Electro-Voice ZX3 User manual

The new Electro-Voice ZX3 offers an unprecedented level of
lightweight, 12” two-way loudspeaker performance for the widest
variety of portable and installed applications.
At first we thought ZX3 would set the new standard for its class. Since
Electro-Voice is no stranger to industry standards, we were confident
this would be the case. However, once you hear ZX3, we think you’ll
agree… it’s actually in a class of its own.
Featuring the new DVX3121 12-inch woofer, ZX3 continues the
groundbreaking innovation of the Electro-Voice DVX high-performance
woofer design program. No other 12” woofer can touch it. Our ND2
neodymium compression driver completes this no-compromise
approach to maximum sonic performance and reliability.
In addition to the highest performance drivers available, a complete
range of optional accessories, including the CB3 array kit, MB3
wall/ceiling mount bracket, HA-3 handle adapter (for use with the
VSA-1 strong arm mount), and TCA-1 truss clamp adapter, allow
ZX3 to be easily and precisely configured in multiple box arrays,
mounted on truss or tripods, deployed as monitors, or used as
system mains with a subwoofer.

Specifications
Frequency Response (-3dB) 58 - 15000 Hz
Frequency Response (-10dB) 48 - 20000 Hz
Sensitivity 1W/1m 97 dB
System Power Handling (continuous/program/peak) 600/1200/2400 Watts
Low Frequency Power Handling (continuous/program/peak) 500/1000/2000 Watts
High Frequency Power Handling (continuous/program/peak) 40/80/160 Watts
Coverage (hor. x ver.) 90° x 50° or 60° x 60°
LF Transducer DVX3121
HF Transducer ND2
Enclosure Material Polypropylene
Color Black or White
Permanent Outdoor Use PI version (IP55) black or white
Speaker Type Full range
Weight Net 19.8 kg ( 43.65 lbs )
Bosch Communications Systems
Telex Communications, Inc.
12000 Portland Ave South,
Burnsville, MN 55337, USA
USA–Ph: 1-800-392-3497
Fax: [phone]
©2008 Telex Communications, Inc.
PA#20693
SSK-1 CB5
HA3 HDC-3
EBK-3
Housed in a stylish yet rugged injection molded enclosure, ZX3 is
available in a weatherized version and in either black or white finish.
ZX3 is also available with 90° x 50° or 60° x 60° horn dispersion
patterns, 45° or 55° monitor angles, passive or bi-amp operation,
and seven M8 rigging points.
A solution for all your small-format sound reinforcement needs, ZX3
introduces a new era in 12” two-way performance.
Key features:
• Weight:19.8kg(43.7lbs)
• 97dBsensitivity1W@1m
• MaxSPL:131dB
• Continuouspowerhandling(passivemode)600watts
• Continuouspowerhandling(bi-ampmode)LF500watts,
HF 40 watts
• Dimensions:614mmx398mmx363mm
(24.17 in x 15.65 in x 14.3 in)
• NL4ortwoconductorSJOcableandglandnut
(weatherized versions)
• SevenM8riggingpoints,twosinglestudttings