Electron LCD1905E User manual

Please read this User Manual carefully to ensure the proper use of this product and
keep this manual for future reference
Model: LCD1905E
USER S MANUAL
,

Contents
1 Safety and warnings...............................................................................2-6
2 Introduction...........................................................................................7
3 Installation............................................................................................8-13
4 Remote control......................................................................................14
5 Operation............................................................................................15-16
6 Trouble Shooting..................................................................................17
-1-
7 .......................................................Wall Mounting Holes Spacing and Location
8 ..................................................................
Base Stand Disassemble Illustration
18
18

1.Read these safety instructions.
2.Keep these safety instructions.
3.Heed all warnings.
4.Follow all safety instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturers
instructions.
8.Do not install near any heat sources such as radiators, heat registers,stoves, or other
apparatus (including
9.Do not defeat the safety purpose of the polarized or grounding type plug.A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide
10.Protect the power cord from being walked on or pinched particularly at plugs
convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Unplug this apparatus during lightning storms or when unused for long periods of time.
13.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture , does not operate
14.Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases,
15.Splashing The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, splashing and no objects filled with liquids such as vases, shall be
placed on the apparatus.
16.A warning that an apparatus with class I construction shall be connected to a MAINS
Socket outlet with a protective ear thing connection.
amplifiers)that produce heat.
blade or the third prong are provided for your safety.
If electrician for replacement of the obsolete outlet.
Normally, or has been dropped.
shall be placed on the apparatus. important safety instruction.
IMPORTANT SAFETY INSTRUCTION
IMPORTANT SAFETY INSTRUCTIONS
-2-
17.WARNINING:The battery (battery or batteries or battery pack)shall not be exposed
to excessive heat such as sunshine, fire or the like.
18.The mains plug is used as disconnect device, the disconnect device shall remain
readily operable.

-3-
IMPORTANT SAFETY INSTRUCTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous voltages constituting a risk of electric
shock are present within this unit.
The symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
WARNING:
Correct Disposal of this product. This making indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
Purchased. They can take this product for environmental
Safe recycling.
This symbol indicates that this product incorporates double insulation between hazardous mains
voltage and user accessible parts. When servicing use only identical replacement parts.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or cords.

-4-
Warning
High voltages are used in the operation of this television
receiver.
Do not remove the cabinet back from your set Refer
servicing to qualified service personnel.
Warning
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Warning
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Caution
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Caution
Do not squash power supply cord under the
television receiver.
WARNINGS AND CAUTIONS

-5-
Caution
Never stand on, lean on, or suddenly push the television or its
stand. You should pay special attention to children. Serious
injury may result if it falls.
Caution
Do not place your television on an unstable cart, stand, shelf or
table.
Serious injury to an individual , and damage to the television,
may result If it falls.
Caution
When the television receiver is not used for an extended
period of time, it is advisable to disconnect the AC power cord
from the AC outlet.
Avoid exposing the television receiver to direct sunlight and
other sources of the heat. Do not stand the television receiver
directly on other produces which give off heat. E.g. video
cassette players and audio amplifiers. Do not place naked
flame sources, such as lighted candles on the television.
Caution
If the television is to be built into a compartment or similar
enclosed, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and can
also be dangerous.
Caution
Dim:515*320mm(
WARNINGS AND CAUTIONS

Thank you very much for purchasing this TV. To enjoy your product from the very
beginning, read this manual carefully and keep it handy for ready reference.
INSTALLATION
CAUTION
Locate the TV in the room where light does not strike the screen .
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and
indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid extremely warm locations to prevent possible damage to the cabinet or
premature component failure.
This TV can be connected to AC 100-240 Volts. 50/60 Hz. Never connect to a DC
supply or any other power supply.
Do not cover the ventilation openings when using theTV.
directly
Never tamper with any components inside the TV, or any other adjustment controls not
mentioned in this manual. All LCD-TVs are high voltage instruments. When you clean
up dust or water drops on the LCD PANEL or CABINET, the power cord should be
pulled out from the receptacle, then wipe the TV with dried soft cloth. During thunder
and lightning, unplug the power cord and antenna cord to prevent damage to your TV.
All repairs to this TV should only be performed by the TV service personnel.
-6-
Warning: Change or modifications to this unit not expressly by the part responsible for
compliance could void the use's authority to operate the Equipment.
WARNINGS AND CAUTIONS

