EGPIS HD2100 User manual

LIVE DPC (AUTO)
RS 485 (OPTIONAL)
-
DC 12V(±10%)
250mA (MAX)
-10ºC~ +50ºC / MAX 90% RH
EGPIS-HD2100
1936(H) x 1097(V)
Electronic Shutter
OFF/AUTO(1/30~1/50,000)FLK
MANUAL(x2~x30)
OFF/AUTO(1/25~1/50,000)FLK
MANUAL(x2~x30)
x2
Key Features
DEFECT
Communication
IR LED
Input Voltage
Power Consumption
SENS-UP
Operating Temp. / Hum.
Storage Temp. / Hum.
-20ºC~ +60ºC / MAX 90% RH
Effective Pixels
Scanning System
Video Output
S/N Ratio
Min. Illumination
IRIS Adjustment
Lens
1XHD-SDI, 1XBNC, 75Ω composite
Progressive
More than 50dB
0.02Lux (SENS-UP x30)
DC / MANUAL
3.7mm MEGAPIXEL LENS
Serious damage within 10 days from purchase
A/S without cost
Product
exchange
Damage by customer’s negligence
Warranty details
chargeable
case even
within
warranty
1. Damage by customer’s careless handling
2. Damage by natural disaster (Fire, Flood, etc.)
3. Damage by not keeping the cautions and instructions on manual
4. Damage by not using appointed power(frequency, voltage) or adapter.
5. Damage by disassemble or cleaning by customer
6. Damage by repairment by a person excepting the dealer
A/S with cost
◈A/S with cost◈
Product
Serious damage within 1 month from purchase
Serious damage within 1 month from exchange
Not available for exchange
Not available for repairment
When damages
occurred in
nomal working
environment
NTSC
PAL
SPECIFICATION
DIMENSION
DESCRIPTION
Image Sensor
1/3” 2.1 Megapixel Sony HD Image Sensor
Type of damage
Warranty details
Within warranty
After Warranty
We guarantee this product according to consumer injury compensation rule.
▶
▶
Please contact purchasing office or service center when you find any damage or
problem with this product.
▶
The warranty period is 2 year.
◈A/S without cost◈
DOME CAMERA
WARRANTY
1/3” 2.1 Megapixel Sony HD Image Sensor
∙
∙
2DNR/3DNR / SMART NR
∙
0.02Lux (SENS-UP x30)
Product
HD-SDI DOME CAMERA
Model
Serial No.
EGPIS-HD2100
Warranty Period : 2 year
Customer
Purchase
Address
Dealer
(Year) (Month) (Date)
(TEL. )
Representtative

◆
◆
◆
CAUTION IN INSTALLATION
Assemble the main body of the camera with lens quickly
at a clear place to avoid dust.
HD-SDI CONNECTION (STANDARD)
♣
Do not try to fix even if the camera does not work.
♣
Installation this camera at safety place where is no water.
If the camera has some problems with water accidently.
You have to contact A/S centre that sold the camera to you.
♣
The camera should be worked within a range of the
allowable temperature that refers to specification.
♣
If you would like to relocate the already installed product,
be sure to turn off the power and then move or reinstall it.
CONNECTION OF CAMERA
♣
Please contact the nearest A/S centre if you find out any
Problems. Please do not ignore any small problems they
can become a big problem.
♣
Please connect video output of a camera with video input of a
monitor or other devices. In case of connecting more than two
monitors, just set turning on 75 ohm switch of last monitor.
please choose a proper cable as following connected device
and distance.
♣
Be careful not to drop this camera and not to impact on it.
CCTV camera is a precision machine.
♣
Do not install the camera opposite of the sun so that it be
avoided direct light.
♣
Do not pull the cable. If you pull the cable, it will make
electrical problems such as disconnection.
The power adaptor must be more than DC12V 1A.
Do not turn on a power before you finish to connect the
camera with all devices.