Electrolux EHI645BB Instruction Manual

Installation & User manualInduction hob
EHI645BB, EHI845BB

2 electrolux.com.au
CONGRATULATIONS
Thank you for purchasing an Electrolux cooktop.
You’ve chosen a product that brings with it decades
of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind.
So whenever you use it, you can be safe in the
knowledge that you’ll get great results every time.
Welcome to Electrolux.
BEFORE USING YOUR APPLIANCE
Check for any damage or marks. If you find the appliance
damaged or marked you must report it within 7 days to
claim for damages under the manufacturers warranty.
Before you use the appliance, we recommend that you
read through the whole user manual which provides the
description of the product and its functions. To avoid
the risks that are always present when you use a gas
appliance, it is important that the product is installed
correctly and that you read the safety instructions carefully
to avoid misuse and hazards.
For future reference, please store this booklet in a
safe place.
This appliance complies with the requirements of
Australian Standard AS 4551 & AS/NZS 60335.2.6.
CONDITIONS OF USE
This appliance is intended to be used in household and
similar applications such as:
• Staff kitchen areas in shops, offices and
other working environments
• Farm houses
• By clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments.
BEFORE YOU CALL
Please ensure you read the instruction manual fully before
you call for service, or a full service fee could be applicable.
Record model and serial number here:
Model number: ____________________________________
Serial number: _____________________________________
CONTENTS
Safety information ____________________________ 3
Product description ___________________________ 5
Operating instructions_________________________ 6
Helpful hints and tips_________________________ 10
Care and cleaning ___________________________ 12
Troubleshooting _____________________________ 12
Installation __________________________________ 14
Technical information_________________________ 15
Environment concerns _______________________ 15
Warranty____________________________________ 17
SYMBOLS
WARNING!
This symbol indicates information concerning your
personal safety.
CAUTION!
This symbol indicates information on how to avoid
damaging the appliance.
IMPORTANT!
This symbol indicates tips and information about
use of the appliance.
ENVIRONMENT!
This symbol indicates tips and information about
economical and ecological use of the appliance.

3
Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included, with reduced
physical sensory, reduced mental functions or lack of
experience and knowledge use the appliance. They
must have supervision or instruction for the operation
of the appliance by a person who is responsible for
their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance
when it operates or when it cools down. Accessible
parts are hot.
• If the appliance has a child safety device, we
recommend that you activate it.
Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with
the appliance.
• Keep the minimum distance from the other appliances
and units.
• Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
• Seal the cut surfaces with a sealant to prevent moisture
causing swelling.
• Protect the bottom of the appliance from steam and
moisture.
• Do not install the appliance adjacent to a door or under
a window. This prevents hot cookware to fall from the
appliance when the door or the window is opened.
• If the appliance is installed above drawers make sure
that the space, between the bottom of the appliance
and the upper drawer, is sufficient for air circulation.
• Make sure that the ventilation space of 5mm, between
the worktop and the front of the below unit, is free. The
warranty does not cover damages caused by the lack
of an adequate ventilation space.
• The bottom of the appliance can get hot. We
recommend to install a non-combustile separation
panel under the appliance to prevent access to the
bottom.
Please read the user manual carefully and store in a handy
place for later reference. Pass the user manual on to
possible new owners of the appliance.
Read the following carefully to avoid damage or injury.
NOTE: You must read these warnings carefully
before installing or using the appliance. If you need
assistance, contact your Customer Care Department.
The manufacturer will not accept liability, should these
instructions or any other safety instructions incorporated in
this book be ignored.
Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included, with reduced
physical sensory, reduced mental functions or lack of
experience and knowledge use the appliance. They
must have supervision or instruction for the operation
of the appliance by a person who is responsible for
their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, we
recommend that you activate it.
Children and vulnerable people safety
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the
appliance.
• Keep the minimum distance from the other appliances
and units.
• Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
• Seal the cut surfaces with a sealant to prevent moisture
causing swelling.
SAFETY INFORMATION

