Electrolux Icon E23CS78HPS6 User manual

Use Et Care Guide
Side-By-Side Refrigerator
Guia de Uso y Cuidado
Refrigerador de dos puertas
Guide d'utilisation et d'entretien
Rdfrigdrateur _ compartime-nts juxtaposds
Electrolu× iCON ®

Finding Information
Please read and save this guide
Thank you for choosing Electrolux, the new premium brand in home appliances. This Use & Care Guide is part of our
commitment to customer satisfaction and product quality throughout the service life of your new appliance.
We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use
this page to record important product information.
Keep a record for quick reference
Purchase date
Electrolux model number
Electrolux serial number (see picture for location)
Questions?
For toll-free telephone support in the U.S. and Canada: 1-877-4ELECTROLUX (1-877-435-3287)
For online support and Internet production information visit http://www.electroluxicon.com
Tabmeof contents
Findinginformation................................................. 2
PleaseReadAndSaveThisGuide...........................................2
MakeA RecordForQuickReference.......................................2
Questions?..............................................................................2
TableOfContents....................................................................2
Safety.................................................................. 3
Important Safety Instructions .................................................3
Electrical Information ..............................................................4
Installation ............................................................ 5
Location.................................................................................. 5
installing Clearances............................................................... 5
ToLevelthe CabinetUsingthe Front Rollers..........................5
ToLevelthe Doors Usingthe Lower Hinge.............................6
RemovingThe Doors................................................ 7
Getting Through Narrow Spaces............................................8
Connecting The Water Supply ..................................... g
About Your Refrigerator's Water Supply ...............................10
FeatureOverview .................................................. 11
Understanding FeaturesAnd Terms......................................11
Controls & Settings ................................................ 12
Allowing Cooling Time BeforeUse........................................12
Setting CoolingTemperatures...............................................12
System-Monitoring Alarms...................................................13
Turning The Cooling SystemOnAnd Off...............................14
Storage Features................................................... 15
CantileverShelves.................................................................15
Drawers................................................................................15
Doors....................................................................................16
Accessories..........................................................................17
AutomaticIce &Water Dispenser............................... 18
Using TheDispenser.............................................................18
Using TheDispenser Control Panel......................................19
Priming The WaterSupplySystem .......................................20
IceDispenser Operation & Care............................................21
Changing The Filter................................................ 22
Locating TheFilters ..............................................................22
Replacingthe Air Filter..........................................................22
Ordering ReplacementFilters................................................22
ReplacingThe WaterFilter....................................................23
Storing Food &Saving Energy................................... 24
IdeasForStoring Foods........................................................24
IdeasForSaving Energy.......................................................24
NormaJOperating Sounds & Sights............................. 25
Understanding The Sounds You May Hear ...........................25
Care& Cleaning.................................................... 26
Protecting Your Investment ..................................................26
Vacation & Moving Tips........................................................ 27
Care& CleaningTips ............................................................27
Replacing Light Bulbs...........................................................28
Warranty information............................................. 29
Solutions ToCommonProblems ................................ 30
©2007 Electrolux Home Products, Inc. All rights reserved. Printed in the USA

Safety
Important Safety Instructions
Safety Precautions
Do not attempt to install or operate your unit
until you have read the safety precautions in this
manual. Safety items throughout this manual are
labeled with a Danger, Warning or Caution based
on the risk type.
Definitions
This is the safety alert symbol. It is used to
alert you to potential personal injury hazards. Obey
all safety messages that follow this symbol to avoid
possible injury or death.
General Safety
= Do not store or use gasoline, or other
flammable liquids, near this or any other
appliance. Read product labels for warnings
regarding flammability and other hazards.
Do not operate the refrigerator in the
presence of explosive fumes.
Avoid contact with any moving parts of the
automatic ice maker.
Remove all staples from the carton to
avoid cut injuries. Staples can also damage
finishes if they come in contact with other
appliances or furniture.
Child Safety
Packing Materials:
• Packing cartons covered with rugs,
bedspreads, plastic sheets or stretch wrap
may become airtight chambers and can
quickly cause suffocation.
Destroy or recycle the product's carton,
plastic bags, and any other exterior wrapping
material immediately after the refrigerator is
unpacked. Children should never play with
these items.
Child Entrapment And Suffocation
• These problems are not limited to the past.
Whether junked, abandoned or temporarily
stored (even for a few hours), unattended
refrigerators and freezers are dangerous.
Please take the precautions listed below.
Proper Disposal Of Refrigerators/
Freezers
Before you throw away your old refrigerator/freezer:
• Remove the doors.
Leave the shelves in place so children may not
easily climb inside.
Have refrigerant removed by a qualified service
technician.

