Electron LCD2622E User manual

Please read this User Manual carefully to ensure the proper use of this product and
keep this manual for future reference
Model: LCD2622E
USER S MANUAL
,

Contents
1 Safety and warnings..........................................................................................................2-6
2 Introduction....................................................................................................................7
3 Installation............................................................................................... ......................8-12
TV Operation.................................................................................................................14-15
TV Trouble shooting.......................................................................................................16
4 Remote Control ...........................................................................................................13
5
6
-1-
7Wall Mounting Holes Spacing and Location..........................................................................
8Base Stand Disassemble Illustration.....................................................................................
17
17

-2-
SAFETY AND WARNINGS
1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8.Do not install near any heat sources such as radiators,stoves, or other apparatus
(including
9.Protect the power cord from being walked on or pinched particularly at power outlets, and the
point where they exit from the apparatus.
10.Only use attachments/accessories specified by the manufacturer.
11.Unplug this apparatus during lightning storms or when unused for long periods of time.
12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture ,
does not operate n
13.Apparatus must not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, should
amplifiers)that produce heat.
ormally, or has been dropped.
be placed on the apparatus.
IMPORTANT SAFETY INSTRUCTION
14.WARNINING:The battery (battery or batteries or battery pack)shall not be exposed to excessive
heat such as sunshine, fire or the like.
15.The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

-3-
SAFETY AND WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
The symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
WARNING:
Correct Disposal of this product. This making indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for environmental
Safe recycling.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage
and user accessible parts. When servicing use only identical replacement parts.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or cords.

-4-
SAFETY AND WARNINGS
Warning
High voltages are used in the operation of this television receiver.
Do not remove the cabinet back from your set. Refer servicing to
qualified service personnel.
Warning
To prevent fire or electrical shock hazard, do not expose the
television receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet slots or
openings. Never spill any kind of liquid on the television receiver.
Caution
Do not block the ventilation holes in the back cover. Adequate
ventilation is essential to prevent failure of electrical components.
Caution
Do not trap the power supply cord under the television receiver.

-5-
SAFETY AND WARNINGS
Caution
Never stand on, lean on, or suddenly push the television or its stand.
You should pay special attention to children. Serious injury may result
if it falls.
Caution
Do not place your television on an unstable cart, stand, shelf or table.
Serious injury to an individual , and damage to the television, may
result if it falls.
Avoid exposing the television receiver to direct sunlight and other
sources of heat. Do not stand the television receiver directly on other
products which give off heat, e.g. video cassette players and audio
amplifiers. Do not place naked flame sources, such as lighted candles
on the television.
Caution
If the television is to be built into a compartment or similar enclosure,
the minimum distances must be maintained. Heat build-up can reduce
the service life of your television, and can also be dangerous.
Caution
Dim:515*320mm(
Caution
When the television receiver is not used for an extended period of
time, it is advisable to disconnect the AC power cord from the AC
outlet.

-6-
SAFETY AND WARNINGS
Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this
manual carefully and keep it handy for easy reference.
INSTALLATION
CAUTION
Locate the TV in the room where light does not strike the screen .
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid extremely warm locations to prevent possible damage to the cabinet or premature component
failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC supply or any other
power supply.
Do not cover the ventilation openings when using theTV.
directly
Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this
manual. All LCD-TVs are high voltage instruments. When you clean up dust or water drops on the LCD
PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with
a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage
to your TV.
All repairs to this TV should only be performed by qualified TV service personnel.
Earthing connection--- The apparatus shall be connected to MAINS socket outlet with a protective
earthing connection
MAINS plug or appliance coupler of the apparatus is used as disconnect device, it should remains
readily operable
Warning: Change or modifications to this unit not expressly by the part responsible for
compliance could void the user's authority to operate the Equipment.

Main features
INTRODUCTION
Used as Television, display terminal,PC display
High luminance,wide viewing angle
Can store AIR 2-69,HRC 1-125,IRC 1-125,
CATV 2-125 TV programs
HDMI interface
-7-
Main parameter
AC Power Cord......................... 1
Infrared Remote Controller...... 1
User s Manual...............................1
Battery(AAA)...............................2
Accessories
Vie wing Picture Size(diagonal)
Resolution 1366x768
Aspect Ratio 16 : 9
TV System
Video Signal System PAL/NTSC/SECAM
Receiving Channel
Inpu t Power Voltage AC 100 V-240 V~ 50/60Hz
Po wer consumption
Audio Outpu t Power THD 7% 2x 3W
Signal Input Analog RGB(VGA) x1
High-Definition Multimedia Interface(HDMI) x1
Rear AV x1
Audio Input x1
YCb (Pb )Cr (P R) x1
Horizontal definition TV line Composite Video in pu t >=350
S-Video Input >=400
Y Cb(Pb ) Cr(Pr) >=400
Side AV x1
Side HEAD PHONE x1
130W
Response Time 8ms
Viewing Angle
Brightness 400cd/m2
AIR 2-69 HRC 1-125 IRC 1-125 CATV 2-125
V
150
H/
160

