Electrolux ews 1042 edu User manual

EWS 1042 EDU
EN Washing Machine User Manual

CONTENTS
1. SAFETY INFORMATION...................................................................................... 3
2. SAFETY INSTRUCTIONS.....................................................................................4
3. PRODUCT DESCRIPTION................................................................................... 5
4. CONTROL PANEL............................................................................................... 6
5. PROGRAMMES ..................................................................................................6
6. CONSUMPTION VALUES....................................................................................9
7. OPTIONS...........................................................................................................10
8. SETTINGS......................................................................................................... 10
9. BEFORE FIRST USE..........................................................................................11
10. DAILY USE...................................................................................................... 11
11. HINTS AND TIPS............................................................................................. 14
12. CARE AND CLEANING....................................................................................15
13. TROUBLESHOOTING......................................................................................19
14. TECHNICAL DATA...........................................................................................21
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can be
safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
www.electrolux.com2

1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes
injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
•Do not let children play with the appliance.
•Keep all packaging away from children.
•Keep all detergents away from children.
•Keep children and pets away from the appliance door
when it is open.
•Cleaning and user maintenance shall not be made by
children without supervision.
1.2 General Safety
•Do not change the specification of this appliance.
•Obey the maximum load volume of 4 kg (refer to the
“Programme chart” chapter).
•The operating water pressure (minimum and maximum)
must be between 0,5 bar (0,05 MPa) and 8 bar (0,8
MPa).
•The ventilation openings in the base (if applicable) must
not be obstructed by a carpet.
•The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
•If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
ENGLISH 3

•Before maintenance, deactivate the appliance and
disconnect the mains plug from the mains socket.
•Do not use water spray and steam to clean the
appliance.
•Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
2. SAFETY INSTRUCTIONS
2.1 Installation
•Remove all the packaging and the
transit bolts.
• Keep the transit bolts. When you move
the appliance again you must block the
drum.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not install or use a damaged
appliance.
• Obey the installation instruction
supplied with the appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C or where it is exposed to the
weather.
• Make sure that the floor where you
install the appliance is flat, stable, heat
resistant and clean.
• Make sure that there is air circulation
between the appliance and the floor.
• Adjust the feet to have the necessary
space between the appliance and the
carpet.
• Do not install the appliance where the
appliance door can not be fully
opened.
2.2 Electrical Connection
• The appliance must be earthed.
• Always use a correctly installed
shockproof socket.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by
our Authorised Service Centre.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• Do not touch the mains cable or the
mains plug with wet hands.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Only for UK and Ireland: The appliance
has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
• This appliance complies with the E.E.C.
Directives.
2.3 Water connection
• Make sure not to cause damage to the
water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
2.4 Use
WARNING!
Risk of injury, electrical
shock, fire, burns or damage
to the appliance.
• Use this appliance in a household only.
www.electrolux.com4

• Obey the safety instructions on the
detergent packaging.
•Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Make sure that you remove all metal
objects from the laundry.
• Do not put a container to collect
possible water leakage under the
appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
• Do not touch the glass of the door
while a programme operates. The
glass can be hot.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
•Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
3. PRODUCT DESCRIPTION
3.1 Appliance overview
1
2
3
4
5
6
7
1Worktop
2Detergent dispenser
3Control panel
4Door handle
5Drain pump filter
6Rating plate
7Feet for the appliance level
ENGLISH 5

4. CONTROL PANEL
4.1 Control panel description
Temp.
Spin
Delay
Start
Quick Extra
Rinse
Prewash
20°
90° 40°
30°
600
60°
800
1000
400
3h 6h 9h
Delay Start
1 2 3
9
6
8
5
7
4
1Programme knob
2Spin reduction touchpad (Spin)
3Temperature touchpad (Temp.)
4Prewash touchpad (Prewash)
5Delay start touchpad (Delay Start)
6Extra rinse touchpad (Extra Rinse)
7Quick touchpad (Quick)
8Start/Pause touchpad (Start/
Pause)
9Programme status indicators:
Door locked indicator
End cycle indicator
Child lock indicator
5. PROGRAMMES
5.1 Programme Chart
Programme
Temperature
range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Washing programmes
Cottons
90°C - Cold
4 kg
1000 rpm
White cotton and coloured cotton. Normal soil
and light soil.
Cottons Eco1)
60°C - 40°C
4 kg
1000 rpm
White cotton and colour-fast cotton. Normal
soil. The energy consumption decreases and the
time of the washing programme is extended.
www.electrolux.com6

