Elemental Solutions EHP204 User manual

rev:52013
Thank you for choosing Elemental Solutions! Your satisfaction and success are
important to us. For best results, carefully read the following
instructions before using your Elemental H2O Pump.
Features of your Elemental H2O Pump
•Submersibleorinlineoperation(EHP204andEHP216submersibleonly)
•Adjustableow
•Durableceramicshaft
•Superior-quality,corrosion-resistanthousing
•Waterproofmotorcasing
•1-yearwarranty
EHP216
Max.Output:171gph
Max.Lift:4.75’
CordLength:6’
InputVoltage:120V
Frequency:60Hz
Wattage:9.5W
Pressure:2.04psi
Included Fitting
Multi-step1/2” & 3/4” Barb
x 1/2” Thread
EHP204
Max.Output:97gph
Max.Lift:2.45’
CordLength:6’
InputVoltage:120V
Frequency:60Hz
Wattage:5W
Pressure:1.05psi
Fixed 1/2” fitting included Included Fittings
1/2” Barb x 1/2” Thread
(2)3/4” Barb x 1/2” Thread
EHP240
Max.Output:291gph
Max.Lift:5.9’
CordLength:10’
InputVoltage:120V
Frequency:60Hz
Wattage:16W
Pressure:2.53psi
Included Fittings
1/2” Barb x 1/2” Thread
(2)3/4” Barb x 1/2” Thread
EHP246
Max.Output:370gph
Max.Lift:7.54’
CordLength:10’
InputVoltage:120V
Frequency:60Hz
Wattage:24W
Pressure:3.24psi
EHP252
Max.Output:529gph
Max.Lift:7.9’
CordLength:10’
InputVoltage:120V
Frequency:60Hz
Wattage:33W
Pressure:3.39psi
Included Fittings
1/2” Barb x 1/2” Thread
3/4” Barb x 1/2” Thread
1”Barbx5/8” Thread
EHP262
Max.Output:793gph
Max.Lift:9.18’
CordLength:10’
InputVoltage:120V
Frequency:60Hz
Wattage:58W
Pressure:3.94psi
Included Fittings
3/4” barb x 1/2” thread
1”barbx1/2” thread
1”barbx5/8” thread
EHP272
Max.Output:1110gph
Max.Lift:12.13’
CordLength:10’
InputVoltage:120V
Frequency:60Hz
Wattage:92W
Pressure:5.21psi
Included Fittings
3/4” Barb x 5/8” Thread
1”Barbx5/8” Thread
1”Barbx3/4” Thread
E300489
50XJ

•Readallinstructionscarefullybeforeoperatingtheunit.
•Ensurethepowersourcemeetstherequirementslistedonthespecicationlabel.
•Donotusetheunitifthepowercordorplugbecomesdamaged.
•Iftheunitisincontactwithwater,donottouchthewaterwithoutunpluggingtheunit.
•Formadriploopwiththepowercordbyensuringpartofthecordisalwayslowerthantheoutlet,which
will prevent water from running down the cord to the plug and outlet. If the plug or outlet does become
wet, disconnect the fuse or circuit breaker supplying power to the outlet before touching the plug.
•Donotpickuptheunitusingthepowercord.
•Donotoperatetheunitdry.
•Donotusewithwaterhotterthan104°Forwithanycombustibleliquid.
•Donotoperatetheunitattemperatureslowerthan46°F.
•Ifconnectedtubingbecomesclogged,turnofftheunitimmediatelytopreventthemotor
from overloading.
•Disconnecttheunitfrompowerbeforecleaningitorifitisnotinuseforaprolongedperiodoftime.
•Donotattempttorepairtheunit.
Installation
1.Attachtubingtotheinletand/oroutletttingsasneeded.
2.Adjustwaterowusingthewaterowadjustmentknob.Forsubmersible-onlyunits,usethebuttonon 
top of the unit.
3.Mounttheunitonaat,stablesurfaceusingthesuctioncups.
4.Plugtheunitintoa120Voutlet.
Maintenance and Storage
•Regularlycleantheimpellerassemblytomaintainoptimalperformance.Pulloffthefrontcoverofthe 
 unit.Twisttheimpellercovercounterclockwisetoremove.Rinsedebrisfromtheimpellerandreassemble
the unit.
•Regularlycleanthelterventsonthefrontoftheunitandthelterlocatedbehindthefrontcover.
•Removeallwaterfrominsidetheunit,cleanitthoroughlyandallowittodrybeforestoringit.
Troubleshooting
The unit isn’t operating.
Ensure the unit is plugged in, the power source is turned on, and the impeller is free of debris.
The pump motor turns on and off but fails to pump water.
Ensuretheunitisconnectedtoapowersourcewiththecorrectvoltageandfrequency.Ensuretheinlet
and outlet fittings are free of debris. Ensure the water intake is fully submerged.
The unit is operating, but the water flow is sluggish or nonexistent.
Ensure the water intake is fully submerged. The tubing may need to be shortened or cleared of debris. If
the pump is operating inline, there may be air in the impeller chamber, which can be removed by
submerging the unit and turning it on and off several times.
Warning

