Haztec 8-7050-SC User manual

Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: [phone] ∙ inf[email protected] ∙ www.haztec.uk
8-7050-SC 50W Speaker
M076 Issue 1.1 Created by: Technical - 1 - January 2021
Thank you for purchasing this Haztec product. Before proceeding with installation, it is essential
to read and understand this instruction booklet.
Warning!
This product must be installed by persons competent in vehicle electrical installations
Care should be taken to ensure that water ingress cannot occur through mounting or
wiring holes
Regularly inspect and check the product to confirm correct operation
Use only a damp cloth to clean this product
DO NOT direct a high-pressure water jet at this product
DO NOT allow solvents, fuels, acetone-based cleaners etc. to contact this product
Basic Specifications:
Maximum output:
50 Watts
Impedance:
4 Ohms
Height:
107mm
Width:
130mm
Depth:
90mm
Compact oil filled speaker
High output
Acoustic cowl
Powder coat finish
Reversible mounting bracket

Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: [phone] ∙ inf[email protected] ∙ www.haztec.uk
8-7050-SC 50W Speaker
M076 Issue 1.1 Created by: Technical - 2 - January 2021
Installation Instructions:
Determine a suitable location to mount the speaker. This must be a solid part of the
vehicle capable of supporting the weight of the speaker
Remove the speaker bracket and use it as a template to mark the mounting holes
Drill the holes a suitable size to accept the mounting bolts
An appropriate customer supplied sealant should be used to prevent water ingress
Attach the bracket securely to the vehicle then mount the speaker and attach the output
wires from the amplifier
Refer to the siren amplifier user instructions for speaker connectivity
It is important to note that the speaker must be mounted so that the driver water drain
hole is positioned facing downwards