OPERATING INSTRUCTIONS MWX445RB
WATERTEMPERATURE
Warm Wash Cold Wosh
Cold PJnse Cord Rinse
Hol Wash Warm Wash
Cold Rinse, • Worm Ri_;e
WATERLEVEL
Medium
Res_l
KNITS&
DEUCATE$ spln
dnse
9CYCLE
off 15 12
O= • =8 4REGULAR
Before OperatingYour
Washer
Read your washer Owner's Guide. It contains
important safety and warranty information. It
also contains many suggestions for obtaining
the best results from your washer.
Operating Steps
Read and follow Washing Procedures in your
Owner's Guide. It provides detailed information
for preparing the wash load and choosing control
settings to ensure best washing results.Washing
Products in your Owner's Guide provides
detailed information for choosing effective
products and using them safely.
1. Sort laundry into loads that can be
washed together.
2. Prepare items for washing.
4. Add the measured amount of detergent
to the washer before adding the laundry
load.
5. If desired, add liquid bleach to the Bleach
Dispenser.
6. Add the laundry load to the wash tub.
7. Set washer controls according to type,
size, and soil level of each load:
Water Temperature
Water Level
SeeControls and theControl Settings Chart
(reverse side) for more information on
suggested water temperatures and water
level,
8. Push in the cycle selector knob and turn
it clockwise to the desired wash cycle.
See Cycle Selection for cycle descriptions
.
and the Control Settings Chart for
suggested cycle settings.
Start the washer by closing the lid and
pulling out the cycle selector knob. The
washer will operate with the lid open;
however, the tub will not spin unless the lid
is closed, To stop the washer, push in the
cycle selector knob. To change acycle,
push in the cycle selector knob and turn it
clockwise to the desired setting. Pull out the
knob to restart the washer.
10. If desired, add liquid fabric softener
during the final rinse.
11.Remove items when the cycle is
completed. As a safety measure, the lid
will AUTOMA-TICALLY LOCK during the spin
3. Pretreat stains and heavy soil. P/N 131313900 (9401)
