Electrolux Dometic RH 436D User manual

MANUAL
RH 436D
RH 447D
RH 430LD
RH 440LD
RH 441LD
RH 455LD
RH 456LD
RH 460LD
RH 461LD
RH 456LDE
Type H20 / 60
821 2693 - 81
T.D. 07/02
English
miniBar

2
1.0 INTRODU TION 3
2.0 FOR YOUR SAFETY 3
2.1 Warnings and Safety Advice 3
2.2 Coolants 3
3.0 WARRANTY AND 3
USTOMER SERVI E
4.0 INSTALLATION 4
4.1 The Purpose of this Manual 4
4.2 Tools Materials Required 4
4.3 Unpacking 4
4.4 Cleaning 4
4.5 Installation 5
4.6 Securing 6
4.7 Connecting the Device to the 7
Electricity Supply
4.8 Changing the Sliding Hinge 8
4.9 Changing the Doorhang 9
5.0 INSTRU TION FOR USE 10
5.1 Initial Operation 10
5.2 Temperature Control 10
5.3 Automatic Defrost Function 10
5.4 Ice-Making 10
5.5 Automatic Door Control (ADC) 11
5.6 Interior Light 12
5.7 Environmental Advice 13
5.8 Disposal 13
5.9 Energy Saving Tips 13
5.10 Declaration 13
5.11 Check List 14
5.12 Technical Data 15
TABLE OF CONTENTS

INTRODUCTION
You have made an excellent cho ce by choos ng the Dometic miniBar.
We are conv nced that you w ll be sat sf ed w th your new appl ance n every way.
S lent n operat on, the m n Bar fulf ls h gh qual ty standards and guarantees
an eff c ent use of resources and energy dur ng ts ent re work ng l fe, .e.
dur ng manufactur ng, use and d sposal.
Please study the nstallat on and operat ng nstruct ons carefully before
attempt ng to operate the m n Bar.
FOR YOUR SAFETY
Warnings and Safety Advice
In the interests of children's safety:
When d spos ng of the refr gerator, remove all doors and leave the
shelves ns de. Th s prevents ch ldren from be ng acc dentally trapped or
suffocated n the refr gerator.
Never open the cool ng un t - t s under h gh pressure.
Never store explos ve substances, such as l ghter fuel, petrol, ether or
s m lar products n the m n Bar.
The m n bar s not su table for the proper storage of med cat ons.
The m n Bar must be nstalled n such a way that acc dental contact w th
the cool ng un t (wh ch heats up when n use) s mposs ble.
The appl ance has to be connected to a properly earthed socket n l ne
w th the relevant val d country regulat ons.
Serv c ng must only be carr ed out by author sed serv ce personnel.
oolants
Ammon a s used as a coolant.
Th s s a natural compound also used n household clean ng agents (1 l tre of
Salm ak cleaner conta ns up to 200g of ammon a - about tw ce as much as s
used n the refr gerator). Sod um chromate s used for corros on protect on
(less than 2% of the coolant).
If a leak occurs (wh ch can be eas ly detected due to the unpleasant smell):
Sw tch the dev ce off (pull ma ns plug, f appl cable);
Vent late room thoroughly.
Inform hotel personnel.
For the safety of hotel guests and personnel, t has been establ shed by
nspectors that the coolant poses no threat to health.
WARRANTY AND CUSTOMER SERVICE
Warranty arrangements are n accordance w th EC D rect ve 44/1999/CE and the
normal cond t ons appl cable for the country concerned.
For warranty or other serv c ng, please contact our Domet c Serv ce department.
Any damage due to mproper use s not covered by the warranty. The warranty
does not cover any mod f cat ons to the appl ance or the use of non-or g nal
Domet c parts; the warranty does not apply f the nstallat on and operat ng
nstruct ons are not adhered to and no l ab l ty shall be enterta ned. Parts can be
ordered throughout Europe from our Domet c Serv ce department.
When contact ng customer serv ce, please always state model, product,
MLC-Code and ser al number! You can f nd th s nformat on on the model
label ns de the dev ce.
3
1.0
2.0
2.1
3.0
2.2
e.g.

