Electrolux ESL 68060 User manual

user manual
bruksanvisning
manual de instrucciones
Dishwasher
Oppvaskmaskin
Lavavajillas
ESL 68060
Downloaded from DishWasher-Manual.com Manuals

Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information 2
Product description 3
Control panel 4
Display 6
First use 6
Set the water softener 6
Use of dishwasher salt 7
Use of rinse aid 8
Daily use 9
Loading cutlery and dishes 10
Use of detergent 14
Multitab function 15
Select and start a washing programme 15
Unloading the dishwasher 16
Washing programmes 16
Care and cleaning 18
What to do if... 19
Technical data 20
Hints for test institutes 21
Installation 22
Water connection 22
Electrical connection 24
Environment concerns 24
Subject to change without notice
Safety information
In the interest of your safety and to en-
sure the correct use, before installing
and first using the appliance, read this
user manual carefully, including its hints
and warnings. To avoid unnecessary
mistakes and accidents, it is important
to ensure that all people using the appli-
ance are thoroughly familiar with its op-
eration and safety features. Save these
instructions and make sure that they re-
main with the appliance if it is moved or
sold, so that everyone using it through
its life will be properly informed on appli-
ance use and safety.
Correct use
• This dishwasher is only intended for wash-
ing household utensils suitable for ma-
chine washing.
• Do not put any solvents in the dishwasher.
This could cause an explosion.
• Knives and other items with sharp points
must be loaded in the cutlery basket with
their points down or placed in a horizontal
position in the upper basket.
• Only use products (detergent, salt and
rinse aid) suitable for dishwashers.
• Avoid opening the door whilst the appli-
ance is in operation, hot steam may es-
cape.
• Do not take any dishes out of the dish-
washer before the end of the washing cy-
cle.
• After use, isolate the appliance from the
power supply and turn off the water sup-
ply.
• This product should be serviced only by an
authorized service engineer, and only gen-
uine spare parts should be used.
• Under no circumstances should you at-
tempt to repair the machine yourself. Re-
pairs carried out by inexperienced persons
could cause injury or serious malfunction-
ing. Contact your local Service Force Cen-
tre. Always insist on genuine spare parts.
General safety
• Persons (including children) with reduced
physical sensory, mental capabilities or
lack of experience and knowledge must
not use the appliance. They must have su-
pervision or instruction for the operation of
the appliance by a person responsible for
their safety.
• Dishwasher detergents can cause chemi-
cal burns to eyes, mouth and throat. Could
endanger life! Comply with the safety in-
structions of the dishwasher detergent
manufacturer.
• Water in the dishwasher is not for drinking
purposes. Detergent residue may still be
present in your machine.
2 electrolux
Downloaded from DishWasher-Manual.com Manuals

• Ensure that the door of the dishwasher is
always closed when it is not being loaded
or unloaded. In this way you will avoid any-
body tripping over the open door and hurt-
ing themselves.
• Do not sit or stand on the open door.
Child safety
• This appliance is designed to be operated
by adults. Children must be supervised to
ensure that they do not play with the ap-
pliance.
• Keep all packaging well away from chil-
dren. There is a risk of suffocation.
• Keep all detergents in a safe place out of
children’s reach.
• Keep children well away from the dish-
washer when the door is open.
Installation
• Check your dishwasher for any transport
damage. Never connect a damaged ma-
chine. If your dishwasher is damaged con-
tact your supplier.
• All packaging must be removed before
use.
• Any electrical and plumbing work required
to install this appliance must be carried out
by a qualified and competent person.
• For safety reasons it is dangerous to alter
the specifications or attempt to modify this
product in any way.
• Never use the dishwasher if the electrical
supply cable and water hoses are dam-
aged; or if the control panel, work top or
plinth area are damaged such that the in-
side of the appliance is freely accessible.
Contact your local Service Force centre, in
order to avoid hazard.
• All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
Warning! For electrical and water
connection carefully follow the
instructions given in the specific
paragraphs.
Product description
1Upper basket
2Water hardness dial
3Salt container
4Detergent dispenser
5Rinse aid dispenser
6Rating plate
7Filters
8Lower spray arm
electrolux 3
Downloaded from DishWasher-Manual.com Manuals