4 electrolux.com.au
Use
WARNING!
Risk of injury, burns or electric shock.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Do not use an external timer or a separate remote-
control system to operate the appliance.
Do not let the appliance stay unattended during
operation.
• Do not operate the appliance with wet hands or when it
has contact with water.
• Do not put cutlery or saucepan lids on the cooking
zones. They can become hot.
• Set the cooking zone to “off” after each use. Do not rely
on the pan detector.
• Do not use the appliance as a work surface or as a
storage surface.
• If there is a crack on the surface, disconnect power
supply to prevent the electrical shock.
• Users with a pacemaker must keep a distance of
minimum 30cm from the induction cooking zones
when the appliance is in operation.
WARNING!
Risk of fire or explosion.
• Fats and oil when heated can release flammable
vapours. Keep flames or heated objects away from fats
and oils when you cook with them.
• The vapours that very hot oil releases can cause
spontaneous combustion.
• Used oil, that can contain food remnants, can
cause fire at a lower temperature than oil used for
the first time.
• Used oil, that can contain food remnants, can cause
fire at a lower temperature than oil used for the first
time.
• Do not put flammable products or items that are wet
with flammable products in, near or on the appliance.
• Do not try to extinguish a fire with water. Disconnect
the appliance and cover the flame with a lid or a fire
blanket.
WARNING!
Risk of damage to the appliance.
• The glass ceramic can be damaged by objects falling
onto it.
• The edge of the glass ceramic can be damaged by
being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or with
damaged bottoms can scratch the glass ceramic if
pushed across the surface.
• Before spillage can become burnt on to the cooking
surface, remove it with a damp cloth.
• To avoid damaging cookware and glass ceramics, do
not allow saucepans or frying pans to boil dry.
• Do not use the cooking zones with empty cookware or
without cookware.
• Do not use the cooking zones with empty cookware or
without cookware.
• Do not let cookware boil dry to prevent damage to
cookware and the ceramic glass.
• Do not cover the parts of the appliance with
aluminium foil.
NOTE: Damage including broken glass or scratches
caused by misuse outlined above is not covered under
warranty.
Care and cleaning
WARNING!
Risk of damage to the appliance.
• Regularly clean the appliance to prevent the
deterioration of the surface material.
• Do not use water spray and steam to clean the
appliance.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
SAFETY INFORMATION

5
PRODUCT DESCRIPTION
EHI845BB EHI645BB
Control panel layout
1Induction cooking zone
2Induction cooking zone
3Induction cooking zone
4Control panel
5Induction cooking zone
1 12 2
3 34 45 5
15
4
2
7
11
12 8
910
Sensor field Function
1To activate and deactivate the appliance
2To lock / unlock the control panel
3Timer indicators of cooking zones To show for which cooking zone you set the time
4The timer display To show the time in minutes
5To activate the Power function
6To activate the Bridge function
7A heat setting display To show the heat setting
8Control bar To set a heat setting
9To increase or decrease the time
10 To set a cooking zone
11 To activate and deactivate the manual mode of the
Hob2Hood function.
12 Sets all operating zones to a keep warm setting
3
6

6 electrolux.com.au
PRODUCT DESCRIPTION
Display Description
The cooking zone is deactivated
The cooking zone operates
The function operates
The automatic heat up function operates
Power function operates
+ digit There is a malfunction
OptiHeat Control (3 step Residual heat indicator) : continue cook / stay warm / residual heat
Lock / The child safety function operates
Not correct cookware or too small or no cookware on the cooking zone
The automatic switch off function operates
Heat setting displays
OptiHeat control (3 step residual heat indicator)
WARNING!
Risk of burns from residual heat!
OptiHeat Control shows the level of the residual heat.
The induction cooking zones make the heat necessary
for cooking directly in the bottom of the cookware. The
glass ceramic is hot from the heat of the cookware.

