Emulex CN1000E User manual

DATASHEET ConnECTiviTy
Overview
The HP StorageWorks CN1000E Dual Port
Converged Network Adapter (CNA) is a single-
chip, low profile 10Gb/s Ethernet (10GbE) adapter
for HP ProLiant rack servers. The HP CN1000E
is based on the Emulex OneConnect™Universal
CNA (UCNA) platform that delivers industry-
leading performance with storage protocol
offload for iSCSI or Fibre Channel over Ethernet
(FCoE). The HP CN1000E fully supports network
convergence and Data Center Bridging (DCB)
standards for lossless Ethernet with FCoE.
The HP CN1000E complements HP’s Converged
Infrastructure architecture. This open architecture
uses industry standards to converge storage,
server, and network resources and provide
seamless interoperability with existing data center
core networks.
Optimized Network Connectivity
Lower cost
The HP CN1000E can save up to 30% on capital
expenses by reducing the number of adapter
cards, switch ports and cables needed to support
network and storage traffic.2
Lower power and cooling
The HP CN1000E can reduce the number of
adapter cards and switches, resulting in significant
savings for power and cooling.
Consolidation with the latest Intel Xeon CPUs
The HP CN1000E was designed to leverage the
new features of Xeon processors beginning with
the 5500 series, including MSI-X, QPI, PCI-Express
2.0, HTT and VT-d which all enable more I/O per
CPU with protocol hardware offload technology.
Key Features
One platform for network
and storage connection
n
Simplifies I/O hardware choices for IT managers
Multiple protocol offloads for
optimum server efficiency
niSCSI
nFCoE
nTCP/IP stateless offload
nTCP Offload Engine (TOE) support
Superior performance
nIndustry-leading performance approaching
1 million IOPS (I/Os per second)1
Energy-efficient design
nIndustry-leading performance per watt
nComplements data center “green” initiatives
Easy to deploy and manage
nIntegrated management with Emulex
OneCommand™Manager
Key Benefits
Optimized for convergence
nMaximizes I/O consolidation with
high-performance 10GbE ports
nOne network infrastructure reduces
capital expenses
nOne management console reduces
operating expenses
nLeverages existing IT investments
Enterprise-ready
nHardware parity, CRC, ECC and
other advanced error checking
nBacked by field-proven Emulex and HP
reliability and support
SIMPLIFIED
NETWORKING,
TRUSTED SAN
INTEROPERABILITY
AND INCREASED
BUSINESS
AGILITY
HP CN1000E Dual Port
Converged Network Adapter
HP Part Number AW520A
1IT Brand Pulse Unified Data Center Networking Test Report,
January 2010
2The Guide to Network Convergence Solutions, pages 26-28

©2010 Emulex, Inc. All rights reserved. This document refers to various companies and products by their trade names. In most,
if not all cases, their respective companies claim these designations as trademarks or registered trademarks. This information
is provided for reference only. Although this information is believed to be accurate and reliable at the time of publication, Emulex
assumes no responsibility for errors or omissions. Emulex reserves the right to make changes or corrections without notice.
This report is the property of Emulex and may not be duplicated without permission from the Company.
