Electus Distribution Dancing Santa User manual

1)
2) USB Charge Jack
3)
4) Microphone
5) Adjustable Arms
6) Dancing Legs
7) Speaker
8) TWS Support

This manual has been carefully checked, but does not rule out the
please feel free to contact with our customer service centre. Read
s carefully before use and use the original
su
use your hand or other means to force the device to prevent normal
Warning
THIS PRODUCT IS NOT A TOY AND IS NOT SUITABLE FOR CHILDREN
UNDER THE AGE OF 3.
-
-
to avoid damages.
-
- Do not use the speaker under di
apparatus.
- Do not try to disassemble, repair or modify the speaker yourself

USB charging input: 5V 500mA
2 hours
Output: 3W
Bandwidth: 70HZ-- 20KHZ
1K (85dB))
3.7V / 250mAh capacity
2 hours
Bluetooth version: V5.0
Up to 10 meters
TWS Support
1. Press and hold th release the
when the unit turns on.
2. The speaker light will
named “GT4300”.

3. Select “GT4300” to begin the pairing process. The indicator will
the pairing was successful.
Note: The speaker remembers the last connected device and will
to the last connected device when powered
on.
– requires two Santa speakers
the light blue appears and the device
emits a “beep” sound. The speakers will start blinking with a light
with a beep sound.
pair one of the speakers.

Play Music / Answer Calls
When the speaker is connected to the Bluetooth device, press the
The system will begin playing music. To pause the music, tap the
Answer incoming calls
Press again to end the
call.
Redial phone number
When the speaker is switched on, press the [[>II ] key shortly twice
-dial the last phone number.
2. When the pow

Charging
Use the USB cable to connect to the speaker. A red light will
indicate the device is charging. When the red light goes out is fully
charged.
fully charged.
Device won’t turn on.
Please charge the speaker & try again.
Can’t be charged
Please try to change the USB charging cable
Fully charge the speaker, and then re-pair to your Bluetooth device.