9Upper spray arm
This dishwasher has an internal light that
turns on when the door opens and off
when it closes.
Internal light equipped with led lamp
CLASS 1 in accordance with EN
60825-1: 1994 + A1:2002 + A2:2001.
In case this light has to be replaced
please contact your local Service Force
Centre.
Optical signal
Once the washing programme starts, a
point-shaped optical signal shows on the
floor beneath the appliance door.
If you install the appliance higher up with a
furniture door mounted flush, the optical sig-
nal can no longer be seen.
Optical signal
Red light fixed Indicates the running of a wash-
ing programme. Comes on
when the programme starts.
Goes off once the programme
has ended.
Red light
flashing Indicates a malfunction of the appliance.
Green light
fixed Indicates the end of the wash- ing programme.
Control panel
In this fully integrated appliance the con-
trols are located on the top of the door.
When operating with the controls the
door needs to be open.
1. On/off button
2. Scroll buttons (+ -)
3. Display
4. Ok/start button (OK START)
5. Option button (OPTION)
Messages in the display and audible sig-
nals will help you to operate with the ap-
pliance.
Scroll buttons (+ -)
These two buttons have a double function:
• set a washing programme,
• set options.
Ok/Start button
Is necessary to:
• confirm / memorize any option,
• start a washing programme.
Ok/Start button and option button if
pressed simultaneously can:
• cancel a washing programme in pro-
gress,
• cancel an option.
It is also possible to return to the factory set-
ting for the following options:
LANGUAGE
BRIGHTNESS
In setting mode press for about 6 seconds
these 2 buttons simultaneously; the default
language message will appear in the display.
Option button
Press this button to enter a menu of options;
press again to exit from the menu.
How to set the options
1. Press the option button.
2. Press one of the scroll buttons until the
display shows the required option
– SAVE ENERGY
– DELAY START
–SETTINGS
– MULTITAB
3. Press the Ok/Start button to confirm and
enter submenu.
4. Press one of the scroll buttons until the
display shows the required submenu.
4 electrolux
Downloaded from DishWasher-Manual.com Manuals

5. Press the Ok/Start button to confirm.
6. To exit from menu options press the op-
tion button.
Switching on for the first time - setting
the language
1. Press the on/off button.
2. In the display appears the default lan-
guage message. If you want to confirm
the default language press the Ok/Start
button.
3. If you want to set a different language use
the scroll buttons until the required lan-
guage appears in the display. Press the
Ok/Start button to confirm.
Menu options Submenu
DELAY START Allows the start of the selected washing programme to be de-
layed for between 1 and 19 hours. The countdown will decrease
with steps of 1 hour. Only in the last hour the decrease is in mi-
nutes. Once the countdown has elapsed the washing pro-
gramme will start automatically.
SAVE ENERGY This function decreases the temperature in the drying phase.
Energy saving is between 10% and 25%.
You can set this function with all washing programmes. The re-
lated symbol comes on.
This function has no effect on some programmes. Refer to
'Washing programmes' for more details.
Dishes can be wet at the end of the programme. In this condition
we recommend, to open the dishwasher door and keep it ajar
and let dishes dry naturally.
– ON - function activated. The corresponding symbol shows in
the display.
– OFF - function deactivated.
MULTITAB Sets the dishwasher for the use of combi detergent tablets. Refer
to 'Multitab function'.
– ON - function activated. The multitab symbol shows in the
display.
– OFF - function deactivated.
SETTINGS LANGUAGE - Allows to view messages in the required language.
BRIGHTNESS - allows to increase or decrease the brightness of
the background of the display.
10 different levels can be selected.
Factory setting: level 10.
SOUND VOLUME - allows to adjust the volume of the audible
signals (from 0 to 5).
Level 0 means the deactivation of the audible signals. The cor-
responding symbol shows in the display.
RINSE AID - allows to activate or deactivate the rinse aid dis-
penser, only when multitab function is active.
– ON - activated
– OFF - deactivated
WATER HARDNESS - allows to set electronically the water soft-
ener.
electrolux 5
Downloaded from DishWasher-Manual.com Manuals

