Envision H2476WDHAL User manual

23.6" LCD Monitor Envision H2476WDHAL
1
Service
Service
Service
Horizontal Frequency
30- 83kHz
Table of Contents
Description Page Description Page
SAFETY NOTICE
ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE
CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING
ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES.
Table Of Contents…………………..…………………..…...1
Revision List.…...................................................……......2
Important Safety Notice.….….............................……......3
1.Monitor Specification..............................………............4
2.LCD Monitor Description……….…………………….......5
3.Operation Instruction.…………...................……...........6
3.1.General Instructions....................................…...........6
3.2.Control Buttons and Connections...............................6
3.3.OSD Menu…..............................................................8
4.Input/Output Specification..............……………….......12
4.1.Input Signal Connector...............………..................12
4.2.Factory Preset Display Modes……..........................14
4.3.Panel Specification…………..………………………..15
5.Block Diagram….........................................................17
5.1.Main Board…..….............................................17
5.2.Power Board…………..…………………………......18
6.Schematic…………..….........................................19
6.1.Main Board..…….…...........................................19
6.2.Power Board..……….........................................25
6.3.Key Board…............……....................................27
7.PCB Layout..………..............................................28
7.1.Main Board………..…........................................28
7.2.Power Board….…..............................................30
7.3.Key Board………..…..........................................32
8.Maintainability………............................................33
8.1.Equipments and Tools Requirement…...............33
8.2.Trouble Shooting…..………...............................34
9.White-Balance,Luminance Adjustment…..............38
10.Monitor Exploded View……................................40
11.BOM List…………..……………………….............42
CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING

2
Revision List
Version Release Date Revision History TPV Model Name
A01 Sep.07.2012 Initial release HDB2NU2BAJE1DN

3
Important Safety Notice
Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service
procedures recommended by AOC and described in this service manual are effective methods of performing service
operations. Some of these service operations require the use of tools specially designed for the purpose. The
special tools should be used when and as recommended.
It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in
order to minimize the risk of personal injury to service personnel. The possibility exists that improper service
methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE
NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in
which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not
recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the
equipment will be jeopardized by the service method selected.
Hereafter throughout this manual, AOC Company will be referred to as AOC.
WARNING
Use of substitute replacement parts, which do not have the same, specified safety characteristics may create shock,
fire, or other hazards.
Under no circumstances should the original design be modified or altered without written permission from AOC.
AOC assumes no liability, express or implied, arising out of any unauthorized modification of design.
Servicer assumes all liability.
FOR PRODUCTS CONTAINING LASER:
DANGER-Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM.
CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION -The use of optical instruments with this product will increase eye hazard.
TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S
REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF
THIS SERVICE MANUAL.
Take care during handling the LCD module with backlight unit
-Must mount the module using mounting holes arranged in four corners.
-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen.
-Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to
the panel.
-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
-Make certain that treatment person’s body is grounded through wristband.
-Do not leave the module in high temperature and in areas of high humidity for a long time.
-Avoid contact with water as it may a short circuit within the module.
-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may
damage the panel.)

4
1. Monitor Specifications
LCD Panel
Model number H2476WDHAL
Driving system TFT Color LCD
Viewable Image Size 59.8cm diagoanl
Pixel pitch 0.2715mm(H) x 0.2715mm(V)
Separate Sync. H/V TTL
Display Color 16.7M Colors
Dot Clock 170 MHz
Resolution
Horizontal scan range 30 kHz -83 kHz
Horizontal scan Size(Maximum) 521.28mm
Vertical scan range 50 Hz - 76 Hz
Vertical scan Size(Maximum) 293.22mm
Optimal preset resolution 1920 x 1080 (60 Hz)
Highest preset resolution 1920 x 1080 (60 Hz)
Plug & Play VESA DDC2B/CI
Input Connector D-Sub 15pin & DVI-D,HDMI
Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, Positive &
DVI-D Digital Interface (TMDS),HDMI
Power Source 100-240VAC, 50/60Hz
Power Consumption
Active < 35 W
Standby < 0.5 W
Physical
Characteristics
Connector Type 15-pin Mini D-Sub & DVI-D,HDMI
Signal Cable Type Detachable
Dimensions & Weight:
Height (with base) 399.9 mm
Width 571.4 mm
Depth 211.2 mm
Weight (monitor only) 3.98 kg
Environmental
Temperature:
Operating 0°C to 40° C
Non-Operating -25°Cto 55°C
Humidity:
Operating 10% to 85% (non-condensing)
Non-Operating 5% to 93% (non-condensing)