Programme
Temperature
range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Synthetics
60°C - Cold
2 kg
1000 rpm
Synthetic items or mixed fabric items. Normal
soil.
Delicates
40°C - Cold
2 kg
1000 rpm
Delicate fabrics as acrylics, viscose, polyest-
er items. Normal soil.
Wool/Handwash
40°C - Cold
1.5 kg
1000 rpm
Machine washable wool, hand washable wool
and delicate fabrics with «hand washing» care
symbol.2)
Silk
30°C
1 kg
800 rpm
Special programme for silk and mixed synthetic
items.
Bedding
60°C - 30°C
2 kg
800 rpm
Special programme for one synthetic blanket,
duvet, bedspread and so on.
Rinse
Cold
4 kg
1000 rpm
To rinse and spin the laundry. All fabrics.
Drain
4 kg To drain the water in the drum. All fabrics.
Spin
4 kg
1000 rpm
To spin the laundry and to drain the water in the
drum. All fabrics.
Jeans
60°C - Cold
4 kg
1000 rpm
Items in denim and jersey. Also for dark col-
oured items.
Curtains
40°C - Cold
1 kg
800 rpm
Special programme for curtains. The prewash
phase is activated automatically.3)
Refresh
30°C
2 kg
800 rpm
Synthetic and delicate items. Light soil items or
items to refresh.
ENGLISH 7

Programme
Temperature
range
Maximum
load
Maximum
spin speed
Programme description
(Type of load and soil level)
Quick
30°C
1 kg
800 rpm
Synthetic and mixed fabric items. Light soil and
items to freshen up.
1) Standard programmes for the Energy Label consumption values. According to regu-
lation 1061/2010, these programmes are respectively the «Standard 60°C cotton programme»
and the «Standard 40°C cotton programme». They are the most efficient programmes in terms
of combined energy and water consumption for washing normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature de-
clared for the selected programme.
2) During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the
drum doesn't rotate or doesn't rotate properly. Consider this as a normal functioning of the ap-
pliance.
3) Do not use any detergent for prewash phase to rinse only with water.
Programme options compatibility
Programme 1)
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■
■ ■ ■
■ ■
■ ■ ■ ■ ■
■ ■
■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■
■ ■ ■
www.electrolux.com8

Programme 1)
■ ■ ■
1) When you set the Quick option, we recommend that you decrease the quantity of the laun-
dry. It is possible to keep the full load but the washing results can be unsatisfactory. Recom-
mended load: cotton: 2 kg, synthetics and delicates: 1 kg.
6. CONSUMPTION VALUES
The data of this table are approximate. Different causes can change the
data: the quantity and type of laundry, the water and ambient temperature.
Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water con-
sumption
(litre)
Approxi-
mate pro-
gramme
duration
(minutes)
Remaining
moisture
(%)1)
Cottons 60 °C 4 0.59 34 125 60
Cottons 40 °C 4 0.55 38 117 60
Synthetics 40 °C 2 0.39 41 64 37
Delicates 40 °C 2 0.45 51 47 37
Wool/Handwash
30 °C 1.5 0.40 61 40 32
Standard cotton programmes
Standard 60 °C
cotton 4 0.66 46 183 60
Standard 60 °C
cotton 2 0.59 37 155 60
Standard 40 °C
cotton 2 0.45 37 147 60
1) At the end of spin phase.
Off Mode (W) Left On Mode (W)
0,48 0,48
The information given in the chart above are in compliance with the EU Commission
regulation 1015/2010 implementing directive 2009/125/EC.
ENGLISH 9

7. OPTIONS
7.1 Temp.
Set this option to change the default
temperature.
Indicator = cold water.
The indicator of the set temperature
comes on.
7.2 Spin
With this option you can change the
default spin speed.
The indicator of the set speed comes on.
Additional spin options:
No Spin
• Set this option to deactivate all spin
phases. Only the drain phase is
available.
• The related indicator comes on.
• Set this option for very delicate fabrics.
• The rinses phase uses more water for
some washing programmes.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The drum turns regularly to prevent the
laundry creases.
• The door stays locked. You must drain
the water to unlock the door.
To drain the water refer to ‘At
the end of the programme’.
7.3 Prewash
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
7.4 Delay Start
With this option you can delay the start of
a programme by 9, 6 or 3 hours.
The indicator of the option and the
indicator of the set value are on.
7.5 Extra Rinse
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water is
soft.
The related indicator comes on.
7.6 Quick
With this option you can decrease the
programme duration.
Use this option for items with light soil or
items to refresh.
The related indicator comes on.
8. SETTINGS
8.1 Child Lock
With this option you can prevent that the
children play with the control panel.
•To activate/deactivate this option,
press and at the same time
until the indicator comes on/goes
off.
You can activate this option:
• After you press : the options and
the programme knob are locked.
•Before you press : the appliance
cannot start.
8.2 Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.
www.electrolux.com10