-8-
INSTALLATION
Front panel KEYBOARD
SOURCE
MENU
CH+
CH-
VOL+
VOL-
USB
1 SOURCE Display the input source menu.
CH+ or CH- to select items
in MENU.
2MENU
3 CH+/CH-
4VOL+/VOL-
To display main MENU.
In Analogue TV mode press CH+ or CH- to
change the channel up and down.
In MENU,press
In standby mode, it can turn on the TV.
Adjust sound level.
In MENU,adjust the item that you selected.
REAR AV PASTER
All the terminals are(from left to right):
Note: 1.AV1 share one audio channel.
2. When HDMI port get DVI signal, the PC Audio channel is changed to
receive the audio for HDMI port.
AC POWER SOCKET,ANTENNA , PC AUDIO INPUT,AUDIO INPUT,
YPbPr,AV1,VGA , HDMI .
and YPbPr
1
ENTER
2 3
4 5 6
7 8 9 0
+
CH
_
+
_
VOL
POWER MUTE
NICAM
RECALL
TVMENU INPUT
DVBMENU SOUND EXIT
PIC
SLEEP ASPECT
TEXTDISPLAYSOURCE
INFO FAV EPG
REVEAL HOLD LIST INDEX
SUBPAGE SIZE AUDIO SUBTITLE
30 30
2
1
3
4
1: Remote control sensor.
2: Indicator LED: GREEN POWER ON.
RED STAND BY.
3: (see next page).Control Panel
4: Power: Press this button to turn the unit
ON from STANDBY mode.
Press it again to turn the set back to
STANDBY.
5: when TV is in standby mode, press CH + or
CH button in TV control panel will power
on the TV.
SIDE PANEL(LEFT)
HEADPHONE
VIDEO
L
R
AV2
All the terminals are(from up to down):
HEAD PHONE, Av2.

ANTENNA
INSTALLATION
-9-
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.

INSTALLATION
-10-
STEPS:
PC
Be sure both the TV and computer are Power off.
1.Connect VGA and audio cable
2.Connect power cord
3.Power on the TV, switch to PC mode
4.Power on the PC
This sequence is very important.
PC
PRESET MODE
1
2
3
800*600
1024*768
1280*768
60
60
60
37.88
48.36
47.3
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
NOTE:
PC V.Freq.(Hz) not more than 60Hz.
8

INSTALLATION
-11-
AV EQUIPMENT
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game
or stereo system, etc.....
YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i,1080p.
dio
VIDEO EQUIPMENT with YPbPr
Y
To au
outputswith
terminal
VIDEO EQUIPMENT
Yellow (video)
White(audol L)
Red(audio R)
Y
W
R
R
W
Y
output
To video
GB
R
GBR
Pr
Y
Pb
R
G
B
W
HDMI
HEADPHONE
VIDEO
L
R
AV2
This TV provides three groups of AV ,one S-Video,one group of YPbPr and for convenient
connection to VCR,DVD or other video equipment. Please refer to the owner s
manual of the equipment to be connected as well.
You can use the input terminals on TV set rear as follows.
HDMI cable not included

-12-
Remark:
BATTERY INSTALLATION
Insert Batteries Into the Remote Control
1. Remove the battery cover.
2. Insert the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks Inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control
Unit.
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for a
long time.
123

REMOTE CONTROL
-13-
REMOTE CONTROL
ENTER
VOL-
123
45 6
7890
POWER MUTE
MENU
EXIT
SOURCE
TV DISPLAY
+
_
VOL
+
CH
_
S.M
P. M
RECALL
AUTO V-CHIPCC
TV AV HDMI
SLEEP
TV SOURCE
YPbPr
ASPECT
VGA
111
2
3
4
6
5
7
8
9
10
12
14
13
15
16
17
19
20
1:
To set the TV standby or on.
2:
To adjust sound level.
3:
To display TV menu.
4:
To move within the menu.
5:
Used to return to the previous menu or
exit menu.
6: :
For direct access to program. For
a 2 (3) digit program number,
The second (third) digit must be
entered before the dash disappears.
Channel number will be displayed
for a few seconds.
7:
Auto adjust in PC mode.
8:
Display caption during closed caption
9:
10:
SettimetoturnofftheTV
11:
To disable or enable the sound.
12:
To change picture aspect
13:
To switch sound mode.
program.
14:
To access the next or previous
Program.
Menu.
15: P
To switch picture mode.
16:
To display or exit TV input source
17:
Confirms selection.
18:
Displays/removes the program
Information
19:
To change TV SOURCE
[CABLE,AIR]
20
21
Enter parent ctrl
POWER
VOL+/-
MENU
CURSOR
EXIT
NUMBER KEY
AUTO
CC
SLEEP
MUTE
ASPECT
S.M
CH+/CH-
.M
SOURCE
ENTER
TV DISPLAY
TV SOURCE
V-CHIP
Direct key to change input Source.
RECALL
To access the previously viewed
18
21