INSTALLATION
The Purpose of this Manual
The manual shows you how to:
nstall the m n Bar correctly.
operate the m n Bar correctly.
guarantee the m n Bar´s correct ma ntenance and funct on ng.
deal w th faults by yourself.
Tools / Materials Required
You w ll need the follow ng tools for n t al operat on:
Unpacking
Check dur ng unpack ng that the dev ce s defect-free.
Report transport damage to the transport company w th n 48 hours.
Check that the voltage noted on the model label corresponds to the
ma ns voltage.
Depending on the model, the following parts can be found in the
miniBar :
leaning
Before operat ng the m n Bar, we recommend you clean t both ns de and
outs de.
Use a soft cloth, lukewarm water and a m ld detergent.
Follow ng th s, wash out the m n Bar us ng clean water and dry
thoroughly.
At annual ntervals, remove dust from fr dge aggregate us ng a brush or
soft cloth.
WARNING:
To prevent mater al damage:
Do not use soap or detergents wh ch are harsh, coarse or
wh ch conta n soda.
Keep the door seal free from o l and grease.
The cyl nder locks have been lubr cated n the factory to be long-last ng.
4
4.1
4.2
4.4
4.0
4.3
m ld detergent
2x

Installation
5
4.5
1. The refrigerator must be level both directions
2. There sould be 20mm clearance to the wall
3. Ventilation must be provided as shown in
alternatives A,B, or D
4. The ventilation duct must at least measure
105mm x the wtdth of the refrigerator
5. Only the entire cooling unit must project into
the duct as shown
6 Air passing through the duct must not be
preheated by any source of heat
7. Ventilation grills, if used, must have openings
of at least 200cm² each
Please follow the installation details below
carefully. Guarantee is valid for products
installed as described only.
IMPORTANT:

6
Securing
RH456LD/E
RH436D, RH447D, RH430LD, RH440LD, RH441LD,
RH460LD, RH461LD
The m n Bar must be screwed onto the cupboard us ng the lower h nges.
4.6
1. T ghten screw. 2. Put on cap.
1. T ghten screw. 2. Put on cap.
4.6.1
4.6.2

onnecting the Device to the Electricity Supply
The dev ce must be connected to a properly earthed socket n l ne w th
the relevant val d country regulat ons.
Check pr or to n t al operat on that the voltage
noted on the model label corresponds to the
ma ns voltage.
If th s s not the case, do not connect the
dev ce and contact your dealer!
If the connect on cable s damaged t must be replaced by the
Customer Serv ce at Domet c, or by respect vely qual f ed personnel,
n order to prevent any hazards.
Attention: For GB Only !
Plug connection (for United Kingdom only)
If a 3-p n plug s used, t should be f tted w th a 3 amp fuse,
w th other plug types, the c rcu t should conta n a 5 amp fuse.
Warning - This appliance must be earthed.
IMPORTANT
The w res n the ma ns lead of th s appl ance
are coloured n accordance w th the follow ng
code:
GREEN and YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the w res n the ma ns lead
may not correspond w th the coloured mark ngs
dent fy ng the term nals n your plug, proceed as
follows.
1. Connect the GREEN and YELLOW coloured w re to the plug term nal
marked letter Eor earth symbol or coloured green or green and yellow.
2. Connect the BROWN coloured w re to the plug term nal marked letter L
or coloured red.
3. Connect the BLUE coloured w re to the plug term nal marked letter Nor
coloured black.
Moulded-On Plug Version
The ma ns lead s f tted w th a non-rew rable moulded-on plug con-
ta n ng a 3 amp fuse. If the fuse requ res replac ng at any t me, the fuse
cover/carr er should be removed us ng a small screwdr ver to level out. The
old fuse should be replaced by a 3 amp ASTA approved BS1362 fuse and
the fuse cover/carr er must be ref tted before the plug s used aga n.
If the fuse cover-carr er s lost, a replaceement can be obta ned from the
Domet c serv ce Shops.
The fuse cover/carr er must be of the same colour as that of the coloured
nsert n the base of the plug. In no c rcumstances must the plug be used
w thout a correct fuse cover/carr er f tted. .....
4.7
7
4.7.1

If the plug suppl ed on the ma ns lead s not su table for the socket n your
home, t should be cut off and d sposed of safely, or destroyed, to avo d any
poss ble shock hazard result ng from the plug be ng nserted nto a 13 amp
socket elswhere n the use. A su table replacement plug should then be
f tted as g ven above.
hanging the Sliding Hinge
(poss ble w th RH430LD, RH440LD, RH441LD, RH460LD, RH436D, RH447D)
8
4.8
1. 2.
3. 4.
Distance to cupboard door (A)
A
1. When closed, the cupboard door (A)
must not l e aga nst the rest of the
surround ng cupboard area
(d stance 1-2mm).
2. There must be a d stance of 6-8mm
between the cupboard door and the
m n Bar.
1.
2.
1. 2.
mm
mm

9
hanging the Doorhang
( RH436D, RH447D, RH430LD, RH440LD,
RH441LD, RH460LD, RH461LD)
1.
2.
3.
4. 5. 6. 7.
8. 9. 10. 11.
R
12. 13.
RL
L
4.9
1. 2.
1.
2.

