elink R14 User manual



Brief introduction
Many thanks for purchasing Media Converter Chassis! R14 Media Converter
Chassis is a telecommunication-level product, designed as supporting
equipment for communication engineering, a highly integrated central
equipment ith the length of 19 inch and height of 2U. Maximum 14 sets of
10M, 100M, 10/100M, 1000M multimode, single mode media converters can be
installed in one chassis under uniform po er supply. This not only reduces the
number of tie ires and simplifies the structure, but also facilitates easy
management and maintenance.
Purchasing guide for media converter chassis
Model Specifications
R14-1-A 14 slots, sing po er supply, AC220V 19’’2U
R14-2-A 14 slots, double po er supply, AC220V 19’’2U
R14-1-D 14 slots, sing po er supply, DC 220V 19’’2U
R14-2-D 14 slots, double po er supply, DC220V 19’’2U


Packing list
Please check the follo ing items in the package before installing the media
converter.
Media Converter Chassis 1set
Po er line 1pcs
User manual 1copy
Please contact the dealer immediately for any loss or damage to the above
items.


Feature
1. 14 slots standard 19Inch2U casing can be installed in the cabinet of
equipment room for uniform management and maintenance.
2. Dual fans for air exhaust, excellent thermal diffusivity.
3. Supports plug-and-play of optical transceiver.
4. Well shielded po er supply prevents electromagnetic signal caused by
po er supply from intervening the normal operation of module.
5. Optional s itching po er supply supports stable and long time operation,
provides overvoltage and over current protection, ith ripple and noise less
than 50mV.


Installation
1. Put this set into the standard cabinet. According to your needs, insert Fast
Ethernet Media Converter ith outside po er supply in the slots. And
remanent empty slots please cover ith front panel.
2. Insert one end of the electric po er cord in the po er behind this chassis,
insert another end in 220V exchange po er of (connect DC48V to
DC48V).
3. Open the s itch on the back of the chassis (double s itches need to open
the both s itches), the po er indicator lamp on the back plate is bright at
this moment, the chassis begins to ork

4. Check the POWER indicator lamp of Fast Ethernet Media Converter insert
the chassis, If light on to sho the chassis have supply po er normally,
other ise need to check the po er of the chassis.
5. Carry on operation according to the user manual of the Fast Ethernet Media
Converter.


Technical parameters:
1. Amount of slots: 14 slots
2. Po er supply parameter: outside: 5V DC 1A
built-in: AC100-250V
50-60HZ
3. Environmental temperature:
Working temperature range: 0 ℃ ～ 50 ℃
Storage temperature range: -20 ℃ ～ 65 ℃
4. Relative humidity: 5% ～ 90%
5. Dimensions: 90mm(H)x485mm(W)x230mm (D)
19Inch 2U height
Media Converter Chassis/Rack
14 slots
User manual
(Do not use until you read this manual carefully)