EnviroAire IAQ 1" Polarized Media Air Cleaner Operating and safety instructions

1” Polarized Media Air Cleaner
1” Polarized Media Electronic Air Cleaner
Replacement Manual

INTRODUCTION
Thank you for your recent EnviroAire IAQ 1” Polarized
Media Air Cleaner purchase. We sincerely appreciate your
business and are pleased to add your name to our growing
list of loyal customers.
Please take a few minutes to read this booklet. This will
familiarize your system’s parts and how to replace the
media, helping you understand the routing maintenance that
will be required. IMPORTANT: Scheduled replacement of
EnviroAire IAQ 1” Polarized Media Air Cleaner filtering
media is necessary.
Your EnviroAire IAQ 1” Polarized Media Air Cleaner is
an investment in the health and comfort of your family and
protection for your home and furnishings. With this purchase,
you have invested in an air cleaner that is many times more
efficient than ordinary furnace or air conditioning filters with
which you may be familiar. There are many benefits you
may expect from your EnviroAire IAQ 1” Polarized Media
Air Cleaner, this manual is meant to acquaint you with these
benefits, and with operation and maintenance information to
insure the high level of performance this high efficiency air
cleaner is designed to provide.
Follow the step-by-step instructions below to replace your media pad. Replacement media pads are available at
www. enviroaireiaq.com, or from preferred EnviroAire IAQ HVAC contractors.
WARNING: WHENEVER INSTALLING OR REMOVING THE AIR CLEANER, THE POWER TO THE FURNACE/AIR
HANDLER MUST BE TURNED OFF. CARE SHOULD BE TAKEN NOT TO LET THE JACK TOUCH ANY GROUNDED
OR METAL SURFACES. ALTHOUGH THE JACK IS SHIELDED, IT IS POSSIBLE FOR THE CENTRAL POWER TO
INSERT TO CONTACT GROUND WHICH COULD RESULT IN DAMAGE TO THE TRANSFORMER OR ELECTRONICS.
MAINTENANCE AND MEDIA PAD REPLACEMENT
FIGURE 1
REPLACEMENT INSTRUCTIONS
1. Turn the thermostat fan switch to the “OFF” position.
2. Turn off power to the furnace/air handler.
3. Open the filter access door or grille.
4. Unplug the power supply cord from the air cleaner top channel.
5. Remove the air cleaner from the filter rack or return air grille.
6. Open the air cleaner (Fig 1), carefully remove the old media
pad, and discard.
7. If dust has accumulated on the outer screen of the air cleaner,
clean with a dry brush or vacuum.
8. Position the new replacement media pad so that it is centered
within the air cleaner frame (Fig 2).
9. Close and re-latch the air cleaner.
10. Return the air cleaner to its location in the furnace/air handler
or return air grille.
11. Plug the power supply cord into the air cleaner once it is
securely in place (Fig 3).
12. Close the filter access door or grille and restore power to the
furnace/air handler.
13. Switch the thermostat back to the “ON” position. For optimum
results, the furnace/air handler should be run continuously with
the fan switch in the “ON” position, rather than the “AUTO” position.
14. In damp or humid areas, the new media pad may make a slight
snapping sound when first installed. This is normal and should stop
within 24 hours of operation.
FIGURE 1 FIGURE 2 FIGURE 3
NOTE: Media pads generally last 3-5 months, depending on household conditions. In a new installation, however, it is
suggested that the media pad be inspected and/or replaced after one month of operation due to the initial cleanup of
contaminants. Only genuine EnviroAire IAQ replacement media pads should be used with your air cleaner. Failure to do so
could cause damage to the air cleaner, alter air cleaner performance, and/or void your warranty.

REPLACEMENT PARTS
Maintenance is limited to periodic replacement of the air
cleaner media pads. This is typically done every 3-4 months.
Use only gen uine EnviroAire IAQ media pads. Replacement
media pads can be ordered from www.enviroaireiaq.com/
contact-us , or from a preferred EnviroAire IAQ heating and
air conditioning contractor. Have the model number and/or
Item # Description
1. Replacement Media Pad
2. Power-head (inside top channel)
3. Power Cord
4. Electrode Insulator Button
5. Air Cleaner Latch
6. Power ON Latch
7. Label “Unplug Before Opening”
8. Power Input Jack
9. Label
10. Electrode
11. Model/Power Rating Label
12. Air Cleaner Size Label
13. Patent Label
14. Hinge
15. Screen
16. Frame
17. Spline
For questions related to technical support or replacement media, visit www.enviroaireiaq.com/contact-us.
WARNING: FAILURE TO CHANGE THE MEDIA PAD ON A REGULAR BASIS COULD REDUCE AIRFLOW AND
CAUSE DAMAGE TO THE HEATING AND COOLING SYSTEM.
unit size available when contacting. Refer to the size label
on the unit (see item 12 in Figure 4) for the unit size. Air
cleaner media pads are sized according to the size of the
overall air cleaner, NOT the size of the media pad itself.
When giving dimensions, the first dimension given should be
the length of the side with the power-head.
FIGURE 4

FILTERING MEDIA REPLACEMENT RECORD
Date Dealer Name Date Dealer Name
LIFETIME WARRANTY
Your EnviroAire IAQ 1” Polarized Media Air Cleaner is warrantied from the date of installation through the lifetime of the
equipment to be free from defects in materials or workmanship, except, however, for the disposable media which will have
to be replaced from time to time depending upon use. EnviroAire IAQ’s exclusive obligation under this warranty shall be to
supply, without charge, a replacement for any part of the Media Air Cleaner which is found to be defective during the life of
the system.
THIS WARRANTY SHALL NOT OBLIGATE ENVIROAIRE IAQ FOR ANY LABOR COSTS AND SHALL NOT APPLY TO DEFECTS
IN WORKMANSHIP OR MATERIALS FURNISHED BY YOUR INSTALLER AS CONTRASTED TO DEFECTS DISCOVERED IN
THE AIR CLEANER ITSELF. ENVIROAIRE IAQ’S LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OTHER THAN
DAMAGE FOR PERSONAL INJURIES, RESULTING FROM ANY BREACH OF THE AFORESAID IMPLIED WARRANTIES OR
THE ABOVE LIFETIME WARRANTY IS EXPRESSLY EXCLUDED. THIS LIFETIME WARRANTY IS VOID IF DEFECT(S) RESULT
FROM FAILURE TO HAVE THIS UNIT INSTALLED BY A QUALIFIED HEATING AND AIR CONDITIONING CONTRACTOR. IF
THE LIMITED WARRANTY IS VOID DUE TO FAILURE TO USE A QUALIFIED CONTRACTOR, ALL DISCLAIMERS OF IMPLIED
WARRANTIES SHALL BE EFFECTIVE UPON INSTALLATION.
This warranty gives you specific legal rights and you may have other rights which vary from state to state. For fulfillment of
warranty parts, visit www.enviroaireiaq.com/contact-us.
Printed in the U.S.A
© 2020 EnviroAire IAQ Premium Indoor Air Quality Products