10
5.1
5.3
5.4
max.
5.0
5.2
min.
Initial Operation
The dev ce must be plugged nto a properly
earthed socket.
The m n Bar ach eves ts operat ng
temperature after several hours.
INSTRUCTION FOR USE
Temperature ontrol
The m n Bar s f tted w th an electron c
temperature control. The thermostat control
button s s tuated n the nternal conta ners
rear area. (RH455LD, RH456LD/E: the
thermostat button s s tuated n the
unrefr gerated compartment).
Automatic Defrost Function
The f rst defrost ng phase commences 39 hours after the n t al operat on
(5.1) and lasts for two hours.
After th s, the dev ce operates for 22 hours at a t me, followed by a
defrost ng per od of 2 hours .
The ce layer must never be removed us ng force, nor
must the defrost ng process ever be accelerated us ng a
heater.
The miniBar operates silently !
S
TT
TTTT
S
Ice-Making
1. 2. 3. 4.
max.
A
B
Mak ng the ce takes approx mately 2-4 hours at an average amb ent
temperature of 25°C.
For F gure 3: In all m n Bars, the ce tray (A) must be put on the left hand
s de of the vapor ser plate (B). An except on s model RH456LD. In th s
model, the ce tray must be placed on the r ght hand s de of the vapor ser
plate.
only use drinking water!

Automatic Door ontrol (AD )
The follow ng descr pt ons only apply to dev ces w th ADC.
1. Open the m n Bar, check ts contents and - f appl cable- stock t up
aga n.
2. Close the m n Bar.
4. Remove ADC key.
Automatic Door ontrol (electrical)
When the m n Bar s opened, a magnet cally operated approx mat on sw tch
located underneath on the fr dge s act vated (FIG 1.)
Depend ng on the connect on (open ng/clos ng mechan sm), an electr c
c rcu t s closed or opened. Accord ngly, th s s reg stered and processed at
the hotel recept on. Note: Electr cal rat ng!
The m n Bar´s w r ng connect on s
s tuated at the rear of the appl ance and
cons sts of a 3-p n term nal str p (1).
11
5.5
1.
The red dot has d sappeared now.
Us ng a red dot n the d splay w ndow (A, po nt 3), the ADC shows that
the m n Bar´s door has been opened.
1.
2.
RH456LD/E All other models
A
A
2.
3. Insert ADC key and turn to the
r ght.
3. Insert ADC key and turn to the
left.
5.5.1
1= term nal str p
2= approx mat on sw tch
A= blue (open ng mechan sm)
B= black (clos ng mechan sm)
C= wh te
FIG.1

12
Interior Light
RH456LD /E
Model RH456LD/E s f tted w th low voltage l ght ng.
When the door s opened, the l ght n the cool ng shelf s sw tched on
v a a sensor.
The l ght n the uncooled storage shelf s sw tched on manually by
means of a sw tch ntegrated nto the lamp.
hanging bulbs:
Interior Light
(All other models)
When the door s opened, the l ght n the cool ng shelf s sw tched on
v a a sensor.
hanging bulbs:
5.6.2
To obtain spare bulbs, please contact
your Dometic Service Centre.
1. Pull out the
ma ns plug.
2. Remove the
reflector d sk.
3. Remove the
defect ve bulb.
4. Insert new bulb. 5.Cl p reflector d sk back n.
5.6
5.6.1
1. Pull out the
ma ns plug.
2. Remove the
reflector d sk.
3. Remove defect ve
bulb.
4. Insert new bulb. 5. Cl p reflector d sk
back n.
90°
1.
2.

Environmental Advice
m n Bars manufactured by Domet c GmbH are free from
CFCs and fluor nated hydrocarbons.
The cool ng un t uses ammon a as the coolant (a natural compound of
hydrogen and n trogen). Cyclopentane, wh ch does not damage the ozone
layer, s used as propellant for the nsulat on made from PU-foam.
Disposal
In order to ensure the re-use of recyclable packag ng mater als, these must
be d sposed of us ng local collect on systems. The dev ce tself must be
handed over to a d sposal company or local counc l wh ch w ll guarantee
the correct use of recyclable mater als and the proper d sposal of the rest.
Energy Saving Tips
At an average room temperature of approx. 22°C, t s suff c ent to
operate the m n Bar w th an average thermostat sett ng.
If poss ble, always store pre-cooled goods.
Do not expose the m n Bar to d rect sunl ght and do not place t close
to a source of heat.
An unobstructed a r c rculat on n the fr dge aggregate must be
ensured.
When remov ng goods, only open the m n Bar br efly.
Sw tch on the m n Bar approx. 12 hours pr or to stock ng.
Declaration of conformity
13
5.7
5.8
5.10
5.9