Display
1The little bars show the progress of the washing programme.
2Messages show in this part of the display.
3Symbols
Symbols
DELAY START - symbol flashes when countdown is in progress.
MULTITAB - comes on when the function is active.
SAVE ENERGY - comes on when the function is set.
SOUND VOLUME - comes on when the audible signals are deactivated.
First use
Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: '3 in 1', '4 in 1', '5 in
1' etc. set the multitab function. (Re-
fer to 'Multitab function').
Set the water softener
The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.
6 electrolux
Downloaded from DishWasher-Manual.com Manuals

Setting manually
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish-
washer.
3. Turn the water hardness dial to position
1 or 2 (see chart).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
Enter Option menu - SETTINGS - WATER
HARDNESS.
Use the scroll buttons to set the level of the
water softener, according to the hardness of
the water in your area. Refer to the chart.
Water hardness Adjusting the water hardness setting Use of
salt
°dH °TH mmol/l manually electronically
51 - 70 91 - 125 9,1 - 12,5 2level 10 yes
43 - 50 76 - 90 7,6 - 9,0 2level 9 yes
37 - 42 65 - 75 6,5 - 7,5 2level 8 yes
29 - 36 51 - 64 5,1 - 6,4 2level 7 yes
23 - 28 40 - 50 4,0 - 5,0 2level 6 yes
19 - 22 33 - 39 3,3 - 3,9 2level 5 yes
15 - 18 26 - 32 2,6 - 3,2 1level 4 yes
11 - 14 19 - 25 1,9 - 2,5 1level 3 yes
4 - 10 7 - 18 0,7 - 1,8 1level 2 yes
< 4 < 7 < 0,7 1level 1 no
Use of dishwasher salt
Warning!
Only use salt specifically designed for use in
dishwashers. All other types of salt not spe-
cifically designed for use in a dishwasher, es-
pecially table salt, will damage the water soft-
ener. Only fill with salt just before starting one
of the complete washing programmes. This
will prevent any grains of salt or salty water,
which may have been spilt, remaining on the
bottom of the machine for any period of time,
which may cause corrosion.
To fill:
1. Open the door, remove the lower basket
and unscrew the cap of the salt container
by turning it anticlockwise.
2. Pour 1 litre of water into the container
(this is necessary only before filling
with salt for the first time) .
3. Using the funnel provided, pour in the salt
until the container is full.
electrolux 7
Downloaded from DishWasher-Manual.com Manuals

4. Replace the cap making sure that there
is no trace of salt on the screw thread or
on the gasket.
5. Replace the cap tightly turning it clock-
wise until it stops with a click.
Do not worry if water overflows from the
unit when filling with salt, this is quite
normal.
The salt container will require topping up pe-
riodically.
The display shows a message when the salt
container is empty.
This occurs only at the start and at the end
of the washing programme; during the run-
ning of the programme the indication for salt
refilling is not active.
The refilling salt message can remain
visible for a few hours after the salt has
been replenished, assuming the appli-
ance remains switched on. If you are us-
ing salt that takes longer to dissolve then
this can take longer. The operation of the
appliance is not affected.
Use of rinse aid
Warning! Only use branded rinse aid for
dishwashers.
Never fill the rinse aid dispenser with any
other substances (e.g. dishwasher
cleaning agent, liquid detergent). This
would damage the appliance.
Rinse aid ensures thorough rinsing, and
spot and streak free drying.
Rinse aid is automatically added during
the last rinse.
1. Open the container by pressing the re-
lease button (A).
2. Add the rinse aid in the container. The
maximum level for filling is indicated by
"max".
The dispenser holds about 110 ml of rinse
aid, which is sufficient for between 16 and
40 washing cycles, depending upon the
dosage setting.
3. Ensure that the lid is closed after every
refill.
Clean up any rinse aid spilt during filling
with an absorbent cloth to avoid excess
foaming during the next wash.
8 electrolux
Downloaded from DishWasher-Manual.com Manuals

