Epica EP-1162 User manual
Coffee & Spice
Grinder
SAVE THIS BOOKLET FOR FUTURE REFERENCE.
Before operating this
coffee & spice grinder,
read, understand and
follow these instructions.
Owner’s
Manual
Model: EP-1162
Each day, new flavor experiences await
your discovery. The opportunity to
delight your senses and expand your
horizons. To embrace subtle mixes, full-
bodied roasts, and intriguing, complex
blends. The Epica™ Coffee & Spice
Grinder unlocks the aromatic potential
hidden within your ingredients, enriching
your life with fresh, authentic tastes.
IMPORTANT SAFEGUARDS
BEFORE FIRST USE
INSTRUCTIONS FOR USE
GRINDING GUIDE
CAUTION:
TYPE OF COFFEE MAKER GRIND FINENESS GRIND TIME
INSTRUCTIONS FOR USE
Before using your Epica Spice and Coffee Grinder for the rst time, wipe all parts with a
damp cloth. Allow to dry completely.
IMPORTANT SAFEGUARDS
BEFORE FIRST USE
INSTRUCTIONS FOR USE
GRINDING GUIDE
CAUTION:
TYPE OF COFFEE MAKER GRIND FINENESS GRIND TIME
IMPORTANT SAFEGUARDS
BEFORE FIRST USE
INSTRUCTIONS FOR USE
GRINDING GUIDE
CAUTION:
TYPE OF COFFEE MAKER GRIND FINENESS GRIND TIME
GRINDING GUIDE
1. Determine how many beans you need to grind. Start with 1 heaping tablespoon of
beans per (5-oz.) cup of water, and adjust to taste.
2. Do not leave leftover grounds in the grinder.
3. Use the chart below to choose the right neness and grind time for your coffeemaker.
Adjust as necessary for your desired results.
4. CAUTION: Using a ner grind than suited for your lter type can cause clogging and
overow from the coffeemaker.
5. Pulse the activation button rather than holding it down continuously, to prevent the
grounds from overheating and losing avor.
6. After 60 seconds of total grind time, stop and allow the grinder to cool off.
IMPORTANT SAFEGUARDS
BEFORE FIRST USE
INSTRUCTIONS FOR USE
GRINDING GUIDE
CAUTION:
TYPE OF COFFEE MAKER GRIND FINENESS GRIND TIME
*Boiler or steam type espresso machines. For pump espresso machines, Epica recommends a burr type grinder.
MAINTENANCE AND CLEANING
DO NOT IMMERSE THE MOTOR BASE IN WATER. DO NOT PUT ANY PARTS IN THE
DISHWASHER.
1. Before cleaning, unplug the appliance from the electrical outlet.
2. Hand wash the cover and stainless steel bowl/blade unit in warm, soapy water. Rinse
and dry completely.
3. Wipe the motor base exterior with a damp cloth or paper towel.
4. Any other servicing should be performed by an authorized service representative.
CONTACT INFORMATION
Epica Products
Brick, NJ
1-888-507-0576
www.epicaproducts.com
suppor[email protected]
Table of contents