heck List
14
5.11
1. Failure : No cooling (the aggregate at the back of the device is cold).
Poss ble Cause Self Help Author sed Serv ce
a.) The thermostat s set to 0.
b.) The dev ce plug s not
plugged n.
c.) No voltage n socket.
d.) Defect ve electron cs or
sensor feelers.
e.) Defect ve heat ng cartr dge.
f.) The dev ce s n ts defrost ng
phase.
a.) Set temperature control to
m ddle pos t on.
b.) Plug n dev ce plug.
c.) Check bu ld ng fuse.
f.) See operat ng nstruct on
5.3
d.) Install new
electron cs or sensor.
e.) Install new heat ng
cartr dge.
2. Failure : No cooling (the aggregate is warm).
Poss ble Cause Self Help Author sed Serv ce
a.) The dev ce s not level.
b.) The dev ce was only
sw tched on a short wh le ago.
c.) Defect ve cool ng aggregate.
a.) Level the dev ce us ng a
sp r t level.
b.) Sw tch on the dev ce and
let t run for 5-6 hours.
c.) Check whether
repa r s feas ble. If not,
exchange dev ce.
3. Failure : Poor ooling Performance.
Poss ble Cause Self Help Author sed Serv ce
a.) The cool ng aggregate s not
suff c ently vent lated.
b.) The dev ce s exposed to
d rect sunl ght.
c.) The fr dge door does not
close t ghtly.
d.) L ght permanently on when
door closed.
e.) The fr dge was stocked a
short wh le ago.
a.) Check that the vent lat on
gr ds are not covered. Check
that dev ce has been nstalled
properly ( nstallat on nstruct on
4.5).
b.) Follow nstallat on
nstruct on 4.5.
c.) Check nstallat on n l ne
4.5.
e.) Check fr dge after 5-6
hours for proper cool ng
funct on.
c.) Is door magnet
there? Install new door,
f requ red.
d.) Replace l ght ng
sensor. Install new door,
f requ red.
4. Failure : Frost formation in fridge.
Poss ble Cause Self Help Author sed Serv ce
a.) The fr dge door does not
close t ghtly.
a.) Check nstallat on s n l ne
w th 4.5.
a.) Is door magnet
there?
Install new door.

15
Technical Data
Bu lt- n Bu lt- n Freestand ng / Freestand ng
Bu lt- n
asing Metal Metal Metal Wood
Gross ontentss
(litres) 30 40 40 55
cooled / uncooled 30 / - 40 / - 40 / - 35 / 20
Dimensions (mm)
(H x W xD) 522x384x412 554x401x446 554x401x449 780x420x445
Electrical Rating (W) 65 65 65 65
Power onsumption
kWh / 24h* 0,7 0,8 0,8 0,8
Net Weight (kg) 11 14 15 26
Bu lt- n Freestand ng Freestand ng / Freestand ng /
Bu lt- n Bu lt- n
asing Metal Metal Metal Metal
Gross ontents
(litres) 56 56 60 60
cooled / uncooled 40 / 16 40 / 16 60 / - 60 / -
Dimensions (mm)
(H x W x D) 658x450x503 721x450x505 563x486x474 563x486x474
Electrical Rating (W) 65 65 80 80
Power onsumption
kWh / 24h* 0,9 0,9 1,0 1,45
Net Weight (kg) 21 24,5 20 23
Freestand ng / Freestand ng /
Bu lt- n Bu lt- n
asing Metal Metal
Gross ontents
(litres) 30 40
cooled / uncooled 30 / - 40 / -
Dimensions (mm)
(H x W x D) 522x384x411 554x401x446
Electrical Rating (W) 65 65
Power onsumption
kWh/ 24h* 0,7 0,8
Net Weight (kg) 11 14
* Power consumpt on measured at an average amb ent temperature of 25°C as an average
annual value and at a cool ng compartment temperature of 7°C n l ne w th DIN/EN153.
We reserve the r ght to make techn cal mod f cat ons to our products w thout not ce!
Model RH430LD RH440LD RH441LD RH455LD
Model RH456LDE RH456LD RH460LD RH461LD
Model RH436D RH447D
5.12

Domet c GmbH
In der Ste nw ese 16
D-57074 S egen
Phone: +49-(0) 271 / 692 0
Fax: +49-(0) 271 / 692 300
www.domet c.de/m n bar
www.domet c.com
©Domet c GmbH - 2002 - Subject to change w thout not ce - Pr nted n Germany