5
2. LCD Monitor Description
The LCD monitor will contain a main board, a power board and a key board which house the flat panel control logic,
brightness control logic and DDC.
The power part will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips each
voltage.
AC-IN
100V-240V
Monitor Block Diagram
Power board
(Adapter/ Converter)
Flat Panel and
LED backlight
Main Board RS232 Connector
For white balance
adjustment in factory
mode
LED Drive.
Video signal, DDC
HOST Computer
Key Board

6
3. Operating Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
* The power cord should be connected.
* Press the power button to turn on the monitor. The power indicator will light up.
3.2 Control Buttons and Connections
Power
Press the Power button to turn On/off the monitor.
Volume adjustment hot key
When there is no OSD, press Volume (-) to active volume adjustment bar, press - or + to adjust volume.
4:3 or wide image ratio hot key
When there is no OSD, press + key to change 4:3 or wide image ratio. (If the product screen size
is 4:3 or input signal resolution is wide format, the hot key is disable to adjust. )
Auto / Exit
When the OSD is closed, press Auto button will be auto configure hot key function .
Source hot key
When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously
to select the input source showed in the message bar , press Menu/Enter button to change to the source selected.

7
Connecting the Monitor
Cable Connections On Back of Monitor and Computer:
1. Power .
2. HDMI
3. DVI
4. Analog (DB-15 VGA cable
5. Audio
To protect equipment, always turn off the PC and LCD monitor before connecting.
1 Connect the power cable to the AC port on the back of the monitor.
2 (Optional-Requires a video card with HDMI port)- Connect one end of the HDMI cable to the back of the monitor
and connect the other end to the computer's HDMI port.
3 (Optional – Requires a video card with DVI port) - Connect one end of the DVI cable to the back of the monitor and
connect the other end to the computer’s DVI port.
4 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's
D-Sub port.
5 Connect the audio cable to audio in port on the back of the monitor.
6 Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
troubleshooting.

8
3.3 OSD Menu
1) Press the MENU-button to activate the OSD window.
2) Press - or + to navigate through the functions. Once the desired function is highlighted, press the MENU-button
to activate sub-menu . Once the desired function is highlighted, press MENU-button to activate it.
3) Press - or + to change the settings of the selected function. Press - or + to select another function in sub-menu .
Press AUTO to exit . If you want to adjust any other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on.
Notes:
1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to
adjust.
3) One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.

9
Function Control Illustration

10

11

12
4. Input/Output Specification
4.1 Input Signal Connector
Analog connectors
Pin Number 15-Pin Side of the Signal Cable
1 Video-Red
2 Video-Green
3 Video-Blue
4 Ground
5 Detect Cable
6 GND-R
7 GND-G
8 GND-B
9 +5V
10 Ground
11 Ground
12 DDC-Serial data
13 H-sync
14 V-sync
15 DDC-Serial clock
DVI connectors
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
1 TMDS Data 2- 9 TMDS Data 1- 17 TMDS Data 0-
2 TMDS Data 2+ 10 TMDS Data 1+ 18 TMDS Data 0+
3 TMDS Data 2/4
Shield 11 TMDS Data 1/3
Shield 19 TMDS Data 0/5
Shield
4 TMDS Data 4- 12 TMDS Data 3- 20 TMDS Data 5-
5 TMDS Data 4+ 13 TMDS Data 3+ 21 TMDS Data 5+
6 DDC Clock 14 +5V Power 22 TMDS Clock
Shield
7 DDC Data 15 Ground(for+5V) 23 TMDS Clock +
8 N.C. 16 Hot Plug Detect 24 TMDS Clock -