7
OPERATING INSTRUCTIONS
On and off
Touch for 1 second to activate or deactivate the
appliance.
Automatic switch off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated ( ).
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc).
An acoustic signal sounds after some time and the
appliance deactivates. Remove the object or clean the
control panel.
• The appliance becomes too hot (e.g. when a
saucepan boils dry). Before you use the appliance
again, wait for the cooking zone to cool down.
• You use incorrect cookware. The symbol comes
on and the cooking zone deactivates automatically
after 2 minutes.
• You do not deactivate a cooking zone or change the
heat setting. After some time comes on and the
appliance deactivates. See the table below.
Automatic switch off times
Heat setting
Stops after 6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch the control bar at the heat setting. Change to the
left or the right, if it is necessary. Do not release before you
have a correct heat setting. The display shows the heat
setting.
Bridge function
IMPORTANT!
Use the Bridge Function with the
Infinite Plancha accessory1).
The Bridge Function connects the two left side cooking
zones under the accessory and they operate as one.
First set the heat setting for one of the cooking zones.
To activate the Bridge Function, touch . To set or
change the heat setting, touch one of the control
sensors. To deactivate the Bridge Function, touch .
The cooking zones operate independently.

8 electrolux.com.au
OPERATING INSTRUCTIONS
Automatic heat up
You can get a necessary heat setting in a shorter time
if you activate the Automatic Heat Up function. This
function sets the highest heat setting for some time (see
the graphic), and then decreases to the necessary heat
setting. To start the Automatic Heat Up function for a
cooking zone:
1. Touch ( comes on in the display).
2. Immediately touch the necessary heat setting. After
3 seconds comes on in the display. To stop the
function change the heat setting.
Switching on and off the power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 5 minutes at most. After that the induction cooking
zone automatically switches back to heat setting . To
switch on, touch , comes on. To switch off, touch a
heat setting between and .
Power management
The power management divides the power between two
cooking zones in a pair (see the illustration). The power
function increases the power to the maximum level for one
cooking zone in the pair. The power in the second cooking
zone automatically decreases. The heat setting display for
the reduced zone changes between two levels.
Count down timer
Use the Count Down Timer to set how long the cooking
zone operates for one cooking session. Set the Count
Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the
timer.
• To set the cooking zone: touch again and again until
the indicator of the required cooking zone comes on.
• Starting the Count Down Timer: touch of the timer
to set the time (00 - 99 minutes). When the indicator
of the cooking zone flashes slower, the time counts
down.
• Checking the remaining time: select the cooking zone
with . The indicator of the cooking zone flashes
faster. Display shows the remaining time.
• Changing the Count Down Timer: select the cooking
zone with touch or .
• Stopping the timer: select the cooking zone with .
Touch . The remaining time counts backwards to 00.
The indicator of the cooking zone goes out. To switch
off you can also touch and at the same time.
• When the time elapses, the sound operates and 00
flashes. The cooking zone switches off.
• Stopping the sound: touch .
Count up timer
Use the Count up Timer to monitor how long the cooking
zone operates.
• Selection of the cooking zone (if more than 1 cooking
zone operates): touch again and again until the
indicator of a necessary cooking zone comes on.
• Starting the Count up Timer: touch of the timer
comes on. When the indicator of the cooking zone
flashes slower, the time counts up, display switches
between and time elapsed (minutes).
• Checking the elapsed time: select the cooking zone
with . The indicator of the cooking zone flashes
faster. Display shows the elapsed time.
• Stopping the Count up Timer: select the cooking zone
with and touch or to switch off the timer. The
indicator of the cooking zone goes out.
Minute minder
You can use the timer as a Minute Minder while cooking
zones are not operating. Touch . Touch or of the
timer to select the time. When the time elapses, the sound
operates and 00 flashes.
• Stopping the sound: touch .