According to the finish and drying results ob-
tained, adjust the dose of rinse aid by means
of the 6 position selector (position 1 minimum
dosage, position 6 maximum dosage).
The dose is factory set in position 4.
Increase the dose if there are drops of water
or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks
on the dishes or a bluish film on glassware or
knife blades.
The rinse aid container will require topping up
periodically.
The display shows a message when the rinse
aid container is empty.
This happens only at the start and at the end
of the washing programme; during the run-
ning of the programme the indication for rinse
aid refilling is not active.
Daily use
• Check if it’s necessary to refill with dish-
washer salt or rinse aid.
• Load cutlery and dishes into the dishwash-
er.
• Fill with dishwasher detergent.
• Select a wash programme suitable for the
cutlery and dishes.
• Start the wash programme.
Helpful hints and tips
Sponges, household cloths and any object
that can absorb water may not be washed in
the dishwasher.
• Before loading the dishes, you should:
– Remove all left over food and debris.
– Soften remnants of burnt food in pans
• When loading the dishes and cutlery,
please note:
– Dishes and cutlery must not impede the
rotation of the spray arms.
– Load hollow items such as cups,
glasses, pans, etc. with the opening
downwards so that water cannot collect
in the container or a deep base.
– Dishes and items of cutlery must not lie
inside one another, or cover each other.
– To avoid damage to glasses, they must
not touch.
– Lay small objects in the cutlery basket.
• Plastic items and pans with non stick coat-
ings have a tendency to retain water
drops; these items will not dry as well as
porcelain and steel items.
• Light items (plastic bowls etc.) must be
loaded in the upper basket and arranged
so they do not move.
electrolux 9
Downloaded from DishWasher-Manual.com Manuals

For washing in the dishwasher the following cutlery and dishes
are not suitable: are of limited suitability:
• Cutlery with wooden, horn, china or mother-of-
pearls handles.
• Plastic items that are not heat resistant.
• Older cutlery with glued parts that are not tem-
perature resistant.
• Bonded cutlery items or dishes.
• Pewter or copper items.
• Lead crystal glass.
• Steel items prone to rusting.
• Wooden platters.
• Items made from synthetics fibres.
• Only wash stoneware in the dishwasher if it is
specially marked as being dishwasher-safe by
the manufacturer.
• Glazed patterns may fade if machine washed
frequently.
• Silver and aluminium parts have a tendency to
discolour during washing: Residues, e.g. egg
white, egg yolk and mustard often cause dis-
colouring and staining on silver. Therefore al-
ways clean left-overs from silver immediately, if
it is not to be washed straight after use.
Loading cutlery and dishes
The lower basket
The lower basket is designed to take sauce-
pan, lids, plates, salad bowls, cutlery etc.
Service dishes and large lids should be ar-
ranged around the edge of the basket, en-
suring that the spray arms can turn freely.
The rows of prongs in the lower basket can
lie flat to allow you to load pots, pans and
bowls.
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard. Long
and/or sharp items of cutlery such as
carving knives must be positioned
horizontally in the upper basket. Take
care when loading or unloading sharp
items such as knives.
Forks and spoons should be placed in the
removable cutlery basket with the handles
facing downwards and the knives with their
handles facing upwards.
10 electrolux
Downloaded from DishWasher-Manual.com Manuals

