EDI EDV225MPC-2L-N1-VT User manual

ELECTRONIC DISPLAYS INC.
135 S. CHURCH STREET
ADDISON, ILL. 60101
www.electronicdisplays.com
EDV225MPC-2L-N1-VT
Parts List:
-2 Line LED Display with Power Cable
-IR Remote with Battery
-Photo-eye with Reflective Plate
EDV Pro uction Scoreboar Quick Setup
The EDV pro uction scoreboar is a 2 line mo el that isplays “GOAL” (top line) an
“ACTUAL” (bottom line). Both lines are preset an reset through the supplie IR remote.
The ACTUAL (bottom line) can be configure using a supplie photo-eye an reflective
plate or a momentary contact closure.

To configure the display using the R remote follow these instructions:
Preset Top Line
Enter the ED T mo e
1. To e it the top line, point the IR remote towar the center of the isplay. Press /
Hol the “T ME” button until the LED ot in the lower right corner of the least
significant igit flashes.
2. Press the “DEL” button to clear the isplay to “0”
3. Enter the esire preset numbers
4. Press the “OK” button to save
Preset Bottom Line
Enter the ED T mo e
1. To e it the bottom line, point the IR remote towar the center of the isplay.
Press / Hol the “SET” button until the LED ot in the lower right corner of the
least significant igit flashes.
2. Press the “DEL” button to clear the isplay to “0”
3. Enter the esire preset numbers
4. Press the “OK” button to save
Change ncrement value (Bottom Line)
1. Press ”F2” on the remote. Top line will change to the current increment value set.
2. Press the “DEL” button to clear out the current increment value.
3. Input esire Increment value through the remote.
4. Press the “OK” button to save
Notes
•A photo-eye an reflective plate are provi e with the sign. The reflective plate nee s to be
installe in the irection the photo-eye is being pointe at. The photo-eye operates by
sen ing an infrare beam in the irection that it is being pointe . The plate will reflect the
IR beam back to the photo-eye thus incrementing the bottom line of the isplay. Each time
the beam is broken, the bottom line will increment by one.
•The power (PWR) button on the remote oes not turn the isplay on or off.
________________________________________________________________________
Please visit our website for more information:
www.electronic isplays.com
Or Call: 1-800-367-6056
Or Our Support Website:
http://e isupport.helpserve.com/