Main features
Used as Television,display terminal,PC display
High luminance,wide viewing angle
Can store 125 TV programs
Translucency OSD Auto-search
Full function Remote Control
-7-
5
INTRODUCTION
48
300
464 140 392
4.7
NTSC-M
45
800:1
HDMI
VGA
19
75
,NTSC-N
A
5
Note: AV means VIDEO INPUT

INSTALLATION
-8-
Infrared Remote Control............1
Users Manual........................
Battery(AAA)............................2
Accessories Front panel
REAR AV Connection
All the terminals are(from left to right):
AC INPUT,HDMI ,VGA ,AV,YPbPr,AUDIO INPUT,PC AUDIO INPUT ,ANTENNA
Note: 1.AV means INPUT
2.VIDEO and share one audio channel.
VIDEO
YPbPr
Side panel
1 SOURCE
Display the input source menu.
In TV mode press CH+ or CH- to
change the channel up and down.
In MENU,press CH+ or CH- to
select items in MENU.
when TV is in standby mode, press
CH+orCH-buttoninTVcontrol
panel will power on the TV.
2 MENU
3 CH+/CH-
4 VOL+/VOL-
To display TV MENU.
Adjust sound level.
In MENU,adjust the item that you
Selected.
100-240V~ 50/60Hz
AC INPUT
AV
Pr
Y
Pb
HDMI INPUT
VGA INPUT
RF INPUT
PC
AUDIO INPUT
YPbPr
INPUT AUDIO
INPUT L
R
100-240V~ 50/60Hz
1
User s Manual........................
1
4
2
3
30 30
2
1
3
4
1:Remote control sensor.
2:Indicator LED:GREEN POWER ON.
RED STAND BY.
3: (see next page).Control Panel
4: Power:Press this button to turn the unit
ON from STANDBY mode.
Press it again to turn the set back to
STANDBY.
ENTER
123
456
7890
POWER MUTE
MENU
EXIT
SOURCE
TVDISPLAY
+
_
VOL
+
CH
_
S.M
P.M
RECALL
AUTO V-CHIPCC
TV AV HDMI
SLEEP
TVSOURCE
YPbPr
ASPECT
VGA

INSTALLATION
-9-
ANTENNA
Note:
Aerial connections:IEC(female).
Input impendance:75 unbalanced.

INSTALLATION
-10-
STEPS:
PC
* Please don't open the Cover
Be sure both the TV and computer are Power off.
1.Connect VGA and audio cable
2.Connect power cord
3.Power on the TV, switch to PC mode
4.Power on the PC
This sequence is very important.
8
AV
Pr
Y
Pb
HDMIINPUT
VGAINPUT
RF INPUT
PC
AUDIOINPUT
YPbPr
INPUT AUDIO
INPUT
AC INPUT
100-240V~ 50/60Hz
L
R
Note: AV means VIDEO INPUT

-11-
PRESET MODE(recommended resolution is 1024*768@60Hz)
2
3
4
640*480
800*600
800*600
1024*768
60
56
60
60
31.47
35.156
37.88
48.36
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
INSTALLATION
PC
1

