Enko KRB06 User manual
KRB06 TWIN BIN INSTALLATION GUIDE
BOTTOM MOUNTED TOP MOUNTED
REMOVAL OF COVER FOR CLEANING
(A)
Suggest 5mm gap between door and slider front
(B)
Use 4 wood screws through mounting holes in frame
(C)
To remove top, depress on one side at a time andlift.
If required we suggest that you use “Medium Kitchen Tidy Bags” with your purchase. To insert bags
correctly, lift bins and tuck excess bag down around the sides and drop bins back into base
KRB06D TWIN BIN DOOR MOUNTED INSTALLATION GUIDE
BOTTOM MOUNTED REMOVAL OF COVER FOR CLEANING
(A)
Suggest 5mm gap between door and slider front
(B)
Use 4 wood screws through mounting holes in frame
(C)
To remove top, depress on one side at a time andlift.
If required we suggest that you use “Medium Kitchen Tidy Bags” with your purchase. Toinsert bags
correctly, lift bins and tuck excess bag down around the sides and drop bins back into base.
Note – Model KRB6D has door mounting brackets. See diagram below for hole placement
How to Care for your New Kimberley Waste Bin
Please make sure you thoroughly read and understand the instructions and follow them carefully.
1.
For best results and longevity, always use a bin liner inside yourwaste bin.
2.
Always make sure the liner is installed without obstructing any of the bin’s moving parts.
3.
Do not overload your wastebin.
4.
Do not push the rubbish down to try to compact thewaste.
5.
Do not place heavy items on top of the binlid.
6.
Never try to close your waste bin with yourfeet.
7.
Never force the waste binclosed.
8.
Use a soft cloth and warm mild soapy water to regularly clean the interior and exterior of the
waste bin. Do not use harshdetergents.
9.
When washing the waste bin, use a soft cloth to dry the wastebin.
10.
Be careful to thoroughly dry any areas of metal to avoid rust anddamage.
11.
Do not use the bin outside or expose it to theweather.
12.
Do not place the waste bin near a heater or hotdevice.
Table of contents