7854 North State Road 37
Bloomington, IN 47404
Phone: [phone]
Email: [email protected]
Sunleaves Garden Products
Limited 1-Year Warranty Terms
Sunleaves Garden Products warrants this product to the original purchaser to be free of defective materials and
workmanship under normal use and service for 1 year from the original date of purchase. Sunleaves Garden Products,
at its option, will repair or replace components of this product if they are found to be defective in material or workmanship
within the warranty period. If Sunleaves, at its sole discretion, determines that the components are defective in material or
workmanship, then Sunleaves, at its option, will either repair or replace the components, provided that (1) a copy of the
original proof of purchase for this product by the original purchaser is delivered to Sunleaves; (2) the components have
not been tampered with, disassembled, repaired by unauthorized persons or altered; and (3) the components have not
been damaged as a result of commercial use, lack of reasonable and proper maintenance, abusive or unreasonable
use, or supplemental damage. In no event shall the cost of repair or replacement exceed the original purchase price.
SUNLEAVES SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE, INCLUDING WITHOUT LIMITATION DAMAGE OR INJURY CAUSED TO OTHER PRODUCTS, MACHINERY,
BUILDINGS OR PROPERTY; LOSS OF PROFITS, TIME OR PRODUCT; OR INCONVENIENCE. SUNLEAVES
FURTHER DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
Elemental H2O Pump Warranty Is Void If:
• NOTACCOMPANIEDBYTHEORIGINALPROOFOFPURCHASE.
• ELEMENTALH2O PUMP HAS BEEN USED IN A NONSTANDARD WAY, INCLUDING GENERAL MISUSE AND OUTDOOR USE.
• ELEMENTALH2O PUMP HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, IMPROPER INSTALLATION, ALTERATION, OR FIRE,
FLOOD OR OTHER NATURAL DISASTER.
Don’t forget to include the following items if you are returning your Elemental H2O Pump to the place of purchase:
•Legiblecopyofyourproperlydatedsalesreceipt
•Thiscompletedform
Name: ................................................................................................
Address: ..............................................................................................
Phone #: ..............................................................................................
Email Address: .........................................................................................
RMA #: ...............................................................................................
Explain the problem: ....................................................................................
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Elemental Solutions 1-Year Limited Warranty
All Elemental H2O Pumps are protected against manufacturer defect by a limited 1-year manufacturer’s warranty.
rev:52013
If the retailer is unable to resolve the problem:
1. Call our toll-free number at 888-464-9676 or email
[email protected] to receive warranty information
and your RMA number if the product is being returned.
2. In the unlikely event you must return the defective
product to Sunleaves, carefully package the problem product.
3. Complete the form below and enclose it with your shipment
along with a legible copy of your properly dated sales
receipt. You must write your RMA number on the outside of
the package. Because Sunleaves is not responsible for
products damaged in shipping, we recommend insuring
your package.
Sunleaves Product Warranty Claims
To obtain warranty service in the unlikely event that your product fails to operate, return the product to the place of purchase. Often the
retailerwillbeabletoexaminetheproductincloserdetail,determinetheproblemandevenxtheproductonsite.