EPAuto 707129800176 User manual

EPAuto 12V DC Portable Air Compressor Pump, Digital Tire Inflator

CONVENIENCE: Plug directly into
Cigarette Lighter Socket of your
Vehicle. 12VDC 10~15 amps,
120~180W
MULTIPLE USES: Inflate tires on
cars, bikes, sedan and midsize SUV.
DOES NOT SUPPORT LT, HT and
Truck Tires. Adaptors for balls and
inflatables included.
EASY TO READ: 4 Display Units:
PSI, KPA, BAR, KG/CM
LED FLASHLIGHT: Bright Torch
PREVENT OVER INFLATION: Auto
shut off when reaching the desired
tire pressure. Overheat protection
shuts off automatically when
overloading.
Product description
Color: Blue
Important Information before your Purchase
DO NOT SUPPOT LT, HT and Truck Tires.
It is for 12 Volt DC ONLY.
DO NOT SUPPOT 24 Volt.
Specification:
Working voltage: DC12V
Rating power: 120W
Inflating Speed: 1.06 CFM
Min. Amp: 10 Amps
Maximum Amp: 15 Amps
LED flashlight: Bright Torch
Maximum Working Pressure 100 PSI
Display Units: KPA, PSI, BAR, KG/CM
The power cable is with a 15 amps fuse, and there is a backup fuse in the package.

Overheat protector will shut of the unit when it exceeds 167°F
CE certified
Operating Instructions:
1. Make sure the power switch is at OFF position and the vehicle engine is
running.
2. Remove the dust cap from the tire valve, and then attach the air chuck to the
tire valve stem, and screw onto tire’s valve stem.
3. Plug the power cord into a 12V cigarette lighter socket.
4. Press (M) button to choose the display unit. (4 units available: PSI, KPA, BAR,
KG/CM). Press (-) or (+) button to set the desired pressure, and then wait until it
stops flashing.
5. Turn on the power switch. The compressor will automatically stop inflating once
the desired pressure is reached.
6. When the desired pressure is reached, turn OFF the power.
7. Unscrew the valve connector, place the tire valve dust cap back to the tire &
disconnect the power cord from a 12V cigarette lighter socket.
Product ID: 707129800176