TV OPERATION
-14-
Note:
1
2. Four picture modes: STANDARD,MOVIE,
VIVID,USER.
3.HUE is available in NTSC system only.
.Three color temperatures: NORMAL,
WARM,COOL.
2.SOUND MENU
Ô
USER
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
PICTURE MODE
MENU
ADJUST EXIT
SELECT
PICTURE
COLOR TEMP
16 9
NORMAL
PICTURE
SCALE 16:9
MENU
ADJUST EXIT
SELECT
1. PICTURE MENU
The first item of the MENU is picture menu.
You can adjust picture here,such as contrast,
brightness,etc.press to move,press
To Adjust.
The second item of the MENU is SOUND
MENU.You can adjust sound here.
Press to move,press to adjust.
SOUND MODE
BASS
TREBLE
BALANCE
ADJUST
SELECT
USER
SOUND
MENU
EXIT
3.CHANNEL MENU
The third item of the MENU is channel menu
(Only in TV mode).You can complete
channel Search and setting here.
1.AUTO SCAN:Search all the channels
automatically.
2.ADD/ERASE:To skip the current channel
yesornot.
3.SOURCE:CABLE,AIR.
4.C.CAPTION:adjust c.c. Type.
5.PARENTAL CTRL: enter parent ctrl menu,
The default password is 6666.
4.FUNCTION MENU
The fourth item of the MENU is function
menu.You can adjust settings below.
1.SLEEP TIMER:adjust sleep time
2.DNR: noise reduction
3.MEMORY RECALL: Reset all the
Settings to default value.
AUTO SCAN
ADD/ERASE ADD
SOURCE CABLE
C.CAPITION
OFF
ADJUST
SELECT
MENU
EXIT
PARENT CTRL
FUNCTION
SLEEP TIMER
DNR ON
MEMORY RECALL
ADJUST
SELECT
MENU
EXIT
0

-15-
TV OPERATION
5.OSD MENU
The sixth item of the MENU is OSD
Menu.
You can adjust setting below .
1.PASSWORD:you can change the
current PARENTAL CTRL password.
2.PARENTAL CTRL, you can turn off or
On it .
3.TV-RATING,you can enter TV rating
Menu to adjust.
PARENTAL CTRL
Auto adjust in PC mode only.
6.PC MENU
This MENU is available in PC only.
You can adjust the PC effect and position.
V-CHIP
PASSWORD
OFF
ENGLISH RATING
FRANCE RATING
TV-RATING
ADJUST
SELECT
MENU
EXIT
MOVIE RATING
PARENTAL CTRL
LANGUAGE ENGLISH
H-POSITION
V-POSITION
HALFTONE
OSD SIZE 1 TIMES
ADJUST
SELECT
MENU
EXIT
OSD
DURATION
Ô
Ô
ADJUST
SELECT
MENU
EXIT
H-POSITION
V-POSITION
CONTRAST
BRIGHTNESS
CLOCK
PHASE
PC
Ô
Ô
COLOR TEMP
SCALE
AUTO ADJUST
16:9
ADJUST
SELECT
MENU
EXIT
PC
And use ENTER key to switch Block/ Unblock
feature.
Parental
Control
Rating Content
FV
(Fantasy
violence)
V
(Violence)
S
(Sexual
situation)
L
(Adult
language)
D
(Sexually
suggestive
dialog)
Suggested
age
TV-Y (All
children)
TV-Y7(Direct to
order children)
TV-G(General
audience)
TV-PG(Parental
Guidance
suggested)
TV-14(Parents
strongly
cautioned)
TV-MA(Mature
audience only)
X
X
X
X
X
X
X
X
X
X
X
X
Content
2).MPAA:switch the movie-rating control level: N/A,
G, PG, PG-13,R,NC-17,X.
Rating Description
Age
G General audiences, All Ages admitted
PG
Parental Guidance suggested. Some material may not be
Suitable for children.
PG-13 Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
R
NC-17
X
Restrict. Under 17 requires accompanying parent or adult
guardian(age varies in some jurisdictions)
No one 17 and under admitted.
X is an order rating that is unified with NC-17 but may be
encoded in the data of order movies.
ADJUST
SELECT
MENU
EXIT
PARENTAL CTRL
ALLFVVS L D
NONE
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ENTER KEY: BLOCK / UNBLOCK
B
B
TV-Y
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B

Picture Audio
Snow Noise antenna position, direction
or connection
Inspection
Interfere Noise electronic equipment,car/
motorcycle,fluorescent light
Normal Picture Mute
Volume(inspect wether the
mute function on the remote
control are started , or audio
system are correct or not)
No picture Mute
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
No color Normal audio color control
Scramble Normal audio
or weak
retune channel
No color Noise Audio system
Normal audio
antenna position, direction
or connection
Trouble phenomenon
Ghost
-16-
Trouble shooting

Wall Mounting Holes Spacing and Location
Base Stand Disassemble Illustration
How to remove the stand from the TV
1.Use the screwdriver to remove the screws
from the screw location. 1.Remove the base stand from the
Main body.
Main accessories
Main body Base Stand 8 Screws
-17-
100 mm
200 mm