ELCOM Uniq Display 15" User manual
Uniq Display 15½
User manual
version 1.0.0
&/(-*4)
17
Uniq Monitor
&/(-*4)
contentS
........................................................................................................................18
..........................................................................................................................................18
........................................................................................................19
...........................................................................................................19
..................................................................................................................22
............................................................................................................................................22
Turning On and Off ..............................................................................................................22
Menu ................................................................................................................................23
Working with menus ......................................................................................................24
Switching the display brightness ............................................................................................24
.........................................................................................24
Installing the touch panel drivers ............................................................................................25
Windows .....................................................................................................................25
Linux and other supported operating systems ....................................................................25
.......................................................................................................25
4-Point Calibration ..............................................................................................................26
Clear and Calibrate .............................................................................................................26
Linearization.......................................................................................................................26
Draw Test ..........................................................................................................................26
.........................................................................................................................27
..............................................................................................................28
Placement on a vertical surface (wall) for standard stand ............................................................29
Tube holder 500 mm and 1300 mm .......................................................................................29
introduction
Thank you for choosing the Uniq Display. Please read this user manual before you begin using the equipment
in order to become familiar with its features and functions. Also keep this user manual for future use. It will help
you solve problems that may arise.
• Do not leave switched-on equipment unattended!
• Install the product in a place where it will not be exposed to direct sunlight, unusual changes in tem-
perature (below 0°C and over 40°C) or high humidity. Installation in an unsuitable place could cause
damage to the casing and electrical components
• When transferring the product between environments with different temperatures, do not switch it on for
at least 60 minutes.
• Never use aggressive cleaning solutions when cleaning the product surface. The use of unsuitable
cleaning solutions can cause damage to the product.
• If the product is not functioning properly, turn to an authorized service technician. Do not attempt to
repair the product yourself. Never open the product casing!
• When plugging in this equipment always use the power adapter supplied or one exclusively authorized
by the seller. The use of another resource can lead to damage to the source or the product.
• The adapter is specified for interior use only!
• The use of sharp objects for handling the touch screen panel can seriously damage or destroy it.
• This product cannot be cleaned using a strong stream of spraying water, nor can it be submerged in
water.
• Some electrical equipment producing interference and connected to the same electrical circuit can
cause the improper functioning of the equipment. In such cases, use a special anti-jamming device
recommended by the manufacturer.
• To fully disconnect the device from the electrical network unplug it from the electrical socket.
• The manufacturer is not responsible for any damage caused to the product in the case of improper
maintenance or use in a different manner than is described in these instructions.
•
The symbol (a crossed-out wastebasket) on the product or its packaging means that the product,
upon completion of its lifespan, should not be disposed of in common household waste, but
must be taken to a collection point designated for the collection of worn-out electrical and
electronic appliances. Proper liquidation of this product can help preserve natural resources
and helps in the prevention of negative impacts on the environment and human health.
•
The product contributes to environmental protection through the use of lead-free technology
during its production.
18
Introduction
&/(-*4)
Product deScriPtion
The Uniq Display is a strudy computer display. The high-quality production and wide possibilities for use make
the Uniq Display a unique solution for your business. The Uniq Display is designated mainly for commercial
operations, private and public institutions, or for the medical sector as a surrogate imaging and optical device
in environments with high demands on air quality and environment sterility. Optional touch panel further
extends the possibilities of using Uniq Display as a tool for interactive digital presentation of information.
remote
control
sensor
flexible leg
30°
19
Product description
&/(-*4)
TUBE holder
remote
control
sensor
flexible leg 30°
table 1.1.
Type of display TFT LCD (TN)
Diagonal width 15½
Screen resolution 1024 x 768
Aspect ratio 4:3
Touchscreen display resistive / capacitive / capacitive vandalproof (optional)
Touch panel operating system
support (drivers)
Windows XP/Vista/7, Mac OS X, Linux
Interfaces
VGA, USB (optional, USB connector for connecting the touch panel to a PC)
Power Adapter AC/DC 230 V - 12 V, 4200 mA
Placement options the base on a table or wall / tube holder/ VESA 100 (selectable)
Dimensions of the display 351 x 268 mm (H x W, without the base)
Thickness of the display 38 mm (48 mm - vandalproof version)
Weight 4 kg (without the holder)
Construction and
protection
IP 20 - connector‘s side from bottom
IP 54 (except connector‘s side)
antibacterial surface - optional
Operating conditions temperature 0-40°C, humidity 5%-95% (non-condensing)
20
Product description
&/(-*4)
VGA
power
connector
cable holder
USB of the touch panel
power connector
USB
of the touch panel
VGA
21
Product description
&/(-*4)
uSing the device
Note: Remote control should be pointed so that its front end (IR LED) aimed towards the remote control sensor on
Uniq Display. The controls are sufficiently sensitive to the captured commands reflected from the walls and
surrounding objects.
Use supplied remote control to control the Uniq Display. Its functions are described in the following figure.
turning on
and off
unused buttons
entering the menu and
menu navigation
changing settings,
menu item selection
selecting source
of the videosignal
(unused)
programmable button
(by default brightness
mode changing)
Note: Before connecting or disconnecting cables we recommend to shut down the computer and Uniq Display.