13
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground
2 TMDS Data 2
Shield 10 TMDS Clock + 18 +5V Power
3 TMDS Data 2 11 TMDS Clock
Shield 19 Hot Plug Detect
4 TMDS Data 1+ 12 TMDS Clock
5 TMDS Data
1Shield 13 CEC
6 TMDS Data 1 14 Reserved (N.C.
on device)
7 TMDS Data 0+ 15 SCL
8 TMDS Data 0
Shield 16 SDA

14
4.2 Factory Preset Display Modes
Standard Resolution H. Frequency (kHz) V. Frequency (Hz)
VGA
640x480@60Hz 31.469 59.94
640x480@72Hz 37.861 72.809
640x480@75Hz 37.5 75
SVGA
800x600@56Hz 35.156 56.25
800x600@60Hz 37.879 60.317
800x600@72Hz 48.077 72.188
800x600@75Hz 46.875 75
XGA
1024x768@60Hz 48.363 60.004
1024x768@70Hz 56.476 70.069
1024x768@72Hz 57.669 71.996
1024x768@75Hz 60.023 75.029
SXGA
1280x1024@60Hz 63.981 60.02
1280x1024@75Hz 79.976 75.025
WXGA 1440x900@60Hz 55.935 55.887
WSXGA 1680x1050@60Hz 65.29 59.95
WUXGA 1920x1080@60HZ 67.5 59.934
IBM-MODE DOS 720x400@70Hz 31.469 70.087
MAC MODE VGA 640x480@67Hz 35 66.667
MAC MODE SVGA 832x624@75Hz 49.725 74.551

15
4.3 Panel Specification
4.3.1 General Features
LCM236H3L01A00C M236HGE-L10 is a 23.6” TFT Liquid Crystal Display module with WLED Backlight unit and
30Pins 2ch-LVDS interface. This module supports 1920 x 1080 Full HD mode and can display up to 16.7M colors.
4.3.2 Display Characteristics
ITEMS Unit SPECIFICATIONS
Screen Size 23.547” real diagonal
Driver Element - a-si TFT active matrix -
Pixel Number Pixel 1920 x R.G.B. x 1080 pixel
Pixel Pitch Mm 0.2715 (H) x 0.2715 (V) mm
Pixel Arrangement - RGB vertical stripe -
Display Colors - 16.7M color
Tran missive Mode Color Normally white
Surface Treatment - AG type, 3H hard coating, Haze 25 -
Luminance, White Cd/m2 250 Cd/m2
Color Gamut - 72% of NTSC(Typ.)
TCO - TCO 5.0 compliance
4.3.3 Electrical Characteristics
Parameter Symbol
Value
Unit
Min. Typ. Max.
Power Supply Voltage Vcc 4.5 5 5.5 V
Ripple Voltage Vrp - - 300 mV
Rush Current Irush 1.52 3 A
Power Supply Current—White 0.39 0.48 A
Power Supply Current—Black 0.98 1.27 A
Power Supply Current--Vertical Stripe 0.95 1.27 A
Power Consumption PLCD (4.9) (6.35) A
LVDS differential input voltage VID 200 - 600 mV
LVDS common input voltage VIC 1.0 1.2 1.4 V
Logic High Input Voltage VIH 2.64 3.6 V
Logic Low Input Voltage VIL 0 0.66 V

16
4.3.4 Backlight Unit
Parameter Symbol
Value
Unit
Min Typ. Max.
Light Bar Input Voltage VLED 47.3 54.4 63.2 VDC
Light Bar Input Current ILED 58 60 63 mA
DC
Power Consumption PLED - 13 15 W
LED Life Time LBL 30000 - - Hrs
IFP LED Peak forward current ILED - - 180 mA DC
4.3.5 Optical Characteristics
Item Symbol
Conditions Min. Typ. Max. Unit
Color
Chromaticity
(CIE 1931)
Red
Rx
x