Safety
Emectrical
The refrigerator must be plugged into its own
dedicated 115 Volt, 60 Hz., AC-only electric
outlet. The power cord of the appliance is
equipped with a three-prong grounding plug
for your protection against electrical shock
hazards. It must be plugged directly into a
properly grounded three-prong receptacle.
The receptacle must be installed in
accordance with local codes and ordinances.
Consult a qualified electrician. Do not use an
extension cord or adapter plug.
If the power cord is damaged, it should
be replaced by the manufacturer, service
technician or a qualified person to prevent
any risk.
Never unplug the refrigerator by pulling on
the power cord. Always grip the plug firmly,
and pull straight out from the receptacle to
prevent damaging the power cord.
Unplug the refrigerator before cleaning
and before replacing a light bulb to avoid
electrical shock.
Performance may be affected if the voltage
varies by 10% or more. Operating the
refrigerator with insufficient power can
damage the compressor. Such damage is not
covered under your warranty.
Do not plug the unit into an outlet controlled
by a wall switch or pull cord to prevent the
refrigerator from being turned off accidentally.
Avoid connecting refrigerator to a Ground
Fault Interrupter (GFI) circuit.

Installation
This Use & Care Guide provides general operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Guide. Before starting the
refrigerator, follow these important first steps.
Location
= Choose a place that is near a grounded
electrical outlet. Do Not use an extension
cord or an adapter plug.
If possible, place the refrigerator out of
direct sunlight and away from the range,
dishwasher or other heat sources.
The refrigerator must be installed on a floor
that is level and strong enough to support a
fully loaded refrigerator.
Consider water supply availability for models
equipped with an automatic ice maker.
Installation
Installation Clearances
= Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides & Top 3/8"
Back 1"
Door Opening
Guidelines for final positioning of your
refrigerator:
All four corners of the cabinet must rest firmly
on the floor.
The cabinet should be level at the front and
rear.
The sides should tilt 1A-inch (6 mm) from front
to back (to ensure that doors close and seal
properly).
Doors should align with each other and be
level.
All of these conditions can be met by
raising or lowering the adjustable front
rollers.
To level the cabinet using the front rollers:
1 Open both doors and remove the toe grille by
gently pulling forward (see illustration),
2 Close the doors and use a flat-blade
screwdriver or 3/8-inch socket wrench to
raise or lower the front rollers,
3 Ensure both doors are bind-free with their
seals touching the cabinet on all four sides.
_!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!
Your refrigerator should be positioned to allow easy
access to a counter when removing food. For best
use of drawers and freezer baskets, the refrigerator
should be in a position where both the refrigerator
and freezer doors can be fully opened.

Installation
NOTE: Level the unit with the adjustable rollers
before leveling the doors.
To level the doors using the adjustable lower
hinge (some models):
1 If the refrigerator door is lower than
the freezer door, raise the refrigerator
door by turning the adjustment screw
counterclockwise using a 7/16inch wrench.
(See illustration.)
2If the freezer door is lower than the
refrigerator door, raise the freezer
door by turning the adjustment screw
counterclockwise using a 7/16inch wrench.
(See illustration.)
RAISE
DOOR
3After leveling, verify door stop contacts lower
hinge and top of door does not contact upper
hinge through full movement of door (from
fully closed to fully open).
ooostop!
ii
Open Door
4 Replace the toe grille by fitting it into
place.

