EefaCo.Store Essex MS987400TX User manual
“
Essex” 54”W TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Hardware shown actual size. Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit
B
Quantity
of 1 Quantity
of 1
Quantity
of 1
A C
Left Side Panel
Right Side Panel
E F
Quantity
of 1
Bottom Panel
Quantity
of 1
D
Quantity
of 1
G H I
Quantity
of 2 Quantity
of 2
Middle Panel Support Post
T
op Panel
Sliding Door Shel
f
Back Panel
Quantity
of 1
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
“
Essex” 54”W TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Hardware shown actual size. Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit
(1) (2)
Quantity
of 12 Quantity
of 14
8mm x 30 mm
Wood Dowel
1/4
”
x 1
”
Bolt
(3) (4)
Quantity
of 2 Quantity
of 4
5/32” x 15mm
Bolt For Handle
(5) (6)
Quantity
of 8 Quantity
of 17
Metal Handle
3.5mm x 12 mm
Screw For Back
Metal P
in
Assembly Tool Required
No. 2 Phillips Screwdriver
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)
“
Essex” 54”W TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Step 2. Put the Bottom Panel (A) on
the soft working surface.
Step 3. Insert the Wood Dowels(1)
into predrilled holes in Side
Panels(B,C) and Middle Panel(D).
Step 4. Attach Side Panels(B,C) and
Middle Panel(D)to the Bottom
Panel(A) with Bolt(2), then
fasten them.
Step 5. Attach Support Post(E) to
Bottom Panel(A)with Bolt(2),
then fasten them.
Step 1. Insert the Wood Dowels(1)
into predrilled holes in Side
Panels(B,C) and Middle
Panel(D).
Step 2. Attach Top Panel(F) to the
Side Panels(B,C) and Middle
Panel(D) with Bolt(2), then
fasten them.
(1)
(2)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 6
Quantity
of 8
(1)
(2)
1/4” x 1” Bolt
8mm x 30 mm
Wood Dowel
Quantity
of 6
Quantity
of 6
Fi
g
ure 1
Fi
g
ure 2
“
Essex” 54”W TV/Media Stand
Assembly Instructions
Step 1. Insert the Sliding Door(G) into
the groove in the Top
Panel(F) and Bottom Panel(A).
Step 2. Attach Metal Handle(3) to
Sliding Door(G) with Bolt for
Metal Handle(4).
Step 1. Insert Metal Pins(5) to Side
Panels(B,C) and Middle
Panel(D).
Step 2. Put the Shelves (H) above
the Metal Pins(5).
Step 1. Attach the Back Panel(I) as
pictured with Screw For
Back(6),then fasten them.
(6)
Quantity
of 17
(3)
(5)
Metal Pin
Quantity
of 8
Metal Handle
Quantity
of 2
(4)
5/32” x 15mm Bolt For Handle
Quantity
of 4
Fi
g
ure 3
Fi
g
ure 4
3.5mm x 12 mm
Screw For Back
Fi
g
ure 5
MS987400TX
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Lette
r
Parts Description
Quantity Needed
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts.
Southern Enterprises Inc. Will provide replacement parts for only those items purchased within the last
9 months. If this product has not been purchased from our retail affiliates (within 9 months), we are
under no obligation to provide parts or replacement merchandise. Parts will not be available for items
arriving fully assembled Prts will be sent f available from SEI.
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
The top shelf of this cabinet is intended for plasma/LCD televisions having a
maximum screen size of 52” and weight of 175 lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side shelf
should not be loaded with more than 15 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
CAUTION
Table of contents