• To activate/deactivate this option
press and at the same time
until the indicator comes on/goes
off.
8.3 Acoustic signals
The acoustic signals operate when:
•The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press and at the same
time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
9. BEFORE FIRST USE
1. Put 2 litre of water in the detergent
compartment for washing phase.
This activates the drain system.
2. Put a small quantity of detergent in the
compartment for washing phase.
3. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Loading the laundry
1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
4. Close the door.
CAUTION!
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
10.2 Using detergent and
additives
1. Measure out the detergent and the
fabric conditioner.
2. Carefully close the detergent drawer
21
10.3 Detergent compartments
CAUTION!
Use only specified detergents
for washing machine.
ENGLISH 11

Always obey the instructions
that you find on the
packaging of the detergent
products.
1Detergent compartment for pre-
wash phase or soak programme
(if available). Add the detergent
for prewash and soak before the
start of the programme.
2Detergent compartment for
washing phase. If you use a liq-
uid detergent, put it immediately
before you start the programme.
Compartment for liquid additives
(fabric conditioner, starch). Put
the product in the compartment
before you start the programme.
10.4 Liquid or powder detergent
1. 2.
A
3.
B
4.
• Position A for powder detergent (factory setting).
•Position B for liquid detergent.
When you use the liquid detergent:
•Do not use gelatinous or thick liquid detergents.
• Do not put more liquid then the maximum level.
• Do not set the prewash phase.
• Do not set the delay start.
10.5 Setting a programme
1. Turn the programme knob and set the
programme:
•The indicator of the flashes.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something
incorrect, the indicator
flashes red.
www.electrolux.com12

10.6 Starting a programme
without the delay start
Press the .
•The indicator of the stops to
flash and stays on.
•The programme starts, the door
locks, the indicator is on.
•The drain pump can operate for a
short time at the beginning of the
washing cycle.
10.7 Starting a programme with
the delay start
1. Press to set the delay you want to
set.
The indicator of the set delay is on. The
indicator is on.
2. Press :
•The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the delay start
before you press the .
To cancel the delay start :
a. Press to set the appliance to
pause
b. Press until the indicator of the
set delay goes off.
Press again to start the
programme immediately.
10.8 Interrupting a programme
and changing the options
You can change only some options before
they operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press again.
The programme continues.
10.9 Cancelling a running
programme
1. Turn the programme knob to position
to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.10 Opening the door when
the delay start operates
While a delay start operates, the appliance
door is locked and the indicator is on.
1. Press the to pause the appliance.
2. Wait until the door lock indicator
goes off.
3. You can open the door.
4. Close the door and press the
again.
The delay start continues to operate.
10.11 Opening the door when
the programme operates
While a programme operates, the
appliance door is locked and the indicator
is on.
CAUTION!
If the temperature and level of
the water in the drum are too
high, you cannot open the
door.
1. Turn the programme knob to position
to deactivate the appliance.
2. Wait for some minutes and then open
the appliance door.
3. Close the appliance door.
4. Set the programme again.
ENGLISH 13

10.12 At the end of the
programme
•The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• The indicator of the button goes
off.
•The door lock indicator goes off.
•The indicator is on.
•You can open the door.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Close the water tap.
• Turn the programme knob to position
to deactivate the appliance.
•Keep the door ajar, to prevent the
mildew and odours.
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent the
creases in the laundry.
• The door lock indicator is on. The
indicator flashes. The door stays
locked.
•You must drain the water to open the
door.
To drain the water:
1. If necessary, decrease the spin speed.
If you set , the appliance only
drains.
2. Press . The appliance drains the
water and spins.
3. When the programme is completed
and the door lock indicator goes
off, you can open the door.
4. Turn the programme knob to position
to deactivate the appliance.
The appliance drains and
spins automatically after
approximately 18 hours
(except for Wool programme).
10.13 Stand-by
Some minutes after the end of the
washing programme, if you do not
deactivate the appliance, the energy
saving status activates.
The energy saving status decreases the
energy consumption when the appliance
is on the stand by.
•All indicators go off.
• The indicator of the flashes slowly
•Press one of the options to deactivate
the energy saving status.
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
11.1 The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
•Obey the washing instructions that are
on the laundry care labels.
• Do not wash together white and
coloured items.
• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
• Empty the pockets and unfold the
items.
• Turn inside out multilayered fabrics,
wool and items with painted
illustrations.
•Remove hard stains.
• Wash with a special detergent heavy
soil stains.
• Be careful with the curtains. Remove
the hooks or put the curtains in a
washing bag or pillowcase.
• Do not wash in the appliance laundry
without hems or with cuts. Use a
washing bag to wash small and/or
delicate items (e.g. underwired bras,
belts, tights, etc. ).
• A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase again.
www.electrolux.com14