If the handles protrude from the bottom of the
basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent
them from sticking together.
To make loading of the cutlery basket easier,
lower the cutlery basket handle.
For best results we recommend that you use
the cutlery grids.
If the size and dimensions of the cutlery do
not allow the use of the grids, they can be
easily hidden.
The cutlery basket is in two parts which can
be separated to give greater loading flexibili-
ty. To separate the two parts, slide them hor-
izontally in opposite directions and pull them
apart.
To reassemble, reverse the procedure.
The upper basket
The upper basket is designed for saucers,
salad bowls, cups, glasses, pots and lids.
Arrange items on and underneath the cup
racks so that water can reach all surfaces.
electrolux 11
Downloaded from DishWasher-Manual.com Manuals

Glasses with long stems can be placed up-
side down in the cup racks.
For taller items, the cup racks can be folded
upwards.
The central rows of prongs can be easily low-
ered to improve loading flexibility.
For glasses with long stems (according to the
size and dimensions), set the glass holder to
the left or right position.
The central rows of prongs can be easily low-
ered to improve loading flexibility.
Mini cutlery basket
The upper basket is supplied with a mini cut-
lery basket.
Caution! NEVER PUT KNIVES IN THE
MINI CUTLERY BASKET. THIS WILL
PREVENT DAMAGE TO THE
APPLIANCE.
The mini cutlery basket must only be placed
in the front part of the upper basket, on the
left or on the right side.
12 electrolux
Downloaded from DishWasher-Manual.com Manuals

The dimensions of the cutlery depend on the
position of the upper basket. Refer to the fol-
lowing table.
Cutlery dimensions for mini cutlery basket
Upper basket in higher
position maximum 15 cm
Upper basket in lower
position maximum 20 cm
Soft spikes
Soft spikes impede glassware to move dur-
ing the washing cycle or when the upper
basket is moved.
Refer to the figures for a correct positioning
of the soft spikes. For more loading flexibility,
they can be positioned on the left or right-
hand side of the basket.
Once positioned correctly, press them down
firmly and make sure they do not move.
Caution! BEFORE CLOSING THE
DOOR, MAKE SURE THAT THE SPRAY
ARMS CAN ROTATE FREELY.
Adjusting the height of the upper basket
If washing very large plates you can load
them in the lower basket after moving the
upper basket to the higher position.
Maximum height of the dishes in the lower
basket
With upper basket
raised 31 cm
With upper basket
lowered 27 cm
To move to the higher position proceed
as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the
mechanism is engaged and the basket is
stable.
electrolux 13
Downloaded from DishWasher-Manual.com Manuals

To lower the basket to the original posi-
tion proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then
allow the mechanism to drop back down
slowly, keeping hold of it.
Caution! Never lift or lower the basket
on one side only.
When the basket is in the higher posi-
tion:
• do not load cups on the cup racks,
• make sure that the cup racks are lied
down and not folded upwards.
After loading your machine always
close the door, as an open door can
be a hazard.
Use of detergent
Only use detergents specifically de-
signed for use in dishwashers.
Please observe the manufacturer’s dos-
ing and storage recommendations as
stated on the detergent packaging.
Using no more than the correct amount
of detergent contributes to reducing pol-
lution.
Fill with detergent
1. Open the lid.
2. Fill the detergent dispenser (1) with de-
tergent. The marking indicates the dosing
levels:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent.
1
2
3. All programmes with prewash need an
additional detergent dose (5/10 g) that
must be placed in the prewash detergent
chamber (2).
This detergent will be used during the
prewash phase.
When using detergent tablets; place the
tablet in compartment (1)
14 electrolux
Downloaded from DishWasher-Manual.com Manuals