9
OPERATING INSTRUCTIONS
Stop+go
The function sets all cooking zones that operate to the
lowest heat setting ( ). When operates, you cannot
change the heat setting.
does not stop the timer function.
• To activate this function touch . comes on.
• To deactivate this function touch . The heat setting
that you set before comes on.
Lock
When the cooking zones operate, you can lock the control
panel, but not . It prevents an accidental change of the
heat setting. First set the heat setting. To start this function
touch . The symbol comes on for 4 seconds. The
Timer stays on. To stop this function touch . The heat
setting that you set before comes on. When you stop the
appliance, you also stop this function.
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device:
• Start the hob with . Do not set the heat settings.
• Touch for 4 seconds. The symbol comes on.
• Stop the hob with .
Switching off the child safety device:
• Start the hob with . Do not set the heat settings.
Touch for 4 seconds. The symbol comes on.
• Stop the hob with .
Overriding the child safety device for one cooking session:
• Start the hob with . The symbol comes on.
• Touch for 4 seconds. Set the heat setting in less
than 10 seconds. You can operate the hob.
• When you stop the hob with , the child safety device
operates again.
Hob²Hood
This is an advanced automatic function which connects
the hob to a special hood. Both the hob and the hood
have an infra — red signal communicator. Speed of the
fan is defined automatically on basis of mode setting and
temperature of the hottest cookware on the hob. You can
also operate the fan from the hob manually.
IMPORTANT!
For most of the hoods the remote system is
originally deactivated. Activate it before you use
the function.For more information refer to hood
user manual.
Operating the function automatically
The default automatic mode from the factory is H5. You can
change the automatic mode by following the instructions
below. When you activate the hob the hood will adjust the
fan speed automatically. Please note the below table is a
guide, the fan speed varies depending on the temperature
measured on the cooking zones of the cooktop which can
be affected by the heat setting(s) selected as well as the size
and volume of what you are cooking.
Automatic modes
Automatic
light Boiling1) Frying2)
Mode H0 Off Off Off
Mode H1 On Off Off
Mode
H23) On Fan speed
1
Fan speed
1
Mode H3 On Off Fan speed
1
Mode H4 On Fan speed
1
Fan speed
1
Mode H5 On Fan speed
1
Fan speed
2
Mode H6 On Fan speed
2
Fan speed
3
1. The hob detects the boiling process and activates fan
speed in accordance with automatic mode.
2. The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3. This mode activates the fan and the light and does not
rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds. The display comes on and
goes off
3. Touch for 3 seconds.
4. Touch a few times until comes on.
5. Touch of the Timer to select an automatic mode.
IMPORTANT!
To operate the hood directly on the hood panel
deactivate the automatic mode of the function.
When you finish cooking and deactivate the hob,
the hood fan may still operate for a certain period
of time. After that time the system deactivates the
fan automatically and prevents you from accidental
activation of the fan for the next 30 seconds.

10 electrolux.com.au
Cookware for induction cooking zones
WARNING!
Use the induction cooking zones with correct
cookware.
Cookware material:
• correct: cast iron, steel, enamelled steel, stainless
steel, the bottom made of multi-layer (with correct
mark from a manufacturer).
• not correct: aluminium, copper, brass, glass,
ceramic, porcelain.
Cookware is correct for an induction hob if:
• some water boils very quickly on a zone set to the
highest heat setting.
• a magnet pulls on to the bottom of the cookware.
IMPORTANT
THE BOTTOM OF THE COOKWARE
Must be as thick and flat as possible.
Use of the cooking zones
IMPORTANT
Put the cookware on the cross which is on the surface
that you cook. Cover the cross fully. The magnetic
part of the bottom of the cookware must be 125mm
minimum. Induction cooking zones adapt to the
dimension of the bottom of the cookware automatically.
You can cook with the large cookware on two cooking
zones at the same time.
The noises during operation
If you can hear:
• crack noise: cookware is made of different materials
(Sandwich construction).
• whistle sound: you use one or more cooking zones
with high power levels and the cookware is made of
different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.
If unfamiliar with induction units please first compare
the operating sounds of a demonstration model at your
retailer before calling service. If a service call is placed and
the sounds are normal you will be charged for the visit.
HELPFUL HINTS AND TIPS
Operating the fan speed manually
You can also operate the function manually. To do
that touch when the hob is active. This deactivates
automatic operation of the function and allows you
to change the fan speed manually. When you press
you raise the fan speed by one. When you reach an
intensive level and press again you will set fan speed
to 0 which deactivates the hood fan. To start the fan
again with fan speed 1 touch .
IMPORTANT!
To activate automatic operation of the function,
deactivate the hob and activate it again.
Activating the light
You can set the hob to activate the light automatically
whenever you activate the hob. To do so set the
automatic mode to H1 – H6.
IMPORTANT!
To The light on the hood deactivates 2 minutes
after deactivating the hob.
OffSound Control (deactivation and activation of
the sounds)
Deactivation of the sounds
Deactivate the appliance.
• Touch for 3 seconds. The displays come on and
goes out. Touch for 3 seconds. comes on, the
sound is on. Touch , comes on, the sound is off.
When this function operates, you can hear the sounds
only when:
• you touch
• the Minute Minder comes down.
• the Count Down Timer comes down.
• you put something on the control panel.
Activation of the sounds
Deactivate the appliance. Touch for 3 seconds. The
displays come on and goes out. Touch for 3 seconds.
comes on, because the sound is off. Touch ,
comes on. The sound is on.
IMPORTANT
INDUCTION COOKING ZONES
For induction cooking zones a strong electro-magnetic
field creates the heat in the cookware very quickly.

