Eliet Super Prof User manual

Super Prof
MANUAL

2
English
This booklet provides information about the actual use and maintenance of
the machine. Read it carefully and keep it in a safe place.
Please also keep your purchasing invoice or receipt together with this booklet.
Register your purchase online at www.eliet.eu
© ELIET
Copyright 2015 ELIET. All rights reserved. All textual material, drawings, illustrations, diagrams, graphs, etc., included in this ELIET
booklet are protected by copyright and also by other intellectual property rights. None of this information may be copied for
commercial purposes or distribution and/or changed or reposted for other purposes. The copyright on the content included in
this ELIET manual remains the exclusive property of its respective owners.
2

3
English
1. Introduction
1.1 Carefully read this user manual
ELIET machines are designed for safe and reliable use; this requires their operation in
accordance with the instructions provided. Carefully read these operating instructions before
using the machine. Failure to do so may result in personal injury or damage to the equipment.
1.2 Identification data – ELIET Super Prof
Write the identification data relating to your machine in the boxed areas:
Article number: MA
Serial number:
Year of Manufacture::
Purchase date :
2. Warranty
2.1 Registration of your machine
In order to be able to make a warranty claim, you will need to register your machine online within
one month after purchase: www.eliet.eu / www.elietmachines.com
European customers : ELIET EUROPE NV US customers : ELIET USA Inc.
Diesveldstraat 2 3361 Stafford street - USA
8553 Otegem - Belgium Pittsburgh, PA 15204 - USA
T([phone] - F([phone] T412 367 5185 - F412 774 1970
www.eliet.eu www.elietusa.com
Read the warranty conditions “16.5 Warranty-conditions” on page 82

4
English
3. Welcome
Welcome to the family of ELIET customers.
We would like to thank you for the confidence that you have placed in ELIET and we are convin-
ced that you have purchased the very best machine. The operating life of your ELIET machine
depends to a great extent on how you care for your machine. This user manual and the engine
manual provided will assist you in this respect. If you follow the instructions and suggestions in
these manuals, your ELIET machine will operate for a very long time in optimal condition.
Read this instruction manual carefully before operating this machine. This will prevent you from
operating the device incorrectly.
For your own safety, take into account the safety instructions stated in the relevant chapter. Even
if you are thoroughly familiar with operating such equipment, it is still advisable to read these
pages carefully.
At ELIET all our machines and devices are subjected to a policy of continuous change and there-
fore, the specification of your machine may differ slightly in terms of shape, technology and ac-
cessories. The descriptions and technical data in this manual are accurate at the time of printing.
Certain illustrations and descriptions may not be applicable to your specific machine, but instead
relate to a different version of the machine. In turn, we trust that you will understand that the
texts and illustrations in this manual cannot lead to any claims.
If you still have any questions after you have read this manual, we request you to contact your
ELIET dealer.
ELIET AT YOUR SERVICE
European customers GMT +1 : from 08:00 to 18:00 HRS
Zwevegemstraat 136 Phone : (+32) (0)56 77 70 88
B-8553 Otegem Fax : (+32) (0)56 77 52 13
Belgium Email: [e-mail]
4

5
English
Warning
OPERATING OUTDOOR POWER EQUIPMENT
Under the laws of several countries or states you are not permitted to operate an internal com-
bustion engine using hydrocarbon fuels on any forest covered, brush covered or grass covered
land or on land covered with grain hay or other flammable agricultural crop, without an
engine spark arrester in continuous effective working order.
The engine on your power equipment, like most outdoor power equipment, is an internal combus-
tion engine that burns gasoline, a hydrocarbon fuel.
Therefore, your power equipment must be equipped with a spark arrester muffler in continuous
effective working order. The spark arrester must be attached to the engine exhaust system in
such a manner that flames or heat from the system will not ignite flammable material.
Failure of the owner/operator of the equipment to comply with this regulation is a misdemeanour
under certain law (e.g. Californian Law), and may also be a violation of other state and or federal
regulations, laws, ordinances, or codes. Contact your local fire marshal or forest service for speci-
fic information about what regulations apply in your area.
The standard muffler installed on the ELIET engines is not equipped with a spark arrester. One
must be added before use if this machine is intended to be used in an area where a spark arres-
ter is required by law. Contact the local authorities if these laws apply to you. See your authori-
zed engine dealer for spark arrester options.
ELIET AT YOUR SERVICE
US Customers GMT +6 : 8 AM till 6 PM
Phone : [phone]
Fax : [phone]
[e-mail]

