Carrier RMAP-ST User manual

ROOM AIR
PURIFIER
Quick Start Guide
RMAP-ST
RMAP-XL
RMAP-SST
RMAP-SXL

This guide is for quick reference only. Please see the User Manual for complete
product information and operational instructions.
How to Prepare/Change the Filter
Hold the top cover of the product with
both hands and pull up.
Grasp the filter cover hole on the rear and
pull it forward. Remove the filter from the
unit by pulling it straight out.
Remove the plastic packaging from the filter.
►Failing to remove the packaging will
result in abnormal sounds and the filter
will not work properly; and it may cause
a fire or other damage to the product.
CAUTION
• Be sure to unplug the unit before removing the filter packaging.
• Remove the plastic packaging from the filter before use.
• Keep plastic packaging away from children as it may cause suffocation.
Slide the filter back into the unit.
Filter cover
hole
Plastic
packaging
12
3 4
Replace filter cover.
►Insert the cover into the fixed groove at
the bottom of the product.
►Slide the cover forward so that the cover
fits into the top grooves.
Cover-positioning
groove at top
5
Fixed groove at bottom
Note

Hold the top cover of the product with both
hands and slide it back in place,
making
sure the logo appears in the front.
When the filter installation is complete,
plug the unit into a 120V outlet, press the
+ " " button on the control panel for five
seconds or more to initialize it.
►The red filter light will turn off when the
product is reset.
Sleep
Auto
76
Display
Smart Auto Mode
Sleep Mode
Filter Replacement Indicator
Wi-Fi
Timer
Indoor Air Quality Light
Control Panel
Sleep
LED
Auto
Turbo
Sleep mode / Timer Turn up the fan speed and time
(by 1 hour)
LED ON/OFF & Wi-Fi® connection Smart automatic operation
Turn down the fan speed and time
(by 1 hour) Power ON/OFF
Sleep
LED
Auto
Control Panel Descriptions

4
3
2
1
How to Install Casters (Optional)
Inside of the air purifier package, there is a small box containing four casters and eight screws.
Retain the removed bottom bases and screws for future use.
Replace each base with a caster, utilizing two screws per caster.
Remove the four bottom bases from the air purifier with a screw driver.
If there is no caster box inside the product box, please contact customer
service at 1-888-320-0909.
©2021 Carrier. All Rights Reserved.
Manufacturer reserves the right to discontinue, or change at any time, specifications
or designs without notice or without incurring obligations. Third-party trademarks and
Third-party trademarks and logos are the property of their respective owners.
carrierathome.com 1-888-320-0909 01-811-20535-02
Normal Operation
Press the button to turn on.
► The previously selected operation mode will
be displayed.
Press the button on the control panel to
select your desired fan speed.
► You can adjust the fan speed from level 1 (F1) to
level 18 (F18).
Note: The default home display on Wi-Fi® models
will show a PM2.5 reading. Once the button
is pushed, the display will switch to show designated
fan speed.
Note
When the air purifier turns on, the sensor is initialized and the display
shows during initialization.
2
1
Note