11
Energy saving
ENVIRONMENT
HOW TO SAVE ENERGY
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
• Use the residual heat to keep the food warm or
to melt it.
IMPORTANT
THE COOKING ZONE EFFICIENCY
The cooking zone efficiency is related to the diameter
of the cookware. The cookware with a smaller diameter
than the minimum receives only a part of the power
generated by the cooking zone. For the minimum
diameters see the Technical data chapter.
Eco Timer
ENVIRONMENT
To save energy, the heater of the cooking zone
deactivates before the count down timer sounds. The
difference in the operation time depends on the heat
setting level and the length of the cooking operation.
Hints and Tips for Hob²Hood function
When you operate the hob with the function:
• Protect the hood panel from direct sunlight.
• Do not spot halogen light on the hood panel.
• Do not cover the hob panel.
• Do not interrupt the signal between the hob and
the hood (for example with a hand or a cookware
handle). (Hood in the picture is only an example).
HELPFUL HINTS AND TIPS
IMPORTANT!
It may happen that other remote controlled
appliances may block the signal. To avoid it do
not operate the remote of the appliance and the
hob at the same time.
Rangehoods with the Hob²Hood function
To find the full range of rangehoods which work with
this function refer to our consumer website. The
Electrolux rangehoods that work with this function
must have the symbol

12 electrolux.com.au
Heat
setting
Use to: Time Hints Nominal
power
consumption
1
Keep cooked foods warm as required Cover 3%
1-3 Hollandaise sauce, melt: butter,
chocolate, gelatine
5 - 25 min Mix occasionally 3-8%
1-3 Solidify: fluffy omelettes, baked
eggs
10 - 40 min Cook with a lid on 3-8%
3-5 Simmer rice and milk based
dishes, heating up ready-cooked
meals
25 - 50 min Add at least twice as much
liquid as rice, stir milk dishes
part way through
8-13%
5-7 Steam vegetables, fish, meat 20 - 45 min Add some tablespoons of
liquid
13-18%
7-9 Steam potatoes 20 - 60 min Use max. 1⁄4 L water for 750 g
of potatoes
18-25%
7-9 Cook larger quantities of food,
stews and soups
60 - 150 min Up to 3 L liquid plus
ingredients
18-25%
9-12 Gentle fry: escalope, veal cordon
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts
as necessary Turn halfway through 25-45%
12-13 Heavy fry, hash browns, loin
steaks, steaks
5 - 15 min Turn halfway through 45-64%
14 Boil large quantities of water, cook
pasta, sear meat (goulash, pot
roast), deep fry chips
100%
Boil large quantities of water.
Power management is activated.
Examples of cooking applications
The relation between the heat setting and the cooking
zone consumption of power is not linear. When you
increase the heat setting it is not proportional to the
increase of the cooking zone consumption of power.
It means that the cooking zone with the medium heat
setting uses less than a half of its power.
IMPORTANT
The data in the table is for guidance only.
Information on acrylamides
Important! According to the newest scientific knowledge,
if you brown food (especially food that contains starch),
acrylamides can pose a health risk. Thus, we recommend
that you cook at the lowest temperatures and do not brown
food too much.
The Power function is suitable for heating large quantities of water.