=0°, y

=0°
R=G=B=255
Grayscale
Typ –
0.03
0.64
Typ +
0.03
Ry 0.338
Green
Gx 0.311
Gy 0.619
Blue
Bx 0.159
By 0.059
White
Wx 0.313
Wy 0.329
Center Luminance of
White
(Center of Screen)
Lc 200 250 - cd/m2
Contrast Ratio CR 700 1000 - -
Response Time TR
x

=0°, y

=0° - 1.3 2.2 ms
TF- 3.7 5.5 ms
White Variation W

x

=0°, y

=0° 75 80 - -
Viewing
Angle
Horizontal - CR 10≧
BM-5A
150 170 -
Deg.
Vertical - 140 160 -
Horizontal - CR 5≧
BM-5A
160 178 -
Vertical - 150 170 -

17
5. Block Diagram
5.1 Main Board
Scalar IC NT68676UFG
(Include MCU, ADC, OSD)
(U401)
D-SUB
Connector
(CN101)
EEPROM
Pm25LD020C-SCE
(U402)
D-HS
D-VS
RGB
LCD Interface
(CN408)
Key Control
interface
(CN404)
Crystal
12MHz
(X401)
EEROM
M24C02-RMN6TP
(U101)
DDCA-SDA
DDCA-SCL
DVI
Connector
(CN102)
EEROM
M24C02-RMN6TP
(U105)
SCL_DVI
SDA_DVI
HDMI
Connector
(CN501)
EEROM
M24C02-RMN6TP
(U109)
HDMI -SCL
HDMI-SDA

18
5.2 Power Board
EMI filter
Start Resistor
(R913)
PW Control
LD7576JGR
(IC901)
Transformer
(T901)
AC input
5V
Bridge
Rectifier
and Filter
Feedback
Circuit
Rectifier
diodes
Photo coupler
(IC902)
14.5V
Power Switch
(Q904)
D801
LED
(CN804)
PWM Control
OZ9998BGN
(U801)
14.5V
DIM
ON/OFF
L801
Q801