AV EQUIPMENT
VIDEO EQUIPMENT with COMPONENT
G
B
R
GBR
INSTALLATION
This TV provides one group of AV ,COMPONENT for convenient connection to VCR,DVD or
other video equipment. Please refer to the owners manual of the equipment to be connected
as well.
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game or stereo system, etc.....
can support these video fomats:480i,576i,480p,576p,720p,1080i.YPbPr
-12-
AV
Pr
Y
Pb
HDMI INPUT
VGA INPUT
RF INPUT
PC
AUDIO INPUT
YPbPr
INPUT AUDIO
INPUT
AC INPUT
100-240V~ 50/60Hz
L
R
HDMI
HDMI cable not included
To audio
outputs
VIDEO EQUIPMENT
Yellow (video)
White(audio L)
Red(audio R or Pr)
Y
W
R
R
W
Y
output
To video
Blue(Pb)
Green(Y)
B
G
YWR
Note: AV means VIDEO INPUT

Remark:
BATTERY INSTALLATION
Insert Batteries Into the Remote Control
1. Remove the battery cover.
2. Insert the 2 AAA 1.5V batteries making sure the polarity (+ or -) of the batteries matches the
polarity marks Inside the unit.
3. Mount the battery cover.
Replace with new batteries when the TV set begins to show the following symptoms:
Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control
Unit.
1) Alkaline Battery Recommended.
2) Remove batteries when they are exhausted or if the remote control is not to be used for a
long time.
-13-
123

-14-
REMOTE CONTROL
REMOTE CONTROL
ENTER
VOL-
123
456
7890
POWER MUTE
MENU
EXIT
SOURCE
TV DISPLAY
+
_
VOL
+
CH
_
S.M
P. M
RECALL
AUTO V-CHIPCC
TV AV HDMI
SLEEP
TV SOURCE
YPbPr
ASPECT
VGA
111
2
3
4
6
5
7
8
9
10
12
14
13
15
16
17
19
20
1:
To set the TV standby or on.
2:
To adjust sound level.
3:
To display TV menu.
4:
To move within the menu.
5:
Used to return to the previous menu or
exit menu.
6: :
For direct access to program. For
a 2 (3) digit program number,
The second (third) digit must be
entered before the dash disappears.
Channel number will be displayed
for a few seconds.
7:
Auto adjust in PC mode.
8:
Display caption during closed caption
9:
10:
SettimetoturnofftheTV
11:
To disable or enable the sound.
12:
To change picture aspect
13:
To switch sound mode.
program.
14:
To access the next or previous
Program.
Menu.
15: P
To switch picture mode.
16:
To display or exit TV input source
17:
Confirms selection.
18:
Displays/removes the program
Information
19:
To change TV SOURCE
[CABLE,AIR]
20
21
Enter parent ctrl
POWER
VOL+/-
MENU
CURSOR
EXIT
NUMBER KEY
AUTO
CC
SLEEP
MUTE
ASPECT
S.M
CH+/CH-
.M
SOURCE
ENTER
TV DISPLAY
TV SOURCE
V-CHIP
Direct key to change input Source.
RECALL
To access the previously viewed
18
21

OPERATION
-15-
Note:
1
2. Four picture modes: STANDARD,MOVIE,
VIVID,USER.
3.HUE is available in NTSC system only.
.Three color temperatures: NORMAL,
WARM,COOL.
2.SOUND MENU
Ô
USER
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
PICTURE MODE
MENU
SELECT EXIT
MOVE
PICTURE
COLOR TEMP
16 9
NORMAL
PICTURE
SCALE 16:9
MENU
EXIT
1. PICTURE MENU
The first item of the MENU is picture menu.
You can adjust picture here,such as contrast,
brightness,etc.press to move,press
To select.
The second item of the MENU is SOUND
MENU.You can adjust sound here.
Press to move,press to adjust.
SOUND MODE
BASS
TREBLE
BALANCE
USER
SOUND
MENU
EXIT
3.CHANNEL MENU
The third item of the MENU is channel menu
(Only in TV mode).You can complete
channel Search and setting here.
1.AUTO SCAN:Search all the channels
automatically.
2.ADD/ERASE:To skip the current channel
yesornot.
3.SOURCE:CABLE,AIR.
4.C.CAPTION:adjust c.c. Type.
5.PARENT CTRL: enter parent ctrl menu,
The default password is 6666.
4.FUNCTION MENU
The fourth item of the MENU is function
menu.You can adjust settings below.
1.SLEEP TIMER:adjust sleep time
2.DNR: noise reduction
3.MEMORY RECALL: Reset all the
Settings to default value.
AUTO SCAN
ADD/ERASE ADD
SOURCE CABLE
C.CAPITION
OFF
MENU
EXIT
PARENT CTRL
FUNCTION
SLEEP TIMER
DNR ON
MEMORY RECALL
MENU
EXIT
0
SELECT
MOVE
SELECT
MOVE
SELECT
MOVE
SELECT
MOVE