Connect the VGA cable to Uniq Display and the other end to your computer. Connect the power adapter to
the Uniq Display and plug the other end into an electrical outlet. If Uniq Display detects the VGA signal on
its VGA input, it turns on automatically (this behavior can be changed in the Uniq Display menu). If this is
not the case, the Uniq Display is turned on and off the by pointing the remote control at the remote sensor
and pressing the POWER button on the remote control. It takes about 3 seconds from pressing the button
until the image is displayed. If a source of the video signal is not connected to the Uniq Display, it will show
the message “No signal input” when turned on.
22
Using the device
&/(-*4)
Uniq Display has built-in menu to adjust picture parameters, the source of video signal and the language of the
menu. If a source of the video signal is not connected to the Uniq Display, the menu can not be displayed.
table 2.1.
Auto adjust... / Réglage automatique... /
Autom. Anpassung... / Ajuste automático...
Automatic adjustment of image parameters. Activated
by pressing the button ► on the remote control.
Brightness / Luminosité / Helligkeit / Luminosidad Adjust the brightness (press ◄ or ►).
Contrast / Contraste / Kontrast / Contraste Adjust the contrast (press ◄ or ►).
Clock / Horogeß / Takt / Reloj This setting can correct blurred edges in picture.
Phase / Phase / Phase /Fase This setting can correct blurred edges in picture.
H.Position / Position–H / H – Position / Posición–H Horizontal picture shift.
V.Position / Position–V / V – Position / Posición–V Vertical picture shift.
Sharpness / Netteté / Schärfe / Nitidez Adjust the picture sharpness.
Recall / Rappel / Wiederruf / Rellamada Restore all picture settings to default values.
Enter the submenu by pressing ►.
Volume/ Volume / Lautstärke/ Volumen Volume control (unavailable).
Mute /Muet / Stummschaltung / Silencio Muting the sound (unavailable).
REVERSE (unavailable)
MIRROR (unavailable)
Color Temperature/ Temperature Coleurs /
Farbtemperatur / Temperatura Colores
Change the color temperature (for higher values the
image is more bluish, for lower more yellowish)
23
Using the device
&/(-*4)
Exit / Quit / Verl / Sali Move to a higher level menu (◄ or ►).
Enter the submenu by pressing ►.
CVBS1 Enable CVBS1 input, (not used).
CVBS2 Enable CVBS2 input, (not used, unavailable).
S_Video Enable S-Video input, (not used).
VGA Enable VGA input.
DVI-D EnableDVI input, (not used).
Signal_in & Play
Select the signal input which will be monitored for the
presence of signal for the automatic turn–on function.
Hotkey define Unused setting.
Language / Langue / Sprache / Idioma Language for menu and OSD (on-screen display)
Exit / Quitter/ Verlassen / Salir Move to a higher level menu (◄ or ►).
Exit / Quitter / Verlassen / Salir Leave menu (press ◄ or ►).
Display setup menu is brought up by pointing the remote control and pressing the MENU button on the remote
control. You can navigate between individual menu items by pressing MENU. It is only possible to move just
one item down each time you press button, after the last item is reached you are moved to the first item.
Menu items which do not have the indication of the currently set value on the right side of the menu line can
be activated by pressing the button ► on the remote control.
Settings in the menu which have the indication of the currently set value on the right side of the menu line
can be adjusted by pressing the ◄ and ► buttons on the remote control.
Menu items that are written in capital letters (except for Spanish and Korean versions of the menu) represent
a submenu in which you enter by pressing the button ► on the remote control.
Display brightness can be easily switched outside menu by pressing the “DIMMER” button between three modes:
Normal - normal brightness, Light - increased brightness (brighter display), Dark - reduced brightness (darker
display). Changing the display brightness is indicated by displaying corresponding word on the screen.
Uniq Display connects to a computer through a standard 15 pin VGA cable. If Uniq Display has a touch panel
installed, it must be connected to the USB port of your PC with a USB A-A cable.
To setup the Uniq Display correctly, you need to set the display resolution for Uniq Display in your operating
system to 1024 x 768 pixels
In order to control the computer using Uniq Display’s touch panel, after connecting the USB cable it is
necessary to install and calibrate the drivers supplied on the CD. Drivers can also be downloaded from the
website www.elcom.eu. Driver installation and calibration is described in the following chapters.
24
Using the device
&/(-*4)
Run the installation program and follow the instructions. During the installation process, in the first step make
sure that the option “Install PS / 2 Interface driver.” is not selected.
Further we recommend to set the option “Do 4 point calibration” to “Next system boot up” or “None“– you
can start calibration at any time manually. Before proceeding from this step, you are prompted to connect the
touch panel – if you have not connected it yet, connect it to PC via USB cable now. If the operating system
prompts to install the driver – Add New Hardware Wizard, close that window.
In the next step, you can choose whether to install support for using multiple touch panels or touch screens
at the same time - “Support Multi Monitor Systems” option. You can check this option even if you are not
currently using multiple touch screens. This gives you the option to add in the future more touch monitors and
configure their touch panels them so that they controlled the monitor on which they are physically located.