13
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
IMPORTANT
Scratches or dark stains on the glass ceramic have no
effect on how the appliance operates.
To remove the dirt
1. Remove immediately: melted plastic, plastic foil, and
food with sugar. If not, the dirt can cause damage to
the appliance. Use a special scraper for the glass. Put
the scraper on the glass surface at an acute angle and
move the blade on the surface.
Remove after the appliance is sufficiently cool:
limescale rings, water rings, fat, stains, shiny metallic
discolourations. Use a special cleaning agent for glass
ceramic or stainless steel.
2. Clean the appliance with a moist cloth and some
detergent.
3. At the end rub the appliance dry with a clean cloth.
TROUBLESHOOTING
Problem Possible cause Remedy
Red rings, limescale or water
rings, shiny metallic or other
discolouration, scratches/
shadows, bubbles or other
miscellaneous marks or stains on
ceramic glass cooktop surface.
Cooktop surface has not been cleaned
correctly. Cleaning/ maintenance of the
cooktop surface is not covered under
warranty. If a service call is placed to
clean the cooktop you will be charged for
the visit.
Use a ceramic glass cleaner such
as Cerapol.
Pitting of ceramic glass surface. Spillovers of liquid with high sugar
content.
These types of spills must be removed
immediately with a special scraper for the
glass. If not permanent damage to the
cooktop glass can occur which is not
covered under warranty.
You cannot activate the
appliance or operate it.
• You touched 2 or more sensor fields at
the same time.
• The Stop+Go function operates.
• There is water or fat stains on the
control panel.
Activate the appliance again and set the
heat setting in less than 10 seconds.
Touch only one sensor field.
Refer to the chapter “Operating instructions”
Clean the control panel.
An acoustic signal sounds and
the appliance deactivates. An
acoustic signal sounds when
the appliance is deactivated.
You put something on one or more
sensor fields.
Remove the object from the sensor fields.
The appliance deactivates. You put something on the sensor field. Remove the object from the sensor field.
The residual heat indicator does
not come on.
The cooking zone is not hot because it
operated only for a short time.
If the cooking zone operated sufficiently
long to be hot, speak to the service centre.
The Automatic Heat Up function
does not operate.
The cooking zone is hot.
The highest heat setting is set.
Let the cooking zone become sufficiently cool.
The highest heat setting has the same power
as the Automatic Heat Up function.
The heat setting changes
between two levels.
The Power management is activated. Refer to “Power management”.
Hob2Hood function does
not work
Object interrupting signal between hob
and the hood, or object covering the
control panel
Move items obstructing signal or covering
control panel

14 electrolux.com.au
TROUBLESHOOTING
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the customer service
centre. Give the data from the rating plate and an error
message that comes on.
Make sure you operated the appliance correctly. If not the
servicing by a customer service technician or dealer will
not be free of charge, also during the warranty period. The
instructions about the customer service and conditions of
guarantee are in the guarantee booklet.
The sensor fields
become hot.
The cookware is too large or you put it
too near to the controls.
Put large cookware on the rear cooking zones
if necessary.
There is no signal
when you touch the
panel sensor fields.
The signals are deactivated. Activate the signals
(refer to “OffSound control”).
comes on The automatic switch-off operates. Deactivate the appliance and activate it again.
comes on The Child Safety Device or the Lock
function operates.
Refer to the chapter “Operating instructions”.
comes on • No cookware on the cooking zone.
• Incorrect cookware.
• The diameter of the bottom of the
cookware is too small for the cooking
zone.
• The cookware do not cover the cross.
Put cookware on the cooking zone.
Use the correct cookware.
Use larger diameter cookware.
Cover the cross fully.
and number
comes on
There is an error in the appliance. Disconnect the appliance from the electrical
supply for some time. Disconnect the fuse
from the electrical system of the house.
Connect it again. If comes on again, speak
to the after sales service.
comes on There is an error in the appliance,
because either the cookware boils dry
or you’ve used incorrect cookware.
Overheating protection for cooking zone
operates. The automatic switch-off
operates.
Deactivate the appliance. Remove the hot
cookware. After approximately 30 seconds,
activate the cooking zone again. If the
cookware was the problem, the error message
goes out of the display, but the residual heat
indicator can stay. Let the cookware become
sufficiently cool and refer to “Cookware for
the induction cooking zone” to see if your
cookware is compatible with the appliance.