6
English
4. Table of Contents
1. Introduction . .............................................................3
1.1 Carefully read this user manual . ..............................................3
1.2 Identification data – ELIET Super Prof . ........................................3
2. Warranty . ...............................................................3
2.1 Registration of your machine . .....................................................3
3. Welcome . ................................................................4
4. Table of Contents .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Safety symbols . ..........................................................9
5.1 For your information . ............................................................9
5.2 Caution . .......................................................................9
5.3 Warning . .......................................................................9
6. Main parts . .............................................................10
7. Safety regulations . .......................................................12
7.1 Safety messages : . ..............................................................12
7.2 Safety provisions . ..............................................................16
7.3 Safety regulations . .............................................................18
7.3.1 General safety precautions . ..................................................18
7.3.2 Careful and security-conscious use . ..........................................18
7.3.3 Responsibilities of the Operator . .............................................19
7.3.4 Personal Protective Equipment (PPE) . ....................................... 20
7.3.5 Danger zone . ............................................................. 20
7.3.6 Periodic maintenance . ..................................................... 20
7.3.7 Respect the environment . ...................................................21
8. Dealer’s duties ...........................................................22
9. Operating instructions . ...................................................23
9.1 Preliminary checks . .............................................................23
9.2 Filling up with petrol . ...........................................................24
9.3 Preparing the work area ........................................................ 25
9.4 Starting the Petrol Engine ...................................................... 25
9.5 Moving the machine . ...........................................................27
9.6 Operating the machine ......................................................... 29
9.6.1 Before starting work . ...................................................... 29
9.6.2 Turning and positioning the blowchute and deflector-flap . ..................... 30
9.6.3 During the work . .......................................................... 30
9.7 Cleaning the machine . ......................................................... 36
10. Transporting the machine . ................................................38
11. Maintenance tasks described in detail . ......................................40
11.1 General .......................................................................40
11.2 General interventions . ..........................................................41
11.2.1 Removing the belt guard .....................................................41
11.2.2 Removing the chain guard .................................................. 42
11.2.3 Disconnecting the battery . ................................................. 42

