Intel SC5400LX User manual

Intel® Server Chassis SC5400 User’s
Guide
A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/
Products
Intel Order Number D38435-005

ii Intel® Server Chassis SC5400 User’s Guide
Disclaimer
Information in this document is provided in connection with Intel® products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,
without notice.
Intel server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. Intel
Corporation can not be held responsible if components fail or the server board does not operate correctly when used
outside any of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2006 - 2007, Intel Corporation. All Rights Reserved

iii Intel® Server Chassis SC5400 User’s Guide
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the
instructions. See also Intel Server Boards and Server Chassis Safety Information on the
Intel®Server Deployment Toolkit CD and/or at http://support.intel.com/support/
motherboards/server/sb/cs-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor
Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu
Intel-Serverplatinen und Servergehäusen auf der Intel®Server Deployment Toolkit CD
oder unter http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce
document avant de suivre toute instruction. Consultez Intel Server Boards and Server
Chassis Safety Information sur le Intel®Server Deployment Toolkit CD ou bien rendez-
vous sur le site http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar
cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety
Information en el Intel®Server Deployment Toolkit CD y/o en http://support.intel.com/
support/motherboards/server/sb/cs-010770.htm.

iv Intel® Server Chassis SC5400 User’s Guide
Warnings
Heed safety instructions: Before working with your server product, whether you are
using this guide or any other resource as a reference, pay close attention to the safety
instructions. You must adhere to the assembly instructions in this guide to ensure and
maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of the product and
will most likely result in non-compliance with product regulations in the region(s) in
which the product is sold.
System power on/off: The power button DOES NOT turn off the system AC power. To
remove power from system, you must unplug the AC power cord from the wall outlet.
Make sure the AC power cord is unplugged before you open the chassis, add, or remove
any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be
present on power, telephone, and communication cables. Turn off the server and
disconnect the power cord, telecommunications systems, networks, and modems attached
to the server before opening it. Otherwise, personal injury or equipment damage can
result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,
boards, and other parts. We recommend that you perform all procedures in this chapter
only at an ESD workstation. If one is not available, provide some ESD protection by
wearing an anti-static wrist strap attached to chassis ground any unpainted metal surface
on your server when handling parts.
ESD and handling boards: Always handle boards carefully. They can be extremely
sensitive to ESD. Hold boards only by their edges. After removing a board from its
protective wrapper or from the server, place the board component side up on a grounded,
static free surface. Use a conductive foam pad if available but not the board wrapper. Do
not slide board over any surface.
重要安全指导

Intel® Server Chassis SC5400 User’s Guide v
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips
over two jumper pins. Some jumpers have a small tab on top that you can grip with your
fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a
tab, take care when using needle nosed pliers to remove or install a jumper; grip the
narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides
can damage the contacts inside the jumper, causing intermittent problems with the
function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or
other tool you use to remove a jumper, or you may bend or break the pins on the board.

vi Intel® Server Chassis SC5400 User’s Guide

vii
Preface
About this Manual
Thank you for purchasing and using the Intel® Server Chassis SC5400.
This manual is written for system technicians who are responsible for troubleshooting,
upgrading, and repairing this server chassis. This document provides a brief overview of
the features of the chassis, a list of accessories or other components you may need,
troubleshooting information, and instructions on how to add and replace components on
the Intel® Server Chassis SC5400. For the latest version of this manual, see http://
support.intel.com/support/motherboards/server/chassis/SC5400/.
Manual Organization
Chapter 1 provides a brief overview of the Intel® Server Chassis SC5400. In this chapter,
you will find a list of the server chassis features, photos of the product, and product
diagrams to help you identify components and their locations.
Chapter 2 provides instructions on adding and replacing components. Use this chapter for
step-by-step instructions and diagrams for installing or replacing components such as the
fans, power supply, drives, and other components.
Chapter 3 provides technical reference information on cable routing, power supply
specifications, and system environment requirements.
At the back of this document, you will find appendices on safety, regulatory, "getting
help", and warranty information.

viii Intel® Server Chassis SC5400 User’s Guide
Product Contents, Order Options, and
Accessories
This server chassis is compatible with the following Intel®Server Boards:
•Intel®Server Board S5000PSL
•Intel®Server Board S5000XVN
Your Intel® Server Chassis SC5400 ships with the following items:
•670W or 830W power supply, installed in the chassis
•A box of hardware components, referred to below as the "chassis hardware box"
•Fan cables, installed in the Intel® Server Chassis SC5400 with product code
SC5400LX or SC5400LXi
•Chassis intrusion switch, installed in the chassis
•Attention document, in the chassis product box
•Intel® Server Chassis SC5400 Quick Start User's Guide, in the chassis hardware box
•Six 32-6mm flat screws for installing drive component, in the chassis hardware box
•Seven screws for mounting the server board into the chassis, in the chassis hardware
box
•USB cable, in the chassis hardware box
•COM2 cable, in the hardware box
In addition, you may need or want to purchase one or more of the following accessory
items for your server: Processor, memory DIMMs, hard drive, floppy drive, CD-ROM or
DVD-ROM drive, RAID controller, operating system.
For information about which accessories, memory, processors, and third-party hardware
have been tested and can be used with your board, and for ordering information for Intel
products, see http://support.intel.com/support/motherboards/server/chassis/SC5400/
compat.htm.

Intel® Server Chassis SC5400 User’s Guide ix
Additional Information and Software
If you need more information about this product or information about the accessories that
can be used with this server chassis, use the following resources. These files are available
at http://support.intel.com/support/motherboards/server/chassis/SC5400/.
Unless otherwise indicated in the table below, once on this Web page, type the document
or software name in the search field at the left side of the screen and select the option to
search "This Product."
For this information or
software Use this Document or Software
For in-depth technical
information about this
product, including BIOS
settings and chipset
information
IIntel® Server Chassis SC5400 Technical Product Specification
If you just received this
product and need to install
it
Intel® Server Chassis SC5400 Quick Start User's Guide in the
product box
For virtual system tours
and interactive repair
information
A link to the SMaRT Tool is available under "Other Resources" at the
right side of the screen at:
http://support.intel.com/support/motherboards/server/chassis/
SC5400/
Accessories or other Intel
server products Spares and Configuration Guide
Hardware (peripheral
boards, adapter cards) and
operating systems that
have been tested with this
product
Tested Hardware Operating Systems List
For software to manage
your Intel®server Intel®System Management Software
For diagnostics test
software Diagnostics

xIntel® Server Chassis SC5400 User’s Guide