Eneo NXB-9 Series User manual

EN
User Manual
Camera junction box
NXB-9 Series
AK-6

Base installation
Camera installation
1. Assemble PG gland to mount bracket.(a)
2. Attach the camera to the mount bracket using the screws.(b)
3. Fix the camera cable using gasket gland.(b)
4. Drill the mounting location, using the template sheet.
5. Attach the junction box to the wall, using the mounting screws and plastic anchors.(c)
6. Attach the camera to the junction box using the hooks.(d)
7. Connect power and camera cable.(e)
8. Closing the installation box using the wrench bolts.(f)
Mount bracket
Gasket gland
Camera
Camera cable
Junction box
Anchor(x4)
Screw(x4)
PH 6 x 60mm (Tapping)
Mount bracket
Junction box Installation box
Installation box
Bolt(x4)
M5 x 15mm
* O-Ring
PG gland
* Caution : O-Ring position
(included in the PG gland)
a. b. c.
d. e. f.
2 : PH M5 x 14mm 3 : PH M5 x 14mm
4 : PH M3 x 14mm
5 : PH M6 x 12mm
6 : PH M5 x 14mm
A. B.
C.
D.
E.

Package contents
Specications
Carefully remove the contents from the box, and verify that nothing was damaged in shipment.
- Installation box
- Accessory kit
- Manual (Template sheet)
28
PT 3/4"
PT 3/4"
28
PT 3/4"
70 110.4
110.4
66
92
15
PH M6 x 12mm
Screw
PG gland
Mount bracket
L-Wrench
Gasket gland
Bolt
Junction box
PART NAME
3PH M5 x 14mm
3
M5
Silicone
AL
PG21
M5 x 15mm
AL
1
1
1
4
1
1
Q'ty DESCRIPTION
Item
1
2
3
PG gland PG161
4
5
6
7
8
9
10
Construction
Mount bracket
Weight (set+packing)
Junction box
PART NAME
895g(720+175) / 1.97lb(1.59+0.38)
Weight (set+packing)
Polyester power coat
Die cast and Aluminum
DESCRIPTION
Item
1
2
3
4
Screw PH M3 x 14mm4
11 Screw PH 6 x 60mm (Tapping)4
12 Anchor 4
Screw
Dimension drawing

Template sheet
PT 3/4"
6.2
cutting
cutting
0

eneo® is a registered trademark of
VIDEOR E. Hartig GmbH
Exclusive distribution through special-
ised trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8
63322 Rödermark/Germany
Tel. [phone] / 888-0
Fax [phone] / 888-100
www.videor.com
www.eneo-security.com
Technical changes reserved
© Copyright by VIDEOR E. Hartig
GmbH Version 07/2015