EPOS 3429 LIMITED EDITION User manual

EPOS REF. 3429 - LIMITED EDITION

EPOS REF. 3429 MANUAL - SWISS MOVEMENT UNITAS 6498
Please closely follow the instructions below in order to keep the watch
undamaged.
To extract the pocketwatch-container from the strap-case:
1. Unfasten the small 9H-crown (A) by screwing it counterclockwise
2. Unfasten the 3H-crown (B) by screwing it counterclockwise
3. Extract the pocketwatch-container when both crowns are fully
unfastened
You can now use the container as a pocket watch:
1. Please refasten both crowns as soon as the container is extracted
2. Fasten the small 9H-crown (A) by pushing it down and screwing it clockwise
3. Fasten the 3H-crown (B) by pushing it down and screwing it clockwise
Alternatively, you can use the container as a table watch:
1. Please refasten both crowns as soon as the container is extracted
2. Fasten the small 9H-crown (A) by pushing it down and screwing it clockwise
3. Fasten the 3H-crown (B) by pushing it down and screwing it clockwise
4. Expand the stand in the back of the container
To reinsert the pocketwatch-container into the strap-case:
1. Unfasten the small 9H-crown (A) by screwing it counterclockwise
2. Unfasten the 3H-crown (B) by screwing it counterclockwise
3. Make sure that both crowns are completely unfasten
4. Carefully insert the container into the strap-case. Make sure that the
container is kept perfectly straight

EPOS REF. 3429 MANUAL - SWISS MOVEMENT UNITAS 6498
You can now use it as a wristwatch:
1. Please refasten both crowns as soon as the container is reinserted
2. Fasten the small 9H-crown (A) by pushing it down and screwing it clockwise
3. Fasten the 3H-crown (B) by pushing it down and screwing it clockwise
4. Please make sure that the crowns are fully fastened to ensure a tight
t of the container. Otherwise, the container might fall out.
Handling and corrections: Manual winding
1. Unfasten the screwdown-crown by screwing it counterclockwise
2. Manual winding by screwing the crown clockwise
3. Fasten the screwdown-crown by pushing it down and screwing it clockwise
Handling and corrections: Time setting
1. Unfasten the screwdown-crown by screwing it counterclockwise
2. Pull out the crown to pos. 2 for time-setting
3. Time-setting by screwing the crown clockwise or counterclockwise
4. Pull in the crown to pos. 1
5. Fasten the screwdown-crown by pushing it down and screwing it clockwise
Functions
Display by means of hands: hours, minutes, small second
Technical specications
Round caliber 16½´´´
Manual winding
Power-reserve: max. 53 h
21’600 vibrations per hour (3 Hz)
Jewels: 17
Movement diameter: 37.20 mm
Movement height: 4.50 mm
© Copyright Epos Uhren AG, Switzerland, www.epos.ch