11.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the
appliance.
Special stain removers are available. Use
the special stain remover that is applicable
to the type of stain and fabric.
11.3 Detergents and additives
• Only use detergents and additives
specially made for washing machines:
–powder detergents for all types of
fabric,
– powder detergents for delicate
fabrics (40 °C max) and woollens,
– liquid detergents, preferably for low
temperature wash programmes (60
°C max) for all types of fabric, or
special for woollens only.
• Do not mix different types of
detergents.
• To help the environment, do not use
more than the correct quantity of
detergent.
• Obey the instructions that you find on
the on packaging of these products.
• Use the correct products for the type
and colour of the fabric, the
programme temperature and the level
of soil.
• If your appliance has not the detergent
dispenser with the flap device, add the
liquid detergents with a dosing ball
(supplied by the detergent's
manufacturer).
11.4 Ecological hints
• Set a programme without the prewash
phase to wash laundry with normal soil.
• Always start a washing programme
with the maximum load of laundry.
• If necessary, use a stain remover when
you set a programme with a low
temperature.
• To use the correct quantity of the
detergent, check the water hardness of
your domestic system
11.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you use
a water softener for washing machines. In
areas where the water hardness is soft it is
not necessary to use a water softener.
To know the water hardness in your area,
contact your local water authority.
Use the correct quantity of the water
softener. Obey the instructions that you
find on the packaging of the product.
12. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
12.1 External cleaning
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents
or chemical products.
12.2 Descaling
If the water hardness in your area is high
or moderate, we recommend that you use
a water descaling product for washing
machines.
Regularly examine the drum to prevent
limescale and rust particles.
To remove rust particles use only special
products for washing machine. Do this
separately from the laundry wash.
Always obey the instructions
that you find on the
packaging of the product.
12.3 Maintenance wash
With the low temperature programmes it is
possible that some detergent stays in the
drum. Make regularly a maintenance
wash. To do this:
•Remove the laundry from the drum.
ENGLISH 15

• Set the cotton programme with the
highest temperature with a small
quantity of detergent.
12.4 Door seal
Regularly examine the seal and remove all
objects from the inner part.
12.5 Cleaning the detergent dispenser
1. 2.
3. 4.
www.electrolux.com16

5. 6.
12.6 Cleaning the inlet hose and the valve filter
1. 2.
3. 4.
12.7 Cleaning the drain filter
WARNING!
Do not clean the drain filter if
the water in the appliance is
hot.
ENGLISH 17

1. 2.
3. 4.
5.
12
6.
7. 8.
www.electrolux.com18

9.
1
2
10.
12.8 Emergency drain
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (9) of
'Cleaning the drain filter'. If necessary,
clean the pump.
When you drain the water with the
emergency drain procedure, you must
activate again the drain system:
1. When you drain the water with the
emergency drain procedure, you must
activate again the drain system: Put 2
litres of water in the main wash
compartment of the detergent
dispenser.
2. Start the programme to drain the
water
12.9 Frost precautions
If the appliance is installed in an area
where the temperature can be less than
0° C, remove the remaining water from the
inlet hose and the drain pump.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Put the two ends of the inlet hose in a
container and let the water flow out of
the hose.
4. Empty the drain pump. Refer to the
emergency drain procedure.
5. When the drain pump is empty, install
the inlet hose again.
WARNING!
Make sure that the
temperature is more than 0
°C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 Introduction
The start of the appliance does not occur
or it stops during operation.
First try to find a solution to the problem
(refer to the table). If not, contact the
Authorised Service Centre.
With some problems, the acoustic signals
operate. The red indicator flashes and
one of the indicators comes on, to show
an alarm code:
• - The appliance does not fill with
water properly.
• - The appliance does not drain the
water.
• - The appliance door is open or
not closed correctly. Please check the
door!
ENGLISH 19

• The indicator of button Start/Pause
flashes in red 11 times and 1 (or 2 or 3)
time(s) in yellow: the mains supply is
unstable. Wait until the mains supply is
stable and the appliance automatically
starts operating.
WARNING!
Deactivate the appliance
before you do the checks.
13.2 Possible failures
Problem Possible solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is not a damaged fuse in the fuse box.
Make sure that the Start/Pause has been pressed.
If the delay start is set, cancel the setting or wait for the end
of countdown.
Deactivate the Child Lock function if it is on.
The appliance does not
fill with water properly.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to “Care and cleaning”.
Make sure that the inlet hose has no kinks or bends.
Make sure that the connection of the water inlet hose is cor-
rect.
The appliance does not
fill with water and drain
immediately.
Make sure that the drain hose is in the correct position. The
hose may be too low.
The appliance does not
drain the water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the filter,
if necessary. Refer to 'Care and cleaning'.
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without
drain phase.
Set the drain programme if you set an option which ends
with water in the tub.
www.electrolux.com20