15
WARNING!
Refer to “Safety information” chapter.
IMPORTANT
BEFORE INSTALLATION
Before the installation of the appliance, record the
information below from the rating plate. The rating plate is
on the bottom of the appliance casing.
Model
PNC
Serial number
==
==
Built-in appliances
Only use the built-in appliances after you assemble the
appliance into correct built-in units and work surfaces that
align to the standards.
Connection cable
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single phase or two phase
connection.
min.
25mm
min.
5mm
min.
20mm
R 5mm
R 5mm
EHI845BB
EHI645BB
600mm
600mm
490+1mm
490+1mm
750+1mm
560+1mm
min.
500mm
min.
5mm
min.
50mm
IMPORTANT
If you use a protection box (an additional accessory1), the
front airflow space of 5mm and protective floor directly
below the appliance are not necessary.
You can not use the protection box if you install the
appliance above an oven.
INSTALLATION

16 electrolux.com.au
Model.
Typ 58 GBD C3 AU
Induction 7.4 kW
Ser.Nr.
ELECTROLUX
Cooking
zone
Nominal Power
(Max heat setting) (W)
Power Function
activated (W)
Power function
maximum duration (min)
Minimum
cookware
diameter (mm)
Right rear 2300 W 3200 W 10 125
Right front 2300 W 3200 W 10 125
Left rear 2300 W 3200 W 10 125
Left front 2300 W 3200 W 10 125
The power of the cooking zones can be different in some
small ranges from the data in the table. It changes with
the material and dimensions of the cookware.
ENVIRONMENT
ENVIRONMENT CONCERNS
Recycle the materials with the symbol .
Put the packaging in applicable containers to recycle it.
Help protect the environment and human health and to
recycle waste of electrical and electronic appliances. Do
not dispose appliances marked with the symbol with
the household waste. Return the product to your local
recycling facility or contact your municipal office.
TECHNICAL INFORMATION