Removing The Doors
Getting Through Narrow Spaces
If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors.
Check first by measuring the entrance.
Required Tools
You will need the following tools:
Tool_ Neces_er¢::
_D _ OR
To prepare for removing the doors:
1 Make sure the electrical power cord is
unplugged from the wall outlet.
2 Open both doors and remove the toe grille
(as explained in the Installation Instructions
that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.
To remove the refrigerator door:
1 Trace lightly around the door's top hinge with
a pencil. This makes reinstallation easier.
To remove the top hinge cover:
1 Remove the three screws from the cover over
the top door hinges.
2 Pull the cover forward about a half-inch and
lift it off.
Hinge Cover
2 Remove the two screws from the top hinge.
Lift the door off of the bottom hinge and set it
aside.
3 Remove the two bottom hinge screws and
hinge if necessary.
To reinstall the refrigerator door, reverse the above
steps. Once both doors are in place, also replace
the top hinge cover.

Removing The Doors
4Remove the plastic closer and pin from the
lower hinge assembly.
To remove the freezer door:
3 Detach the water tube from the connector
located below the freezer door. The
connector releases when you press its outer
sleeve inward.
4 Remove the screws from the top hinge and
pull the multi-wire cable through it. Lift the
door off of the bottom hinge.
1 Detach the multi-wire cable connector
located above the top hinge. Grasp both
sides of the connector firmly and pull apart.
Trace lightly around the hinge with a pencil.
This makes reinstallation easier.
Lay the door on its side to avoid damage to
the water tube extending from the bottom
hinge.
Remove the plastic closer and pin from the
lower hinge assembly.
7 Remove the two bottom hinge screws and
hinge if necessary.
To reinstall the freezer door, reverse the above steps.
Once both doors are in place, ensure they are
aligned with each other and level (Please see To
level the doors using the lower hinge in Installation
section.), then replace the top hinge cover.

Connecting The Water Supply
Before Installing The Water Supply Line, You Will
Need:
Basic Tools: adjustable wrench, flat-blade
screwdriver, and Phillips TM screwdriver
Access to a household cold water line with
water pressure between 30 and 100 psi.
A water supply line made of 1Ainch (6.4mm)
OD, copper or stainless steel tubing. To
determine the length of tubing needed,
measure the distance from the ice maker
inlet valve at the back of the refrigerator to
your cold water pipe. Then add approximately
7 feet (2.1 meters), so the refrigerator can be
moved out for cleaning (as shown).
A shutoff valve to connect the water supply
line to your household water system. DO
NOT use a self-piercing type shutoff valve.
A compression nut and ferrule (sleeve) for
connecting a copper water supply line to the
ice maker inlet valve.
To Connect Water Supply Line To Ice Maker Inlet
Valve
1. Disconnect refrigerator from electric power
source.
2. Place end of water supply line into sink or
bucket. Turn ON water supply and flush
supply line until water is clear. Turn OFF
water supply at shutoff valve.
3. Remove plastic cap from water valve inlet
and discard cap.
4. If you use copper tubing -Slide brass
compression nut, then ferrule (sleeve) onto
water supply line. Push water supply line
into water valve inlet as far as it will go (X
inch/6.4 mm). Slide ferrule (sleeve) into valve
inlet and finger tighten compression nut
onto valve. Tighten another half turn with a
wrench; DO NOT over tighten. See Figure 1.
if you use stainless steel tubing -The nut
and ferrule are already assembled on the
tubing. Slide compression nut onto valve
inlet and finger tighten compression nut
onto valve. Tighten another half turn with a
wrench; DO NOT over tighten. See Figure 2.
5. With steel clamp and screw, secure water
supply line (copper tubing only) to rear panel
of refrigerator as shown.
6. Coil excess water supply line (copper tubing
only), about 2Y2turns, behind refrigerator
as shown and arrange coils so they do not
vibrate or wear against any other surface.
7. Turn ON water supply at shutoff valve and
tighten any connections that leak.
8. Reconnect refrigerator to electrical power
souroe.
,To turn ice maker on, lower wire signal arm
(side mounted) or set the ice maker's On/
Off power switch to the 'T' position (rear
mounted).

