Envision H22W User manual

English
Operation Instructions
Thank you for purchasing this monitor, a high-resolution multi-scan color
monitor.
Please read this guide thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This monitor has been tested and found compliant with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide proper protection against harmful interference to
a residential installation. This monitor generates, uses, and can radiate
radio frequency energy. Harmful interference to radio communication may
be led as a result if it‘s not properly installed and used. However, there is
no guarantee that interference will not occur in a particular installation. If
this monitor does cause serious interference to radio or television reception,
resetting the monitor may determine it. Moreover, users are encouraged to
correct interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the monitor and the receiver further away from each other.
Connect the monitor into an outlet on a circuit different from that to
which the receiver is connected.
Consult your local dealer or an qualied technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power
supply cord and the provided shielded video interface cable with bonded
ferrite cores. Also, any unauthorized changes or modications to this monitor
would void the user‘s authority to operate this device.
Note: If necessary, shielded interface cables and AC power cord must be
used to meet the emission level limits.

English
Content
Safety Precautions .............................................................................1
First Setup ..........................................................................................2
Quick Installation .............................................................................2-5
Front View of the Product...................................................................6
Rear View of the Product....................................................................6
Using On Screen Display (OSD) Functions.....................................7-9
Supporting Timing Modes.................................................................10
Technical Information........................................................................ 11
Care and Maintenance .....................................................................12
Troubleshooting................................................................................12

English
1
Safety Precautions
This monitor is manufactured and tested on a ground principle that a
user’s safety comes rst. However, improper use or installation may result
danger to the monitor as well as to the user. Carefully go over the following
WARNINGS before installation and keep this guide handy.
WARNINGS:
This monitor should be operated only at the correct power sources
indicated on the label on the rear end of the monitor. If you’re unsure of
the power supply in your residence, consult your local dealer or power
company.
Do not try to repair the monitor yourself as it contains no user-
serviceable parts. The monitor should only be repaired by a qualied
technician.
Do not remove the monitor cabinet. There is high-voltage parts inside
that may cause electric shock to human bodies, even when the power
cord is disconnected .
Stop using the monitor if the cabinet is damaged. Have it checked by a
service technician.
Put your monitor only in a clean, dry environment. Unplug the monitor
immediately if gets wet and consult your service technician.
Always unplug the monitor before cleaning it. Clean the cabinet with a
clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not
directly onto the glass screen.
Keep the monitor away from magnetic objects, motors, TV sets, and
transformer.
Do not place heavy objects on the cable or power cord.
For PLUG CABLE EQUIPMENT, the Socket-outlet shall be installed
near the equipment and shall be easily accessible.

English
2
First Setup
Congratulation for purchasing this monitor of high performance!
This monitor comes with the following accessories :
Power cable
D-Sub cable
User’s guide
Warranty Documents
Quick Installation
Installing & Removing the Base
Install Remove

English
3
Preparing To Install The Optional Wall Mount Arm (Not Included)
This monitor can be attached to a wall mounting arm you can purchase separately.
Turn the power OFF then dis-connect the cables from the monitor before performing
the procedure below. Lay the monitor face down on a soft surface.
1. Remove the base. It is attached to the stand by hooks.
2. Remove the 4 screws holding the stand to the hinge.
3. Remove the stand.

English
4
Attaching The Optional Wall Mount Arm (not supplied)
Follow these steps to nish installing the wall mounting arm:
1. Place the wall mounting arm onto the back of the monitor. Line up the holes of
the arm with the holes in the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Reconnect the cables. Refer to the user’s manual that came with the optional
wall mounting arm for instrucstions on attaching it to the wall.
NOTE
The ENVISION H22W is in compliance with the most current revision of the VESA
100mm Flat Panel Monitor Physical Mounting Interface (FPMPMI standard).

English
5
Connecting the Monitor
1. Connect power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
2. Connect Analog video cable (D-Sub cable)
Make sure both monitor and computer are powered OFF. Connect the video
cable (D-Sub cable) to the computer, then to the monitor.
3. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
4. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1680 x 1050 @ 60 Hz
Resolution Right-click on the Windows desktop > Properties > Settings >
“Desktop Area”. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card’s user guide for
instructions.
Connection Diagram

English
6
Front View of the Product
➊ OSD TURN ON/OFF ➍ CONFIRM SELECTION
➋ SCROLL DOWN/DECREASE ➎ POWER ON/OFF
➌ SCROLL UP/INCREASE ➏ LED INDICATOR
Rear View of the Product
➐ POWER INPUT
➑ VGA INPUT
➊ ➋ ➌ ➍ ➎ ➏
➐ ➑

English
7
Using On Screen Display (OSD) Functions
Display main menu.
Exit from OSD menu.
Auto adjust the image when not in OSD menu.
Conrm the selection.
▲or ▼
Select the desired item when in OSD menu.
When not in OSD menu, it is to immediately activate Contrast/
Brightness. It should be change to Contrast/ Brightness by pressing
button ▼or ▲.
▼ + ▲ Recall both of Contrast and Brightness.
+ ▼ Power Lock (when not in OSD menu)
+ ▲ OSD Lock (when not in OSD menu)
Main Menu
1
2
1
2

