Photos and videos!
We’ve adapted this fun digital camera to make picture taking easy.
Activate your capability switch and the camera will take up to 20
pictures or 6MB worth of video clips. Has soft molded grips and a built-
in carry strap. Comes with removable base for mounting and a USB cord
and software for downloading your pictures and videos onto your
computer. Tripod sold separately. Camera size: 6"W x 4"H x 3"D; Base
size: 6¼"W x "H x 3½"D. Requires 4 AA Batteries. Camera weight:
lb. Base weight: ¼ lb.
Operation:
. The Kid’s Digital Camera requires 4 AA batteries (Not included). Use
alkaline batteries only (e.g. Duracell or Energizer brand). Do not use
rechargeable batteries or any other type of batteries because they
supply lower voltage and the unit will not perform properly. Never
mix old and new batteries together or different brands or types
together.
2. Battery installation: Make sure the camera is turned OFF. Locate
the battery covers on the bottom of the camera. Loosen the screws
using a screwdriver and remove the battery covers. Install 4 new
“AA” batteries.
3. Connect to any external capability switch (not included) via the input
jack cord. Kid’s Digital Camera is equipped with a /8" female mono
jack for use with external capability switches that have a /8" mono
plug. Make sure you have a tight connection. There should be no
gaps.
4. Actuate your capability switch and Kid’s Digital Camera will take a
photo or video clip depending on your setting. Kid’s Digital Camera
can also be used without the use of an external switch.
5. Removable base will fit on most photography tripods or any of our
mounting arms with the addition of our part No. 2022 /4"-20 STUD.
Please eference the original manufacture instructions for all of the
cameras functions and features and any additional troubleshooting
info.
Troubleshooting:
Problem: Camera does not work.
Action #1: Check all batteries for proper (+) & (-) battery polarity.
Action #2: Replace all batteries with fresh new batteries. Never mix
different brands or old and new batteries.
Action #3: Try your switch\ with another switch operated device in an
effort to rule out your switch as the source of the problem.
Care & Maintenance:
. Keep the camera clean by wiping it with a slightly damp cloth.
2. Keep the camera out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the camera is not in use for an extended
period of time. Please Note: To prevent data loss, copy all photos and
movies from Camera to a PC before removing batteries.
4. Do not drop the camera on a hard surface and do not expose it to
moisture or immerse it in water.
ev 1/21/14