Connecting The Water Supply
Figure 1
Figure 2

Feature Overview
Understanding Features And Terms
Your Electrolux refrigerator is designed for optimal convenience and storage flexibility. Use the illustration
below to familiarize yourself with product features and terminology.
Freezer and Refrigerator SpillProofTM CAUTION:
Controls Shelf Do Not Remove
ice Cream Magnet Behind
Water Filter Dairy
Compartment
Door Bin
Ice
Tilt Out
Door
Small
Large
Glide Out
Basket
Tilt
Door Bin
Large
Door
Dairy
Compartment
Door Bin
SpillProof TM
Shelf
Door Bin
Rack
Tall Bottle
Retainer
Door Bin
item
Rack
Meat Keeper
and Cover
Pan
and Cover
Fixed
Door Bin
Toe Grille

Controls & Settings
Allowing Cooling Time Before Use
To ensure reliable food storage, allow your refrigerator and freezer to operate with the doors closed for 8
to 12 hours before placing food inside. During this cooling period, you do not need to adjust the controls,
which are preset at the factory.
Setting Cooling Temperatures
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel
is located at the top of the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current temperatures of your
freezer and fresh food compartments.
To adjust the temperature to a higher or lower setting, press the Up or Down Arrow button closest to the
display. The first time you press the button, the display shows the last setting you entered. Each press of
the button after that increments the setting by one degree.
The display shows your new setting momentarily, then
FREEZER [EMP FR_DGETEMP
DYNASti€ C )01Ht(
changes back to the current temperature.
Choosing Fahrenheit or Centigrade
Depending on which temperature standard you
prefer to use, you can set your control panel to
display in Fahrenheit or Centigrade. To change
between Fahrenheit and Centigrade, press the
Mode button (located between the two digital
temperature displays).
Making Temperature Adjustments
After running your refrigerator for 24 hours, you
can adjust temperatures as needed. Make your
adjustments small and gradual, allowing time for
temperatures to change and stabilize. Refer to the
following guidelines for temperature settings.
TemperatureCentrelRange
Freezer
Fahrenheit Centigrade Fahrenheit
Warmest 60 -,i4_' 47_
Warmer
Fact0ry Setting Midpoint 00 -te_ 37_
Colder
Coldest -60 -21" 330
FreshFeed
Centigrade
80
iQ
TemperatureAdjustment
Adjust FreshFoodcontrol onedegree
If FreshFoodcompartment is too warm colder bypressing Down (Colde r)
button.
If FreshFoodcompartment istoo cold Adjust FreshFoodcontrol onedegree
warmerby pressingthe Up (Cold) button.
It Freezerc0m.-artmentis t00 walm Adjust FreezerC0ntr010nedegreec01der
by pressing Down (Colder) button.
If Freezercompartmentis too cold Adjust Freezercontrol onedegreewarmer
by pressingthe Up (Cold) button.

Controls & Settings
What To Do if The Temperature Displays
Flash
If ever you see both temperature displays
continuously flashing, it may indicate that the control
system has detected a performance problem. Call
your Electrolux service representative, who can
interpret the flashing message.
Turning The Cooling System On And
Off
You can disable the cooling system in your
refrigerator by pressing the On/Off button located
on the left side of the temperature control panel.
To ensure that you do not accidentally turn off the
cooling system, the button does not work unless
you press and hold it for three seconds.
Once you disable the cooling system, all
refrigeration to the freezer and fresh food
compartments stops.
Coohng System On/Off Button
To turn the cooling system back on, you must again press and hold the On/Off button for three more
seconds.
Responding to Alarms (Audible Tones & Indicator Lights)
Your refrigerator's control system can convey the following information through audible tones and the
alarm indicator lights.
Alaim IndicatOr' Audible' Condition' How to Respond
Name. Light Tones
On
On
Door Ajar
(light is off)
Steady
Green
FlashingGreen
FlashingAmber
High Temp
Flashing
Amber
Power
Failure
Alarm system is not active
while Freezer and Fresh Food
compartments are cooling to-
ward the current temperature
settings.
Alarm system is active.
Freezer or Fresh Food door
has been open for over five
minutes.
Freezer or Fresh Food com-
partment has been too warm
(45°F or higher) for over an
hour.
A power outage was detected.
If Freezer and Fresh Food com-
partments do not match your
temperature settings in three
hours, expect the control sys-
tem to signal other conditions.
If cooling down not stabilize
toward your current settings, call
1-877-435-3267 for assistance.
No response required.
Close door to disable and reset
alarm.
Press Alarm Reset button to turn
off alarm. If temperatures do not
improve call 1-877-435-3267 for
assistance.
Press Alarm Reset button to
turn off alarm and again to reset.
Check if the power failure lasted
long enough to affect stored food
temperatures.

