Energy Docking 330 User manual

User manual

20
ENGLISH
1. INTRODUCTION
≥Energy Sistem® thanks you for buying your new Energy™ Docking 330, we wish
you enjoy using it.
With this spectacular 2.1 Sound System, you will hear the music from iPod/
iPhone/iPad, USB, SD cards, MP3 player or from any other audio device. At
the same way you can enjoy playing your favourite videos stored in your iPod/
iPhone/iPad using its video output and connecting it to the TV.
We recommend you t oread this user manual in order to enjoy the product in a
safe way and with the best results.
2. CARE AND MAINTENANCE
≥Do not expose your Energy ™ Docking 330 to shock, dust, humidity or high
temperatures.
≥Do not use cleaners or scouring agents.
≥Keep the unit clean and dust with a soft, dry cloth.
≥Do not disassemble the device.
≥Keep your Energy ™ Docking 330 away from water or moisture, it can be harmful
to both speakers or amplifier device.
≥Switch off your Energy ™ Docking 330 when not in use.
3. TECHNICAL SPECIFICATIONS
≥Sound 2.1 with real power of 2x15W + 30W.
≥Wooden body .
≥LCD Display.
≥FM antenna.
≥Remote control.
≥AC / DC (110V ~ 240V / 50 ~ 60HZ) - 15V/4A
≥Connector 30pin original.
≥3.5mm line-in.
≥Speakers: 3"x 4 + 1 x 4.75''.
≥Frequency: 87.5 - 108MHz.

21
4. PACKAGE CONTENT
≥Energy™ Docking 330.
≥Remote Control.
≥User manual.
≥AC/DC adapter.
5. GENERAL OVERVIEW
≥Top Panel
7
8
9
10
1
2
3
4
6
5
1. Slot for remote control.
2. USB connector.
3. 30 pin iPod/iPhone/iPad connector.
4. VOL +.
5.
6.
7. VOL -
8. SET /
9. / FUNC.
10. SD card slot

22
ENGLISH
≥Front View
11. Display.
12. Speakers.
11
12

23
≥Remote Control
14
16
19
21
23
17
17
18
20
22
13
27
26
25
24
13. ON.
14. Sleep mode.
15. Mute.
16. MENU up.
17. SOURCE.
18. NEXT.
19. ENTER.
20.PLAY / PAUSE.
21. MENU down.
22. Volume control.
23. Bass control.
24. Treble control.
25. MEMORY.
26.PREVIOUS.
27. iPod/iPhone/iPad MENU.

24
ENGLISH
28.Subwoofer.
29.LINE IN jack.
30.RCA audio in.
31. Video output.
32. DC jack.
28
≥Rare view / Connections
6. BATTERy SAFETy
≥Please ensure batteries are disposed of safely.
≥Never dispose of batteries in a fire or with other household waste.
≥Check with your local authority for disposal regulations.
31
30
29
32

25
7. BATTERy INSTALLATION
Remove the battery cover from the remote control and put 1x3V Cr2015lithium
battery inside the compartment.
The following diagram shows the correct way to insert batteries.
8. ATTACHING THE BASE
1. Carefully, take the Energy™ Docking 330 body and base out of the packaging
2. Take the screws abd washers out.
3. Attach the base to the body aligning the three holes in the base with three holes
in the Energy™ Docking 330.
4. Screw the base into the body.
5. Stand the Energy™ Docking 330 upright on the floor.
Your Energy™ Docking 330 is ready for use.

26
ENGLISH
9. MAIN FEATURES
Enjoy all your favourite songs in your iPod/iPhone/iPad you just have to plug it on
the dock. Spectacular Hi-Fi sound; with FM Radio tuner, MP3 player from your USB
pen drive and memory cards. Aux. line-in to connect any audio device.
9.1. POWERING UP
Place the Energy™ Docking 330 on the desired place, connect the AC/CD adapter to
the wall power connection. Finally insert the cable into the supply socket.
9.2. SETTING CLOCK
After the Energy™ Docking 330 is plugged into a mains power, the display will show
the “0:00”. To set the current clock the unit have to be in standby mode.
≥Press MEM/TIME button, the digits for the display will blink.
≥Press PREVIOUS/NEXT button repeatedly until the correct hour is set, to set
the minutes press MEM/TIME again and use PREVIOUS/NEXT until the correct
minutes are set. Finally press MEM/TIME to confirm.
≥Also, you can connect your iPod/iPhone/iPad to the dock and the time will be
sync at the same time.
9.3. CHARGING yOUR IPOD/IPHONE/IPAD.
You can charge your iPod/iPhone/iPad using your Docking 330, you only have to
plug it to the dock.
9.4. SLEEP MODE
To program the sleep mode, you have to press the SLEEP mode on the RC and the
display will blink. Press the button until the display shows the minute you want
to set. The display will blink three times to confirm and the display returns to the
interface before. You can set 10 to 90 minutes.
If you want to cancel the sleep mode press to 00.