4. Close the lid and press until it locks in
place.
Detergent tablets from different manu-
facturers dissolve at different rates. For
this reason, some detergent tablets do
not attain their full cleaning power during
short washing programmes. Therefore,
please use long washing programmes
when using detergent tablets, to ensure
the complete removal of detergent re-
siduals.
Multitab function
This appliance is equipped with the multitab
function, that allows the use of combi deter-
gent tablets.
These products are detergents with a com-
bined cleaning, rinsing and salt functions.
They can also contain other different agents
depending on which kind of tablets you
choose ("3 in 1", "4 in 1", "5 in 1" etc.).
Check whether these detergents are suitable
for your water hardness. See the manufac-
turers instructions.
Once this function is selected it will remain
active for all following wash programmes.
The multitab function stops automatically the
flow of rinse aid and salt. The salt and rinse
aid messages are deactivated.
The programme duration can increase if you
use the multitab function.
Activate or deactivate the multitab func-
tion before the start of a washing pro-
gramme. You cannot activate or deacti-
vate the multitab function when the pro-
gramme operates.
If the drying results are not satisfactory
we suggest that you:
1. Fill up the rinse aid dispenser with
rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position
2.
If you decide to revert back to the use of
individual detergents we advise that you:
1. Deactivate the multitab function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness setting to
the highest setting and perform 1
normal washing programme without
loading any dishes.
4. Adjust the water hardness setting
according to the hardness of the wa-
ter in your area.
5. Adjust the rinse aid dosage.
Select and start a washing programme
Important! Set the options before the start
of a washing programme. When a washing
programme operates, no options can be set.
If it is necessary to set an option, cancel the
washing programme.
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate.
2. Check that the water tap is opened.
3. Press the on/off button.
4. Select the washing programme. Refer to
'Washing programmes' chart for details.
5. If required, postpone the start time of the
washing programme.
6. Set, if required, the options.
7. Press the Ok/Start button and close the
door, the washing programme will start
automatically.
If the delay start has been set, the count-
down will start automatically. Once the
electrolux 15
Downloaded from DishWasher-Manual.com Manuals

delay start has elapsed the programme
will start automatically.
The opening of the door will interrupt the
countdown. Close the door; the count-
down will continue from the point at
which it was interrupted.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress
• Open the appliance door, the programme
stops. The display shows the message
PLEASE CLOSE DOOR.
• Close the door, the programme will con-
tinue from the point at which it was inter-
rupted.
Cancel a delay start or a washing
programme in progress
1. Press simultaneously the option and Ok/
Start buttons.
2. The display shows the message CON-
FIRM CANCEL ?.
3. Press the Ok/Start button to confirm.
4. The appliance returns to setting mode
and the display shows the message
CHOOSE PROGRAMME.
• If a delay start is cancelled also the wash-
ing programme is cancelled.
• If a new washing programme is set, check
that there is detergent in the detergent dis-
penser.
End of the washing programme
1. The appliance stops automatically and an
audible signal informs you of the end of
the washing programme.
2. Open the dishwasher door.
The display shows the message PRO-
GRAMME END and PLEASE SWITCH
OFF.
3. Press the on/off button.
Leave the door ajar and wait a few mi-
nutes before removing the dishes. This
way they will be cooler and the drying will
be improved
If the save energy function is set, dishes
can be wet once the programme finish-
ed. We recommend to leave the appli-
ance door ajar so that dishes can dry
naturally.
Unloading the dishwasher
• Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to cool
down before removing from the appliance.
•Emptythelowerbasketfirst and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
• Water may appear on the sides and the
door of the dishwasher as the stainless
steel will eventually become cooler than
the dishes.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the
water tap turned off.
Washing programmes
Washing programmes
Programme Degree of
soil Type of load Programme description Energy save
1)
AUTOMATIC
2)
Any Crockery, cut-
lery, pots and
pans
Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying
Selectable, im-
pact on washing
programme.
16 electrolux
Downloaded from DishWasher-Manual.com Manuals