Controls & Settings
Using The Alarm Reset Button
You can disable or activate the
alarm system by pressing and
holding the Alarm Reset button
for three seconds. Use it, for
example, to turn off audible
tones and/or flashing indicator
lights.
Once you disable the alarm system, you must
again press and hold the Alarm Reset button for
three more seconds to reset (activate) the alarm
system. The On indicator light remains off while
the Freezer and Fresh Food compartments cool
toward the current temperature settings. When
temperature settings are reached, the On light
displays green to indicate an active alarm system.
Checking the Air Filter Status (some models)
Your refrigerator's fresh food air filter needs to be
replaced from time to time. You can monitor the
need for replacement by pressing and holding the
Air Filter On/Off button for three seconds.
To check the air filter status:
Press the Air Filter On/Off button. This
activates a test cycle, and one of the three
filter status lights displays, indicating one of
the following:
Filter OK -Air filter does not need changing.
Order Filter - Air filter is about 80 percent
used. Please order new one.
Change Filter -Air filter is 100 percent used.
Please change now.
2 Press the Air Filter On/Off button to turn off
the status light.
Electrolu×
Indicator
Lights Air On/
Off Button

Storage Features
Cantimever Shelves
You can easily adjust shelf positions in the freezer
and fresh food compartments to suit your needs.
The shelves have mounting brackets, which attach
to slotted supports at the rear of each compartment.
To change the position of a shelf:
1 Before adjusting a shelf, remove all food.
2 Lift the front edge up.
3 Pull the shelf out.
Replace by inserting the mounting bracket
hooks into the desired support slots.
Lower the shelf and lock into position.
Shelf Features
Your refrigerator includes SpillSafe ®glass shelves,
which are designed to catch and hold accidental
spills. These shelves slide out for easy access to
food and faster cleaning.
Sliding shelves can be pulled forward as far as
their built-in stops al}ow. Sliding shelves cannot be
separated from their mounting brackets.
Your refrigerator includes a variety of storage
drawers. These drawers usually are located in
fixed positions at the bottom of the fresh food
compartment.
Crisper drawers are designed for storing fruits,
vegetables, and other fresh produce. Before storing
items in a crisper:
Wash items in clear water and remove
excess water.
Wrap any items that have strong odors or
high moisture content.
Crisper Humidity Control
Crisper drawers include a sliding control for
adjusting the humidity inside the crisper. This feature
can extend the life of certain fresh vegetables that
keep longer in high humidity.
JJJJJJJJJJJJJJJJJJJJJJJJJJJJJi

Storage Features
Meat Keeper
Some models are equipped with a meat keeper
drawer for short term storage of bulk meat items.
This drawer includes a sliding control for adjusting
the temperature inside.
Any meat to be kept longer than two days should
be frozen. If you store fruits or vegetables in this
drawer, set it to a warmer temperature to prevent
freezing.
Storage Bins
The doors to your freezer and fresh food
compartments use a system of modular storage
bins. All of these bins are removable for easy
cleaning. Some of them have fixed positions, while
others can be adjusted to your needs.
Door bins are ideal for storing jars, bottles, cans,
and large drink containers. They also enable quick
selection of frequently used items.
To change the position of an adjustable
door bin"
1 Before adjusting a bin, remove all food.
2Grip the bin firmly with both hands and lift it
upward.
3 Remove the bin.
4 Place the bin just above desired position.
5Lower the bin onto supports until locked in
place.

Storage Features
Tall Bottle Retainer
The tall bottle retainer keeps tall containers in the
bin from falling forward when opening or closing
the refrigerator door. To install, snap the ends of the
retainer over the edge of the retainer wall as shown
in the illustration.
Can Rack
The can rack allows you to efficiently and securely
store up to six twelve-ounce cans of beverage
drink.
Special Items Rack
The innovative design of the special items rack
allows you to store a six-pack of 12 ounce drink
cans, a bottle of wine, a two-liter soft drink bottle,
or a carton of eggs. To install, slide the special item
rack onto the left side of any shelf as shown in the
illustration.
Dairy Compartment
Use the dairy compartment, at the top of the
fresh food compartment door, for short term
storage of cheese, spreads, or butter. The dairy
compartment, which includes a lift-up cover, is
designed to be warmer than the open storage area
to accommodate these types of food.
Ice Cream Shelf
The ice cream shelf attaches to the top of the ice
dispenser container. It allows storage of both round
and rectangular cartons of your favorite ice cream.

