Elite Gourmet EDB-302BF User manual

ELECTRIC DOUBLE
BUFFET FLAT BURNER
INSTRUCTION MANUAL
Before operating your new appliance, please read all instructions carefully and keep for
future reference.
Questions? Elite's customer service team is ready to help.
Call us toll-free at 800-365-6133 ext. 120/105.
For more Elite products, visit us at www.maxi-matic.com.
MODEL: EDB-302BF/EDB-302F

2 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
IMPORTANT SAFEGUARDS
The Elite Brand takes consumer safety very seriously. Products are designed and
manufactured with our valued consumers’ safety in mind. Additionally, we ask that
you exercise a level of caution when using any electrical appliance by following all
instructions and important safeguards.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE
REFERENCE
WARNING: When using electrical appliances, basic safety precautions should
always be followed as below:
1. Do not touch hot surfaces. Use
handles or knobs.
2. To protect against electrical shock,
do not immerse cord, plug or
appliance itself in water or any
other liquid.
3. It is not recommended that
children operate this appliance.
4. Unplug from outlet when not in
use and before cleaning. Allow to
cool before putting on or taking off
parts and before cleaning.
5. Do not operate any appliance with
a damaged cord or plug or after
the appliance malfunctions or has
been damaged in any manner.
Return the appliance to the nearest
authorized service facility for
examination, repair or adjustment.
6. The use of accessory attachments
not recommended by the
appliance manufacturer may cause
injuries.
7. Do not use outdoors.
8. Do not let cord hang over edge
of table or counter or touch hot
surfaces.
9. Do not place on or near a hot gas or
electric burner, or in a heated oven.
10. Always attach plug to appliance
rst, then plug cord into wall outlet.
To disconnect, turn any control to
OFF position, then remove plug
from wall outlet.
11. Oversized foods or metal utensils
must not be inserted in the
appliance as they may cause a re
or risk of electrical shock.
12. A re may occur if the appliance is
covered or touching ammable
material including curtains,
draperies, walls and the like when in
operation.
13. Do not clean with metal scouring
pads. Pieces can break off the pad
and touch electrical parts, involving
a risk of electrical shock.
14. Extreme caution should be
exercised when using containers
constructed of other material other
than metal or glass.
15. Do not place any of the following
materials on the unit: paper,
cardboard, plastic and the like.
16. CAUTION: DO NOT IMMERSE IN
WATER.
SAVE THESE INSTRUCTIONS.
THIS PRODUCT IS FOR
HOUSEHOLD USE ONLY.

3
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
SHORT CORD PURPOSE
POLARIZED PLUG
If the plug still does not t, contact a
qualied electrician. Never use the plug
with an extension cord unless the plug
can be fully inserted into the extension
cord. Do not alter the plug of the
product or any extension cord being
used with this product. Do not attempt
to defeat the safety purpose of the
polarized plug.
If this appliance is equipped with a
polarized plug (one blade is wider than
the other), please follow the below
instructions:
To reduce the risk of electrical shock,
this plug is intended to t into a
polarized outlet only one way. If you
are unable to t the plug into the
electrical outlet, try reversing the plug.
If an extension cord is used: (1) the
marked electrical rating of the extension
cord should be at least as great as the
electrical rating of the product; (2) the
extension cord should be arranged so
that it will not drape over the counter
top or tabletop where it can
unintentionally be pulled on or tripped
over by children or pets.
Note: A short power cord is provided
to reduce the risk of personal injury
resulting from becoming entangled in or
tripping over a long cord.
Longer power-supply cords or
extension cords are available and
may be used if care is exercised in
their use.

4 Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
PARTS IDENTIFICATION
A. Dual Indicator Light: The indicator lights illuminate when the unit is turned on.
B. Dual Heating Element: Two Iron die cast at heating elements.
C. Dual Temperature Control Knob: Heat settings including 1, 2, 3, 4, 5, and MAX.
BEFORE FIRST USE
1. Unpack contents. Remove any packaging material such as plastic, cardboard,
or Styrofoam.
2. Use a damp cloth to clean the exterior of the
base and heating elements.
CAUTION: NEVER immerse the base in water
or any other liquid.
3. The initial use of the appliance may produce
a slight smell and smoke. This is normal and
harmless and it comes from the burning of the
protective substance applied to the heating
elements during manufacturing. The smoke and
odor should go away with subsequent use of the appliance. It is also
recommended to run the unit for 15 minutes on the 1 setting to eliminate the
odor and smoke before using it for the rst time.

5
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
CAUTION:
NEVER touch the
heating elements
while the burner is in
operation. Doing so
will lead to serious
personal injury.
HOW TO USE
1. Before plugging in your
new burner, check to
see that the electric
circuit is not overloaded
with other appliances. This unit should always be operated
on a separate 120Volt AC outlet.
2. Be certain that your unit is set on a leveled, at, heat
resistant surface. Also, avoid
using pans that are unstable
and easily tipped.
3. Place pan on heating
element.
4. Turn the temperature
control knob to the desired
heat setting. The power indicator light of the switch will
glow indicating that the heating element is turned on and
heating will begin immediately.
5. When cooking is complete, turn the temperature control
knob back to the “OFF” position.
6. If the burner is not to be in use for a long period of time, it
is highly recommended to unplug the unit from the outlet.
This prevents any accidental burns or injury.
7. When all parts have thoroughly cooled, be sure to clean the
burner. Dry all parts thoroughly before storing or operating
the burner.
CLEANING & MAINTENANCE
1. Wipe off the base and heating
element with a damp soapy cloth.
2. Thoroughly clean and dry all parts.
3. DO NOT USE ANY ABRASIVE
SOAPS, DETERGENTS, OR
CLEANING MATERIALS TO
CLEAN THE BURNER.
4. Any other servicing not
recommended by the manufacturer may cause hazards
and should be performed by an authorized representative.
CAUTION:
NEVER immerse the
base in water or any
other liquid.
5