19
6. Schematic
6.1 Main Board
715G5325M01000004Q
DET_DVI
C103 47nF 16V
C112
22P 50V
CN102
JACK
DAT2- 1
DAT2+ 2
2/4s hield 3
DAT4- 4
DAT4+ 5
DDC SCL 6
DDC SDA 7
VSY NC 8
DAT1- 9
DAT1+ 10
1/3s hield 11
DAT3- 12
DAT3+ 13
+5V 14
SY NC GND 15
HPD 16
DAT0- 17
DAT0+ 18
0/5s hield 19
DAT5- 20
DAT5+ 21
clk shield 22
clk+ 23
clk- 24
GND
26
GND
25
GND
27 GND 28
C108 47nF 16V
R136 10R 1/16W 5%
C118
NC/100N 16V
R128 100R 1/16W 5%
R127 100R 1/16W 5%
R110 100R 1/16W 5%
R108
75R 1/16W 1%
R133 4K7 1/16W 5%
C105 5PF 50V
C109 47nF 16V
FB105 300OH M
R118 100R 1/16W 5% D101
BAV70
3
1 2
R135 10R 1/16W 5%
C101
NC/100N 16V
R142 10R 1/16W 5%
Q101
NC
D102
BAV70
3
1 2
C111
22P 50V
R130 NC
R140 10R 1/16W 5%
C104 47nF 16V
DAT0-
R122 4K7 1/16W 5%
FB104 300OH M
DCLK-
R134 22K 1/16W 5%
DCLK+
C110 47nF 16V
C121
NC/100N 16V
DAT0+
R115 10K 1/16W 5%
R123 4K7 1/16W 5%
R111 100R 1/16W 5%
C122
NC/100N 16V
DET_VGA
R138 10R 1/16W 5%
R137 10R 1/16W 5%
C117
NC/100N 16V
DAT2-
R126 100R 1/16W 5%
R121
2K2 1/16W 5%
C123
NC/100N 16V
C115
NC/100N 16V
R125 100R 1/16W 5%
R120
2K2 1/16W 5%
DAT1+
R141 10R 1/16W 5%
ZD102
NC/R LZ5.6B
R139 10R 1/16W 5%
R112 100R 1/16W 5%
DDC_WP
R109
75R 1/16W 1%
R124 22K 1/16W 5%
FB103 0R05 OHM
R119 100R 1/16W 5%
R103 100R 1/16W 5%
C102 47nF 16V
SCL_VGA
C124
NC/100N 16V
R107
75R 1/16W 1%
FB102 0R05 OHM
C106 5PF 50V
C116
220N16V
C113
220N16V
ZD101
NC/R LZ5.6B
FB106
300OHM
RED-
U105
M24C02-RMN6TP
E0 1
E1 2
E2 3
VSS 4 SDA
5SCL
6WC
7VCC
8
GREEN -
R129 1K 1/16W 5%
BLUE-
CN101
DB15
1
6
2
7
3
8
4
9
5
11
12
13
14
15
10
1716
R132 4K7 1/16W 5%
R101
NC
C114
NC/100N 16V
R104 100R 1/16W 5%
FB101 0R05 OHM
HPD
R117
0R05 1/10W
DVI5V1
C107 5PF 50V
R102 100R 1/16W 5%
RXC+ 5
SCL_D VI
RX2+ 5
RX2- 5
DVI_SDA5
DVI5V 5
U102
M24C02-RMN6TP
E0 1
E1 2
E2 3
VSS 4 SDA
5SCL
6WC
7VCC
8
RXC- 5
RX1+ 5
RX0- 5
RX1- 5
DAT2+
DVI_SCL5
RX0+ 5
DAT1-
HSYNC 5
DVI_HPD 5
DDCA_SDA5
GNDB 5
DDCA_SCL5
VSY NC 5
DET_VGAI 5
RIN 5
+5V_SB4,5, 7,8
BIN 5
GNDG 5
DDC_WP 5
DET_DVII 5
GIN 5
GNDR 5
VGA5V
ESD_DVI
RED+
ESD_D VI
+5V_SB
DVI5V1
ESD_D VI
+5V_SB
BLUE+
SDA_VGA
VGA5V
HSI
ESD_VGA
ESD_VGA
ESD_VGA
DET_DVI
GREEN +
DDC_WP
VSI
PC4
VSI
HSI
SDA_D VI
SDA_VGA
SCL_VGA
U103
AZC 399-04S
I/O1
1
GND
2
I/O2
3I/O3 4
VDD 5
I/O4 6
U104
AZC399-04S
I/O1
1
GND
2
I/O2
3I/O3 4
VDD 5
I/O4 6
U106
AZC399-04S
I/O1
1
GND
2
I/O2
3I/O3 4
VDD 5
I/O4 6
U107
AZC 399-04S
I/O1
1
GND
2
I/O2
3I/O3 4
VDD 5
I/O4 6
ZD106
RLZ5.6B
1 2
R105
1K 1/16W 5%
R106
1K 1/16W 5%
ZD107
RLZ5.6B
1 2
PE0*
PC4
U101
AZC399-04S
I/O1
1
GND
2
I/O2
3I/O3 4
VDD 5
I/O4 6
ADC4
PB0
OE M MOD E L Size
Rev
Date
Sheet of
TPV MOD EL
PCB N AME
称爹
T P V ( Top Vict ory Elect ronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹 B
Custom
38Wednes day , February 15, 2012
715G5325-M0C-000-00402. INPUT