Programme Degree of
soil Type of load Programme description Energy save
1)
60° QUICK
3)
Normal or
light soil Crockery and cutlery Main wash up to 60°C Final rinse Selectable, no impact on wash-
ing programme.
70° INTEN-
SIVE Heavy soil Crockery, cut- lery, pots and
pans
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
Selectable, im-
pact on washing
programme.
50° ECO
4)
Normal soil Crockery and
cutlery Prewash Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying
Selectable, im-
pact on washing
programme.
45° GLASS Normal or
light soil Delicate crockery and glassware Main wash up to 45°C 1 intermediate rinse
Final rinse
Drying
Selectable, im-
pact on washing
programme.
ONE HOUR Light soil Crockery and
cutlery Main wash up to 55°C 1 intermediate rinse
Final rinse
Selectable, no
impact on wash-
ing programme.
PLATE
WARMER This programme heats dishes before serving or removes dust
from dishes which have not been
used for a long time.
1 hot rinse Selectable, no
impact on wash-
ing programme.
PREWASH Any Partial load (to be
completed later
in the day).
1 cold rinse (to avoid food
scraps from sticking).
This programme does not re-
quire the use of detergent.
Selectable, no
impact on wash-
ing programme.
1) For programmes where option has an impact, the energy save is between 10% and 25%.
2) During the AUTOMATIC washing programme the level of soiling on the dishes is determined by how
cloudy the water is. The programme duration, water and energy consumption levels can vary; this
depends upon whether the appliance is fully or partially loaded and if the dishes are lightly or heavily
soiled. The temperature of the water is automatically adjusted between 45°C and 70°C.
3) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet
the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
4) Test programme for test institutes.
Consumption values
Programme Duration (in minutes)
1)
Energy (in kWh) Water (in litres)
AUTOMATIC -1,1 - 1,7 12 - 23
60° QUICK -0,9 9
70° INTENSIVE -1,8 - 2,0 23 - 25
ECO 50° -1,0 - 1,1 12 - 13
45° GLASS -0,8 - 0,9 14 - 15
ONE HOUR -1,0 - 1,2 11 - 12
PLATE WARMER -0,8 4
PREWASH -0,1 4
1) The digital display shows the programme duration.
electrolux 17
Downloaded from DishWasher-Manual.com Manuals

The consumption values are intended as
a guide and depend on the pressure and
the temperature of the water and also by
the variations of the power supply and
the amount of dishes.
Care and cleaning
Cleaning the filters
The filters must be checked and cleaned
from time to time. Dirty filters will degrade the
washing result.
Warning! Before cleaning the filters
ensure that the machine is switched off.
1. Open the door, remove the lower basket.
2. The dishwasher filter system comprises a
coarse filter ( A), a microfilter ( B) and a
flat filter. Unlock the filter system using the
handle on the microfilter.
3. Turn the handle about 1/4 a turn anti-
clockwise and remove the filter system
4. Take hold of the coarse filter ( A) by the
handle with the hole and remove from the
microfilter ( B).
5. Clean all filters thoroughly under running
water.
6. Remove the flat filter from the base of the
washing compartment and clean both
faces thoroughly.
7. Put the flat filter back in the base of the
washing compartment and ensure that it
fits perfectly.
8. Place the coarse filter ( A) in the microfil-
ter ( B) and press together.
9. Put the filter combination in place and
lock by turning the handle clockwise to
the stop. During this process ensure that
the flat filter does not protrude above the
base of the washing compartment.
NEVER use the dishwasher without
filters. Incorrect repositioning and
fitting of the filters will produce poor
washing results and will result in
damage to the appliance.
NEVER try to remove the spray
arms.
If residues of soil have clogged the holes
in the spray arms, remove the debris
with a cocktail stick.
External cleaning
Clean the external surfaces of the machine
and control panel with a damp soft cloth. If
necessary use only neutral detergents. Never
use abrasive products, scouring pads or sol-
vent (acetone, trichloroethylene etc...).
Internal cleaning
Ensure that the seals around the door, the
detergent and rinse aid dispensers are
cleaned regularly with a damp cloth.
We recommend every 3 months you run the
wash programme for heavy soiled dishes us-
ing detergent but without dishes.
18 electrolux
Downloaded from DishWasher-Manual.com Manuals

