designed for freestanding or built-in installation. In
each case, there must be adequate ventilation and access for service.
Freestanding Installation:
A freestanding installation will allow you to install the outdoor beverage refrigerator in almost
any place you desire. You must follow the stated instructions for electrical requirements, and
leveling the outdoor beverage refrigerator.
Built-in Installation:
A recessed installation will allow you to install the beverage cooler under a counter or in a
kitchen cabinet provided the required clearance space around the beverage cooler is
fulfilled. It is necessary to allow adequate ventilation space around the unit, including the
back. The following additional items must be observed:
1. Place the outdoor beverage refrigerator in front of the installation location. Adjust the
feet and place the unit flat on the floor or on a platform depending on your installation
requirements.
2. If the electrical outlet for the outdoor beverage refrigerator is behind the cabinet, plug
in the outdoor beverage refrigerator.
3. Push the outdoor beverage refrigerator into position.
Warning: Do NOT install the outdoor beverage refrigerator behind a closed cabinet door.

7
Important Notes:
• Choose a location that has ambient temperatures above 40° F and below 100° F. Operation
outside these temperatures may result in lowered efficiency or cause other adverse effects.
• This unit MUST be installed in an area protected from the elements, e.g. dust, sand, rain,
water spray or drips, sleet, and snow.
• In a rainy environment, a water-proof covering is recommended.
Installation Clearance Requirements
When installing the outdoor beverage refrigerator under a counter, follow the recommended
spacing dimensions shown.
• To ensure proper service access and ventilation, allow at least 1/2” clearance at the back, 1”
at the top and 1/2” at the sides. The installation should allow the unit to be pulled forward for
servicing, if necessary.
• The outdoor beverage refrigerator should be installed on a firm and level surface that will
be able to support the entire weight of a fully loaded unit. It is important for the outdoor
beverage refrigerator to be level in order to work properly. If needed, you can adjust the
height of the outdoor beverage refrigerator by rotating the feet. See the “Leveling the
Outdoor Beverage Refrigerator” section.
•A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with
National Electrical Code and local codes and ordinances, is required.

8
ELECTRIC SHOCK HAZARD!
•Plug into a grounded 3-prong outlet.
•Never remove the grounding prong from the plug.
•Never use an adapter to bypass the grounding prong.
•DO NOT use an extension cord.
•Failure to follow these instructions can result in fire, electrical shock, or death.
Important: Once you are ready to install it in a cabinet or directly on the floor, you must adjust
the feet to level the outdoor beverage refrigerator.
Electrical Requirements
Before you move your outdoor beverage refrigerator into its final location, it is important to
make sure you have the proper electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National
Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your outdoor beverage refrigerator, be
provided. Use receptacles that cannot be turned off by a switch or pull chain.
The fuse (or circuit breaker) size should be 15 Amps.
Recommended Grounding Method
For your personal safety, this appliance must be grounded. It is equipped with a power
supply cord that has a 3-pronged grounding plug. To minimize possible shock hazard, the
cord must be plugged into a mating 3-pronged wall socket and grounded in accordance with
the National Electrical Code and local codes and ordinances. If a mating wall socket is not
available, it is the personal responsibility of the customer to have a properly grounded, 3-
prong wall receptacle installed by a qualified electrician.
Leveling the Outdoor Beverage Refrigerator
It is important for the refrigerator to be leveled in order to work properly. It
can be raised or lowered by rotating the plastic sheaths around each of the
feet on the bottom of the machine. If you find that the surface is not level,
rotate the feet until the outdoor beverage refrigerator becomes level. You
may need to make several adjustments to level it. We recommend using a
carpenter’s level to check the machine.
1. Place a carpenter’s level on top of the product to see if the refrigerator is
level from front to back and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet to the right to lower that side of the refrigerator.
Turn the leveling feet to the left to raise that side of the refrigerator.

9
Installing and Removing the Shelves
To prevent damaging a door gasket, make sure to open the door all the way before pulling the
shelves out of their track.
To Install the Shelves:
1. Open the door completely.
2. Place the back of the shelf onto the shelf track with the front of the shelf elevated at a 45°
angle.
3. Slowly slide the shelf back on the shelf track until it stops.
4. Gently place the front of the shelf down.
To Remove the Shelves:
1. Open the door completely.
2. If necessary, make sure you remove all the contents sitting on the shelf.
3. Pull the shelf forward until it stops.
4. Lift up the front of the shelf and remove it from the unit.
5. Continue to pull the shelf forward until it is completely removed from the inner
compartment.
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
outdoor beverage refrigerator?
2. Have the installation instructions been followed, including connecting the machine to
electricity, and has proper grounding been installed for the outdoor beverage refrigerator?
3. Has the machine been leveled?
4. Is the outdoor beverage refrigerator in a site where the ambient temperature is between
40° F and 100° F all year round?
5. Is the unit installed in an area protected from the elements, e.g. dust, sand, rain, water
spray or drips, sleet, and snow?
6. Is there a clearance of at least ½” at the rear, 1” at the top, and ½” at the sides for proper
air circulation?