7
English
11.2.4 Opening the AxeleroTM chamber ............................................ 42
11.2.5 Opening the shredding chamber . ........................................... 43
11.2.6 Putting the blow chute in working or transport position . ....................... 46
11.3 Engine maintenance . .......................................................... 47
11.3.1 Checking the oil level in the engine crankcase + refilling . ....................... 47
11.3.2 Engine oil change (Engine Oil) . ............................................. 48
11.3.3 Changing the oil filter (Oil filter) . ............................................ 48
11.3.4 Cleaning the air filter (Clean air filter) ........................................ 49
11.3.5 Changing the air filter . .................................................... 49
11.3.6 Changing the engine fuel filter (Oil filter) . .................................... 50
11.3.7 Changing the hydraulic oil . ................................................. 50
11.3.8 Changing the hydraulic oil filter (Hydraul. filter) . ...............................51
11.4 Machine maintenance . ........................................................ 52
11.4.1 Checking the blades ........................................................ 52
11.4.2 Sharpening the blades . .....................................................53
11.4.3 Reversing and renewing the shredding knives (Turn Knives) . ................... 55
11.4.4 Checking the drive belt for correct tension (Chk Belt Tens.) ..................... 60
11.4.5 Tightening the V-belt (Tighten belt) . .........................................61
11.4.6 Changing the belts (Replace Belts) . ......................................... 62
11.4.7 Checking the tension of the drive chain for the feed roller . ..................... 63
11.4.8 Checking and adjusting the tracks for correct tension (Cross Country model) ..... 63
11.4.9 General lubrication (Lubrication) . ........................................... 64
11.5 Maintenance schedule . ........................................................ 68
11.5.1 Special maintenance . ...................................................... 69
11.5.2 Daily maintenance ..........................................................70
11.5.3 Maintenance after 5 hours . .................................................70
11.5.4 Maintenance after 10 hours ..................................................70
11.5.5 Maintenance after 25 hours . ................................................71
11.5.6 Maintenance after 50 hours . ................................................71
11.5.7 Maintenance after 100 hours (or six-monthly) . .................................71
111.5.8 Maintenance after 200 hours (or annually) . ..................................72
12. Winterizing the machine . .................................................73
13. Options . ...............................................................74
13.1 Sieve screening . ...............................................................74
14. Equipment specifications . ................................................75
15. EC Declaration of Conformity . .............................................76
16. Appendix ...............................................................77
16.1 Technical specifications of the lubricants and fuel . .................................77
16.2 List of torques .................................................................78
16.3 Troubleshooting - resolving problems . ...........................................79
16.3.1 F00: Oil Press. Low . ........................................................79
16.3.2 F01: Safety Cover . .........................................................79
16.3.3 F02: Oil Pr. sensor . ........................................................79
16.3.4 F03: Short Clutch . ........................................................ 80
16.3.5 F04: Wiring Clutch . .......................................................80

8
English
16.3.6 F05: Short FEED FWD . ....................................................80
16.3.7 F06: Wiring FEED FWD . ...................................................80
16.3.8 F07: Short FEED REV .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
16.3.9 F08: Wiring FEED REV .....................................................80
16.3.10 F09: Short THROTTLE . ...................................................80
16.3.11 F10: Wiring THROTTLE . ...................................................80
16.4 Dashboard warnings . ..........................................................81
16.4.1 W00: Safety Bar . ..........................................................81
16.4.2 W01: AntiBlock Motor . .....................................................81
16.4.3 W02: Speed Up Engine . ....................................................81
16.4.4 W03: Activate Blades . .....................................................81
16.4.5 W04: Load Too High . ......................................................81
16.4.6 W05: Start failed . .........................................................81
16.5 Warranty-conditions . ......................................................... 82

9
English
5. Safety symbols
Certain symbols in this manual are used to provide additional information and to draw your
attention to potential risks.
5.1 For your information
For your information
This symbol is used to draw your attention to specific information and/or
actions, or to denote where you can find additional information relating to the
subject.
5.2 Caution
Caution :
This notice identifies safe usage habits. This is done to prevent incorrect actions
that can result in personal injury or damage to the machine.
5.3 Warning
Warning :
This notice is used to warn you about extreme danger that you must be aware
of in these specific circumstances. Thus remain alert, in order to ensure your
own safety.

10
English
6. Main parts
To fully understand the content of this operator’s manual, you need to be fully conversant
with the terminology used for[www] the descriptions. In this chapter you can find a set of
parts identified by name. It is a good idea to take time to study the machine beforehand for an
improved understanding of the descriptions provided in this user manual.
1) Safety-stop-bracket
2) Wheel drive control / steering wheel
3) Petrol tank
4) Hydraulic oil tank
5) Blow chute
6) Loading hopper
7) AxeleroTM
8) Deflector cap
9) Maintenance hatch
10) Fuel tank filler cap
11) Controls feed roller
1) Ignition Key
2) LCD controle screen
3) Throttle
4) Choke
5) Action button
6) Controlbuttons Display
7) Eco Eye signage (optional)