Prolonged periods of non-operation
If you are not using the machine for a pro-
longed period of time you are advised to:
1. Unplug the appliance and then turn off
the water.
2. Leave the door ajar to prevent the forma-
tion of any unpleasant smells.
3. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location
where the temperature is below 0°C. If this is
unavoidable, empty the machine, close the
appliance door, disconnect the water inlet
pipe and empty it.
Moving the machine
If you have to move the machine (moving
house etc...):
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge
hoses.
4. Pull the machine out together with the
hoses.
Avoid over tilting the machine during trans-
portation.
What to do if...
The appliance will not start or stops during
operation.
Certain problems can be due to the lack of
simple maintenance or oversights, which can
be solved with the help of the hints described
in the chart, without calling out an engineer.
Switch off the appliance and carry out the
following suggested corrective actions.
Display message and malfunction Possible cause and solution
• the display shows the message OPEN THE TAP
The appliance does not fill with water. • The water tap is blocked or furred with lime- scale.
Clean the water tap.
• The water tap is turned off.
Turn the water tap on.
• The filter (where present) in the water inlet hose
is blocked.
Clean the filter.
• The water inlet hose has not been correctly laid
or it is kinked or squashed.
Check the water inlet hose connection.
• the display shows the message DRAIN
BLOCKED
The appliance does not drain.
• The sink spigot is blocked.
Clean out the sink spigot.
• The water drain hose has not been correctly laid
or it is kinked or squashed.
Check the water drain hose connection.
• the display shows the message SERVICE
CODE
Anti-flood device is activated.
• Close the water tap and contact your local
Service Force Centre.
electrolux 19
Downloaded from DishWasher-Manual.com Manuals

Malfunction Possible cause and solution
The programme does not start • The appliance door has not been properly
closed. The display shows the message
PLEASE CLOSE DOOR.
Close the door.
• The main plug is not plugged in.
Insert the main plug
• The fuse has blown out in the household fuse
box.
Replace the fuse.
• Delay start has been set.
If dishes are to be washed immediately, cancel
the delay start.
Once these checks have been carried out
switch on the appliance.
The programme will continue from the point
at which it was interrupted.
If the message or malfunction reappears
contact your local Service Force Centre.
For other messages not described in the
chart, please contact your local Service
Force Centre.
Contact your local Service Force Centre,
quoting the model (Mod.), product number
(PNC) and serial number (S.N.).
This information can be found on the rating
plate located on the side of the dishwasher
door.
So that you always have these numbers at
hand, we recommend you to make a note of
them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The wash results are not satisfactory
The dishes are not
clean • The wrong programme has been selected. • The dishes are arranged in such a way as to stop water reaching all parts
of a surface. The baskets must not be overloaded.
• The spray arms do not rotate freely due to incorrect arrangement of the
load.
• The filters in the base of the washing compartment are dirty or incorrectly
positioned.
• Too little or no detergent has been used.
• Where there are limescales deposits on the dishes; the salt container is
empty or incorrect level of the water softener has been set.
• The drain hose connection is not correct.
• The salt container cap is not properly closed.
The dishes are wet
and dull • Rinse aid was not used.
• The rinse aid dispenser is empty.
There are streaks,
milky spots or a blu-
ish coating on
glasses and dishes
• Decrease rinse aid dosage.
Water drops have
dried onto glasses
and dishes
• Increase rinse aid dosage.
• The detergent may be the cause. Contact the detergent manufacturer con-
sumer care line.
If after all these checks, the problem persists,
contact your local Service Force Centre.
Technical data
Dimensions Width cm 59,6
20 electrolux
Downloaded from DishWasher-Manual.com Manuals