Automatic ice & Water Dispenser
Using The Dispenser
Your automatic ice & water dispenser includes a
control panel, a drinking glass bay, and two push-
paddles for turning on the ice and water supplies.
Using the dispenser control panel is necessary for
the ice dispenser but not the water dispenser. The
control panel also includes options for lighting, filter
monitoring, and increasing the rates of ice making
and freezing.
Dispensing Ice
To operate the ice dispenser, press an option for
crushed or cubed ice on the control panel. Press a
drinking glass against the dispensing paddle (as far
up as possible to catch all the ice). To stop, pull the
glass away from the dispensing paddle.
Dispensing Water
To operate the water dispenser, press a drinking
glass against the dispensing paddle. To stop
dispensing water, pull the glass away from the
dispensing paddle.
The dispensed water is not cold. For colder water,
first add crushed ice or cubes to your drinking
glass.
Drip Tray
A drip tray located at the base of the dispenser bay
catches small spills and allows them to evaporate.
This drip tray is removable for easy cleaning.
[] Electrolux
Cube Crush Light _ut_r E_Df_SS"
St_l_, _ocK Fr_z_ .X_SS
D©©©

Automatic ice & Water Dispenser
Using The Dispenser Control Pane[
Cube Button & Indicator Light
Crush Button & Indicator Light Press button to get crushed ice. Light displays blue. Press glass
against ice dispensing paddle, holding high up to catch all ice.
Light Button & Indicator Light
Filter Status Button & Indica-
tor Light
Lock Button & Indicator Light
Express Freeze Button &
Indicator Light
Express Ice Button & Indica-
tor Light
Light displays in one of three possible colors each time the dispenser
is used to show status of water filter:
Green Water filter does not need changing.
Amber Water filter is about 80 percent used. Please order
new one.
Red Water filter is 100 percent used. Please change as
soon as possible.
After replacing the water filter, reset the filter status by pressing and
holding Filter Status button for 10-15 seconds.
Press and hold button for 3-5 seconds to activate faster rate for freez-
ing food (preserving freshness). Light displays blue. Press and hold
button for 3-5 seconds again to deactivate.

Automatic ice & Water Dispenser
Priming The Water Supply
Your refrigerator's water supply system includes
several tubing lines, an advanced water filter, a
distribution valve bank, and a reserve tank to ensure
ample supply to the ice and water dispenser at all
times. This system needs to be completely filled with
water when first connected to an external supply line.
To prime the water supply system:
=
=
=
Begin filling the tank by pressing and holding
a drinking glass against the water dispenser
paddle.
Keep the glass in this position until water comes
out of the dispenser. There will be noticeable
spurts and sputters as the system pushes air
out through the system and dispenser nozzle. It
may take about 1Y2minutes.
Continue dispensing water for about 3
minutes to flush the system and plumbing
connections of any impurities (stopping to
empty the glass as necessary).
Using The Ice Dispenser After
Installation
Before making ice for the first time, be sure to
prime the water supply system. Air in new plumbing
lines can result in two or three empty ice maker
cycles. Furthermore, if the system is not flushed,
the first ice cubes may be discolored or have an
odd flavor.
Turning The Ice Dispenser On And Off
Ice production is controlled by the ice maker's On/
Off power switch. To gain access to the ice maker,
pull the ice cream tray out. Press the switch to
the "O" position to turn it Off and press to the 'T'
position to turn it On.
Ice Dispenser Operation & Care
The ice maker, ice bin, and dispenser feeding
mechanism are located in the top of the freezer
compartment. After the refrigerator is installed
properly and has cooled for several hours, the
ice maker can produce ice within 24 hours. It can
completely fill an ice bin in about two days.
The ice maker produces 4 to 6 pounds of ice every
24 hours depending on usage conditions. Ice is
produced at a rate of 8 cubes every 75 to 90 minutes.