17
NOTES

18 electrolux.com.au
NOTES

19
This document sets out the terms and conditions of the product
warranties for Electrolux Appliances. It is an important document.
Please keep it with your proof of purchase documents in a safe place
for future reference should you require service for your Appliance.
1. In this warranty:
(a) ‘acceptable quality’ as referred to in clause 10 of this warranty has
the same meaning referred to in the ACL;
(b) ‘ACL’ means Schedule 2 to the Competition and Consumer Act 2010;
(c) ‘Appliance’ means any Electrolux product purchased by you and
accompanied by this document;
(d) ‘ASC’ means Electrolux authorised service centres;
(e) ‘Electrolux’ means Electrolux Home Products Pty Ltd of 163
O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in
respect of Appliances purchased in Australia and Electrolux (NZ)
Limited (collectively ‘Electrolux’) of 3-5 Niall Burgess Road, Mount
Wellington, in respect of Appliances purchased in New Zealand;
(f) ‘major failure’ as referred to in clause 10 of this warranty has the
same meaning referred to in the ACL and includes a situation when
an Appliance cannot be repaired or it is uneconomic for Electrolux, at
its discretion, to repair an Appliance during the Warranty Period;
(g) ‘Warranty Period’ means the Appliance is warranted against
manufacturing defects in Australia for 24 months and in New Zealand
for 24 months, following the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not having purchased
the Appliance for re-sale, and ‘your’ has a corresponding meaning.
2. This warranty only applies to Appliances purchased and used in Australia
or New Zealand and used in normal domestic applications and is in
addition to (and does not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia or New Zealand.
3. During the Warranty Period Electrolux or its ASC will, at no extra charge
if your Appliance is readily accessible for service, without special
equipment and subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Electrolux or its ASC may
use remanufactured parts to repair your Appliance. You agree that
any replaced Appliances or parts become the property of Electrolux.
This warranty does not apply to light globes, batteries, lters or similar
perishable parts.
4. Parts and Appliances not supplied by Electrolux are not covered by
this warranty.
5. To the extent permitted by law, you will bear the cost of transportation,
travel and delivery of the Appliance to and from Electrolux or its ASC. If
you reside outside of the service area, you will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and from Electrolux or
its ASC.
In all instances, unless the Appliance is transported by Electrolux or an
Electrolux authorised representative, the Appliance is transported at the
owner’s cost and risk while in transit to and from Electrolux or its ASC.
6. Proof of purchase is required before you can make a claim under
this warranty.
7. You may not make a claim under this warranty unless the defect claimed
is due to faulty or defective parts or workmanship. Electrolux is not liable
in the following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions supplied with
the Appliance;
(b) the Appliance is modied without authority from Electrolux in writing;
(c) the Appliance’s serial number or warranty seal has been removed
or defaced;
(d) the Appliance was serviced or repaired by anyone other than
Electrolux, an authorised repairer or ASC.
8. This warranty, the contract to which it relates and the relationship
between you and Electrolux are governed by the law applicable where
the Appliance was purchased. Where the Appliance was purchased in
New Zealand for commercial purposes the Consumer Guarantee Act
does not apply.
9. To the extent permitted by law and subject to your non-excludable
statutory rights and warranties, Electrolux excludes all warranties and
liabilities (other than as contained in this document) including liability for
any loss or damage whether direct or indirect arising from your purchase,
use or non use of the Appliance.
10. For Appliances and services provided by Electrolux in Australia,
the Appliances come with a guarantee by Electrolux that cannot be
excluded under the ACL. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the Appliance
repaired or replaced if the Appliance fails to be of acceptable quality and
the failure does not amount to a major failure.
The benets to you given by this warranty are in addition to your other
rights and remedies under a law in relation to the Appliances or services
to which the warranty relates.
11. At all times during the Warranty Period, Electrolux shall, at its discretion,
determine whether repair, replacement or refund will apply if an
Appliance has a valid warranty claim applicable to it.
12. For Appliances and services provided by Electrolux in New Zealand,
the Appliances come with a guarantee by Electrolux pursuant to the
provisions of the Consumer Guarantees Act, the Sale of Goods Act and
the Fair Trading Act.
13. To enquire about claiming under this warranty, please follow these steps:
(a) carefully check the operating instructions, user manual and the terms
of this warranty;
(b) have the model and serial number of the Appliance available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
14. You accept that if you make a warranty claim, Electrolux and its ASC
may exchange information in relation to you to enable Electrolux to meet
its obligations under this warranty.
Warranty
FOR SALES IN AUSTRALIA AND NEW ZEALAND
APPLIANCE: BUILT-IN OVEN, COOKTOP
AND FREESTANDING COOKERS
Important Notice
Before calling for service, please ensure that the steps listed in clause 13 above have been followed.
FOR SERVICE
or to nd the address of your nearest
state service centre in Australia
PLEASE CALL 13 13 49
For the cost of a local call (Australia only)
SERVICE AUSTRALIA
ELECTROLUX HOME PRODUCTS
electrolux.com.au
FOR SPARE PARTS
or to nd the address of your nearest
state spare parts centre in Australia
PLEASE CALL 13 13 50
For the cost of a local call (Australia only)
FOR SERVICE
or to nd the address of your nearest
authorised service centre in New Zealand
FREE CALL 0800 10 66 10
(New Zealand only)
SERVICE NEW ZEALAND
ELECTROLUX (NZ) Limited
electrolux.co.nz
FOR SPARE PARTS
or to nd the address of your nearest
state spare parts centre in New Zealand
FREE CALL 0800 10 66 20
(New Zealand only)
GOV_Warr_Sep15

shop.electrolux.com.au
Electrolux Home Products Australia
telephone: [phone]
fax: [phone]
email: [e-mail]
web: electrolux.com.au
Electrolux Home Products New Zealand
telephone: [phone]
fax: [phone]
email: [e-mail]
web: electrolux.co.nz
To add a touch of
professional inspiration
to your home, visit
electrolux.com.au
or electrolux.co.nz
electrolux.com.au
or electrolux.co.nz
P/No. ANC A05797901
© 2016 Electrolux Home Products Pty Ltd.
EMAN_IND_Mar16