20
R160
10K 1/16W 5%
HDMI1_+5V
DET_HDMI
R162
0R05 1/ 16W
ADC4
HDMI1/D0-
HDMI_SDA
HDMI1/D2+
HDMI_SCL
HDMI1/CK+
HDMI1/D1-
HDMI1/D2-
HDMI1/D1-
HDMI1/CK-
HDMI1/D0-
HDMI1/D0+
HDMI1/D1+
HDMI1/D2+
HDMI1/D0+
HDMI1/D1+
HDMI1/D2-
HDMI1/CK-
HDMI1/CK+
PE1*
PC4
HDMI_HOTPLUG
HDMI_SCL
HDMI_SDA
CEC3*
HDMI1_+5V
DET_HDMI
U109
AZC 399-04S
I/O1
1
GND
2
I/O2
3I/O3 4
VDD 5
I/O4 6
R161
10K 1/16W 5%
R151
1K 1/16W 5%
ZD108
RLZ5.6B
1 2
Q102
LMBT3904LT1G
HDMI1/D2+
HDMI1/CK+
HDMI1/CK-
HDMI1/D0+
HDMI1/D1+
HDMI1/D0-
HDMI1/D1-
HDMI1/D2-
HDMI1/D2+
HDMI1/CK-
HDMI1/CK+
HDMI1/D0+
HDMI1/D1+
HDMI1/D0-
HDMI1/D2-
HDMI1/D1-
HDMI1/D2+
HDMI1/CK+
HDMI1/CK-
HDMI1/D0+
HDMI1/D1+
HDMI1/D1-
HDMI1/D2-
HDMI1/D0-
OEM MOD E L
Size
Rev
Date Sheet of
TPV MOD EL
PCB NAME 称爹
T P V ( Top Victory Electronics Co . , Ltd. )
Key Component
絬 隔 瓜 絪 腹 B
B
48Wednesday , February 15, 2012
715G5325-M0C-000-00403. HDMI
U111
NC/R Clamp0524P.TCT
IN1 1
IN2 2
GND
3
IN3 4
IN4 5 OUT4
6OUT3
7
GND
8
OUT2
9OUT1
10
U110
AOZ8804DI
CH1 1
CH2 2
VN 3
CH3 4
CH4 5 NC
6NC
7VN
8NC
9NC
10
R153
1K 1/16W 5%
U108
M24C02-RMN6TP
E0 1
E1 2
E2 3
VSS 4 SDA
5SCL
6WC
7VCC
8
D103
BAT54C
1
3
2
C119
0.1UF 16V
R159 100R 1/16W 5%
Q708
NC
ZD104
NC/RLZ5.6B
R154
10R 1/16W 5%
ZD105
NC/RLZ5.6B
R156 4K7 1/16W 5%
CEC
R155 4K7 1/16W 5%
ZD103
NC/RLZ5.6B
U113
NC /RClam p0524P.TCT
IN1 1
IN2 2
GND
3
IN3 4
IN4 5 OUT4
6OUT3
7
GND
8
OUT2
9OUT1
10
R753 NC
U112
AOZ8804DI
CH1 1
CH2 2
VN 3
CH3 4
CH4 5 NC
6NC
7VN
8NC
9NC
10
CN501
HDMI
SHELL1
20
SHELL2
21
D2+ 1
D2 Shield 2
D2- 3
D1+ 4
D1 Shield 5
D1- 6
D0+ 7
D0 Shield 8
D0- 9
CK+ 10
CK Shield 11
CK- 12
CE Remote 13
NC 14
DDC CLK 15
DDC DATA 16
GND 17
+5V 18
HP DET 19
SHELL4
23
SHELL3
22
C120
220N16V
C125
0.1U F 16V
R158 100R 1/16W 5%
HDMI1_D2+ 5
HDMI1_D0+ 5
R754
NC
R157 22K 1/16W 5%
HDMI1_D0- 5
HDMI1_D2- 5
HDMI1_CK+ 5
HDMI1_CK- 5
DDC_WP 5
+5V_SB 3,5,7,8
HDMI1_D1+ 5
HDMI1_HPD 5
CEC_CTRL 5
DET_HDMI1 5
HDMI1_+5V5
HDMI1_D1- 5
HDMI1_SDA5
HDMI1_SCL5
HD MI1_+5V
ESD_HDMI1
+5V_SB
ESD_HD MI1
HDMI1_+5V
HDMI_SCL
HDMI_SDADET_HDMI1
HDMI_HOTPLUG