In the following steps choose where to install the driver files and wait for the completion of the installation.
From the website www.elcom.eu download and, as necessary, compile and install the drivers from source
following instructions which are attached to them.
Note: The calibration procedure is illustrated on the example with driver version 5.0.0.5017 and the Windows XP
operating system. The procedure is similar for other operating systems.
Before using the touch panel to control the computer it is suitable to calibrate the touch screen display. The
calibration of the panel should be performed if there was a shift of calibration points too.
Calibration shall be performed by Touchkit Configure Utility which was installed with the driver. After its launch
a window will open with the tabs containing configuration options. Select the “Tools” tab as shown.
25
Using the device
&/(-*4)
During calibration, the symbol of a cross with a circle will gradually appear in each corner of the display. For
proper calibration, it is necessary to hold down the center of the symbol until it turns blue. In this way you
ensure the setting of the exact value of position for the pressing point on the display.
This command deletes all calibration settings of parameters on the touch screen display and subsequently
performs a 4-point calibration.
This is the calibration of the 9 or 25 points which are evenly distributed on the touch screen display. By
performing linearization, you will achieve a higher precision and linearity of the touch screen panel. The
process for linearization is similar to that of 4-point calibration.
This tool serves for verifying the accuracy and checking the functionality of the touch screen panel. The “Clear“
button clears the surface and deletes all objects drawn. The command “Quit“ terminates the drawing tool.
26
Using the device
&/(-*4)
In the Touchkit Configure Utility window on the “Setting” tab you can change the touch settings described
below.
table 2.2.
Beep sound feedback of the panel touching
Beep On Touch sound when pressed
Beep On Release sound when released
Frequency tone frequency
Duration tone length
Linearization style option for choosing the type of linearization: 9-point or 25-point
Double click time time interval for making a double click
Double click area amount of movement allowed for the pressure point during double click
Normal mode
change the behavior when the panel is touched (clicking on touch or on release)
Options specific additional setting for the touch screen display
Enable auto right click enables right-click functionality (by prolonged pressing of a single point)
Enable touch switching off the functionality of the touch screen panel
Enable cursor stabilization a function for stabilizing the cursor
27
Using the device
&/(-*4)
Mounting oPtionS
The base of the Uniq Display is adjustable for different ways of placement and mounting. The basic ways of
mounting it are on a table or a wall. The packaging includes the components necessary for its comfortable
and easy placement on these types of basic positions.
Note: For placing a Uniq Display on a wall it is possible to achieve a larger angle of the display tilt by rotating its leg
by 180°. Only an ELCOM service center is authorized to pefrorm this operation.
There are other, less common, solutions for mounting the panel, such as mounting on a tube holder or
using a standardized VESA mount. For these ways of panel mounting, however, a specially prepared base
is necessary for the Uniq Display supplied as a complete solution together with a specially prepared Uniq
Display, either for placement on a tube holder or by using a standardized VESA mount.
28
Mounting options
&/(-*4)
You’ll find in the packaging of the Uniq Display a number of 4 × 16 mm self-tapping screws. For anchoring
the panel, it’s enough to place two screws horizontally at a distance of 176 mm from each other (you can
use the supplied drilling stencil to properly place the holes for screws). The screws must protrude from the
wall by at least 2-3 mm, in order to hang the panel from them. The base of the Uniq Display has on its bottom
side metal slats with cut-out holes for hanging the panel. It may also be suspended in a position rotated by
180° according to the method of use. Always suspend the Uniq Display such that the narrower side of the
screw holes is pointed upward; that is, always on the holes in the upper metal slat. It is possible to glue one,
or if necessary, more anti-slip sticky pads on the lower metal slats of the Uniq Display base. This ensures
the cushioned setting of the base on the surface.
9*$
The base tube is a solid and firm solution with an intelligent design and protected cables. The cables are led
through a metal tube in the base and this type of construction guarantees a high degree of IP 54 coverage.
The base is anchored with the help of four screws to a table or another object. For anchoring the base to a
ceiling it is necessary to change the position of the display by rotating it 180°.
¡
29
Mounting options
&/(-*4)
You can alter the position of the rotated base by loosening the four screws from the bottom of the base and
by setting the required angle of rotation. For assuring the position, it is necessary to fasten the screws back
and thus anchor the base to the table.
¡
;
30
Mounting options
&/(-*4)
31
Poznámky / Notes
Tento manuál neprešiel jazykovou korektúrou.
Tento manuál a ani žiadna z jeho častí nesmú byť kopírované, alebo inak šírené bez súhlasu firmy
ELCOM, spoločnosť s ručením obmedzeným, Prešov.
Všetky práva vyhradené.
This manual was not subject to any language revision.
This manual or any part of it may not be copied, reproduced or otherwise distributed without the
consent of the company ELCOM, spoločnosť s ručením obmedzeným, Prešov.
All rights reserved.
© 2012, ELCOM, spoločnosť s ručením obmedzeným, Prešov
Table of contents