www.emulex.com
11-0556 · 11/10
World Headquarters 3333 Susan Street, Costa Mesa, CA 92626 [phone]
Wokingham, UK [phone] | Munich, Germany [phone]
Paris, France [phone] | Beijing, China [phone]
Tokyo, Japan [phone] | Bangalore, India [phone]
Connect with Emulex
twitter.com/emulex bit.ly/emulexlinks bit.ly/emulexfbfriendfeed.com/emulex
DATASHEET EmulEx
HP CN1000E Dual Port
Converged Network Adapter
Standards
· ANSI INCITS T11 FC-BB-5 2.0, FC-PI-2, FC-GS-4,
FC-TAPE, and FCP-3
· PCI Express base spec 2.0
· PCI Bus Power Management Interface, rev. 1.2
· Advanced Error Reporting (AER)
· IEEE 802.3ae (10GBASE Ethernet Ports)
· IEEE 802.1q (Virtual LANs)
· IEEE 802.3ad (Link Aggregation)
· IEEE 802.3x (Flow Control)
· IEEE 802.1p (Quality/Class of Service)
· IEEE 802.1Qaz (Enhanced Transmission Selection)
· IEEE 802.1Qaz (Data Center Bridging Capabilities
Exchange)
· IEEE 802.1Qbb (Priority-based Flow Control)
· IEEE 802.1ab (Link Layer Discovery Protocol)
Architecture
· Dual-channel, 10Gb/s Ethernet link speed
· PCIe Express 2.0 (x8, 5GT/s), MSI-X support
· Integrated data buffer and code space memory
FCoE Features
· Common driver for HP-branded FCoE CNA
and Fibre Channel HBAs
· N_Port ID Virtualization (NPIV)
· Support for FIP and FCoE Ether types
· Fabric Provided MAC Addressing (FPMA) support
· 1024 concurrent port logins (RPIs)
· 1024 active exchanges (XRIs) per port
Ethernet Features
· IPv4/IPv6 TCP, UDP checksum offload; Large Send
Offload (LSO); Large Receive Offload; Receive Side
Scaling (RSS); IPV4 TCP Chimney Offload
· VLAN insertion and extraction
· Jumbo frames up to 9000 Bytes (8000 Bytes with
FCoE)
· Preboot eXecution Environment (PXE) 2.0 network
boot support
· Interrupt coalescing
· Load balancing and failover support including
adapter fault tolerance (AFT), switch fault tolerance
(SFT), adaptive load balancing (ALB), teaming
support and IEEE 802.3ad
iSCSI Featutres
· Target discovery methods
· Authentication modes
· INT 13 Boot
SpECifiCATionS
Comprehensive OS Support
· Windows Server
· VMware ESX
· Red Hat Enterprise Linux
· Novel SUSE®Linux Enterprise Server
Physical Media
· Copper
- SFP+ Direct Attached Twin-Ax Copper interface)
- SFP+ active copper cables for HP B-series
FCoE switches
- SFP+ passive copper cables for HP C-series
FCoE switches
· Optical
- 10Gb SFP+ Ethernet Optical Modules (SR)
- 455883-B21 HP BLc 10Gb SR SFP+
Physical Dimensions
· Low profile shipped with standard bracket
(low-profile bracket available)
Environmental Requirements
· Operating temperature: 32º to 113ºF (0º to 45ºC)
· Storage temperature: -40º F to 158ºF (-40º to 73ºC)
· Relative humidity: 5% to 95% non-condensing
Agency Approvals
· Class 1 Laser Product per DHHS 21CFR (J)
and EN60825-1
· UL recognized to UL 60950-1
· CUR recognized to CSA22.2, No. 60950-1-07
· Bauart-certified to EN60950-1
· FCC Rules, Part 15, Class A
· ICES-003, Class A
· EMC Directive 2004/108/EEC (CE Mark)
- EN55022, Class A
- EN55024
· Australian EMC Framework (C-Tick Mark)
AS/NZS CISPR22, Class A
· VCCI (Japan), Class A
· KCC (Korea), Class A
· EU RoHS Compliant (Directive 2002/95/EC)
· China RoHS Compliant
Ordering Information
· HP Part Number AW520A
Simplified Management
OneCommand Manager application
The OneCommand™Manager application
provides centralized management of HP
CN1000E CNAs and HP-branded Emulex
LightPulse®HBAs throughout the data
center from a centralized management
console. The OneCommand Manager
application provides a graphical user
interface (GUI) and a scriptable command
line user interface (CLI) for optimum
administration efficiency.
Streamlined installation
Using AutoPilot Installer, a single
installation of drivers and applications
for Windows servers eliminates multiple
reboots and ensures that each component
is installed correctly and HP CN1000E
CNAs are ready to use.
Highest Performance and Reliability
Enterprise-ready
Leveraging ten generations of advanced,
field-proven HBA technology, the HP
CN1000E is based on the Emulex
OneConnect architecture and meets
the robust interoperability and reliability
requirements of corporate data centers.
Advanced error checking
End-to-end data protection with hardware
parity, CRC, ECC and other advanced
error checking and correcting ensure that
data is safe from corruption.