English
8
OSD Functions
Auto Image Adjust : Auto adjust Horizontal Position, Vertical Position,
Phase (Fine Tune) and Clock (H. Size) of the screen. Available in Analog
mode only.
Contrast : Adjust the foreground white level of screen image.
▲:increase contrast, ▼: decrease contrast.
Brightness : Adjust the luminance of the video.
▲: increase brightness, ▼:decrease brightness.
Color Adjust : Select the color temperature between 9300K, 6500K, 5400K
and User Color to meet user’s preference.
9300K : Adds blue to screen image for cooler white.
6500K : Adds red to screen image for warmer white and richer red.
5400K : Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
2. Press ▼or ▲button to adjust selected color.
Information : To display the information, regarding the current input signal
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
Horizontal Size : Adjust the width of the screen image.
▼:decrease the width of screen image, ▲:increase the width of screen image.
H./V. Position : To adjust the horizontal and vertical position of the video.
H. Position : ▲:move screen to the right, ▼:move screen to the left.
V. Position : ▲: move screen up, ▼:move screen down.
Fine Tune : Adjust the delay time of data and clock.
Press ▲or ▼to adjust to your preference.
Sharpness : Adjust the clarity of a non-WSXGA (1680x1050) signal with
▼or ▲button.

English
9
Setup Menu : Set up Language Select, Resolution Notice, OSD Position,
OSD Time Out and OSD Background.
Setup Menu >Language Select : Allow users to choose from available
languages.
Setup Menu >Resolution Notice : Resolution Notice is to remind the user
to set the resolution to 1680x1050 for best image quality when the resolution
setting is not at 1680 x 1050.
Choose “On” : Every 30 seconds, it will show a window “ For best
picture quality change resolution to 1680 x 1050” to remind the user to
set the resolution to 1680x1050 for best image quality.
Choose “Off” : It will not show a window to remind the user to set the
resolution to1680 x 1050.
Setup Menu >OSD Position : Press ▼ or ▲ button to select between
horizontal and vertical OSD Position adjustment.
Horizontal OSD Position : To horizontally adjust the OSD position.
▲:move OSD to the right, ▼:move OSD to the left.
Vertical OSD Position : To vertically adjust the OSD position.
▲: move OSD up, ▼:move OSD down.
Setup Menu >OSD Time Out : Automatically turn off On Screen
Display(OSD)after a preset period of time.
Setup Menu>OSD Background : Allows the user to turn the OSD
background On or Off.
Memory Recall : To recall factory settings for Video controls.
Press button 2 to select the Memory Recall menu option.
?

English
10
Supporting Timing Modes
Warning : Do not set the graphic card in your computer to exceed these maximum
refresh rates. Doing so may result in permanent damage to your monitor.
VESA 720 x 400 @ 70Hz
VESA 640 x 480 @ 60Hz
MAC 640 x 480 @ 67Hz
VESA 640 x 480 @ 75Hz
VESA 800 x 600 @ 56Hz
VESA 800 x 600 @ 60Hz
VESA 800 x 600 @ 72Hz
VESA 800 x 600 @ 75Hz
MAC 832 x 624 @ 75Hz
VESA 848 x 480 @ 60Hz
VESA 1024 x 768 @ 60Hz
VESA 1024 x 768 @ 70Hz
VESA 1024 x 768 @ 75Hz
VESA 1152 x 864 @ 75Hz
VESA 1280 x 720 @ 60Hz
VESA 1280 x 960 @ 60Hz
VESA 1280 x 768 @ 60Hz
VESA 1280 x 1024 @ 60Hz
VESA 1280 x 1024 @ 75Hz
VESA 1440 x 900 @ 60Hz
VESA 1440 x 900 @ 75Hz
VESA 1680 x 1050 @ 60Hz

English
11
Technical Information
Technical Specication
LCD Panel 22” (548mm Viewable Image Size) TFT Widescreen LCD
Power Management
Energy Star compliant VESA
DPMS compatible
< 1 W
Displayable Resolution WSXGA 1680 x 1050 max. Vertical Frequency 60Hz max.
LCD Display Color 16.7M
Tilt 0°~20°
Temperature Operating: 0°C ~ +40°C
Storage: -20°C ~ + 60°C
Compliance cULus, CE, FCC-B, Energy Star
Power Input Voltage AC100-240 V
Input Signal RGB Analog
Note: Product Specications are subject to change without notice.

English
12
Care and Maintenance
Care
Avoid exposing your monitor directly to sunlight or other heat source. Place your
monitor away from the sun to reduce glare.
Put your monitor in a well ventilated area.
Do not place any heavy things on top of your monitor.
Make certain your monitor is installed in a clean and moisture-free area.
Keep your monitor away from magnets, motors, transformers, speakers, and TV
sets.
Safety Tips
If smoke, abnormal noise or odor came out from your monitor, caution you
should remove the power cord immediately and call your service center.
Never remove the rear cover of your monitor cabinet. The display unit inside
contains high-voltage parts and may cause electric shock to human bodies.
Never try to repair your monitor yourself. Always call your service center or a
qualied technician to x it.
Troubleshooting
No power
Make sure A/C power cord is securely connected to the power adapter and the
power supply is rmly connected to the monitor.
Plug another electrical device into the power outlet to verify that the outlet is
supplying proper voltage.
Make sure all signal cables are installed.
Power on but no screen image
Make sure the video cable supplied with the monitor is tightly secured to the
video output port on back of the computer. If not, tightly secure it.
Adjust brightness.
Wrong or abnormal colors
If any colors (red, green, blue) are missing, check the video cable to make sure
it is securely connected. Loose or broken pins in the cable connector could
cause an improper connection.
Connect the monitor to another computer.