OPERATION
-16-
5.OSD MENU
The sixth item of the MENU is OSD
Menu.
You can adjust setting below .
1.PASSWORD:you can change the
current PARENT CTRL password.
2.V-CHIP, you can turn off or
On it .
3.TV-RATING,you can enter TV rating
Menu to adjust.
PARENTAL CTRL
Auto adjust in PC mode only.
6.PC MENU
This MENU is available in PC only.
You can adjust the PC effect and position.
V-CHIP
PASSWORD
OFF
ENGLISH RATING
FRANCE RATING
TV-RATING
MENU
EXIT
MOVIE RATING
PARENT CTRL
LANGUAGE ENGLISH
H-POSITION
V-POSITION
HALFTONE
OSD SIZE 1 TIMES
MENU
EXIT
OSD
DURATION
Ô
Ô
MENU
EXIT
H-POSITION
V-POSITION
CONTRAST
BRIGHTNESS
CLOCK
PHASE
PC
Ô
Ô
COLOR TEMP
SCALE
AUTO ADJUST
16:9
MENU
EXIT
PC
Use ENTER key to switch Block/ Unblock
feature.
Parental
Control
Rating Content
FV
(Fantasy
violence)
V
(Violence)
S
(Sexual
situation)
L
(Adult
language)
D
(Sexually
suggestive
dialog)
Suggested
age
TV-Y (All
children)
TV-Y7(Direct to
order children)
TV-G(General
audience)
TV-PG(Parental
Guidance
suggested)
TV-14(Parents
strongly
cautioned)
TV-MA(Mature
audience only)
X
X
X
X
X
X
X
X
X
X
X
X
Content
MPAA:switch the movie-rating control level: N/A,
G, PG, PG-13,R,NC-17,X.
Rating Description
Age
G General audiences, All Ages admitted
PG
Parental Guidance suggested. Some material may not be
Suitable for children.
PG-13 Parents strongly cautioned. Some material .may be
Inappropriate for children under 13.
R
NC-17
X
Restrict. Under 17 requires accompanying parent or adult
guardian(age varies in some jurisdictions)
No one 17 and under admitted.
X is an order rating that is unified with NC-17 but may be
encoded in the data of order movies.
MENU
EXIT
PARENT CTRL
ALLFVVS L D
NONE
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ENTER KEY: BLOCK / UNBLOCK
B
B
TV-Y
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
SELECT
MOVE
SELECT
MOVE
SELECT
MOVE
SELECT
MOVE
SELECT
MOVE

Picture Audio
Snow Noise antenna position, direction
or connection.
Inspection
Interfere Noise electronic equipment, car/
motorcycle, fluorescent light.
Normal Picture Mute
Volume(check whether the
mute function is on or sound
system are correct or not).
No picture Mute
power cord is not connected.
power switch is not opened.
Press standby key on the remote
control to trying.
No color Normal audio Color control.
Scramble Normal audio
or weak
Search the channel again.
No color Noise Audio system.
Normal audio
antenna position, direction
or connection.
Trouble shooting
Trouble phenomenon
Ghost
-17-

4 Screws
Wall Mounting Holes Spacing and Location
Base Stand Disassemble Illustration
How to remove the stand from the TV
1.Use the screwdriver to remove the screws
from the screw location. 1.Remove the base stand from the
Main body.
-18-