Epson EB 824 User manual

User’s Guide

Notations Used in This Guide
•Safety indications
The documentation and the projector use graphical symbols to show how to use the projector safely.
Please understand and respect these caution symbols in order to avoid injury to persons or property.
Warning
This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution
This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
•General information indications
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
q
Indicates additional information and points which may be useful to know regarding a topic.
sIndicates a page where detailed information regarding a topic can be found.
g Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms. See the
"Glossary" section of the "Appendix". sp.102
Procedure
Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbered steps.
[ (Name) ] Indicates the name of the buttons on the Remote Control or the Control panel.
Example: [Return] button
"(Menu Name)"
Brightness
Indicates Configuration Menu items.
Example:
Select "Brightness" from the Image menu.
Image menu - Brightness

Notations Used in This Guide.......................... 2
Introduction
ProjectorFeatures........................................... 7
FeaturesCommontoEachModel.................................... 7
Easytohandle...............................................7
Enhancedsecurityfunctions......................................7
EB-826W/825/85 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Takingfulladvantageofanetworkconnection.........................8
ProjectingJPEGimageswithoutconnectingacomputer..................8
PartNamesandFunctions.................................... 9
Front/Top....................................................9
Rear.......................................................10
Base.......................................................11
Controlpanel.................................................12
RemoteControl...............................................13
Useful Functions
Changing the Projected Image............................... 16
Automatically Detect Input Signal and Change the Projected Image (Source Search)
..........................................................16
SwitchtothetargetimagebyRemoteControl..........................17
Functions for Enhancing Projection.......................... 18
SelectingtheProjectionQuality(SelectingColorMode)....................18
SettingtheAutoIris.............................................19
HidingtheImageandSoundTemporarily(A/VMute)......................19
FreezingtheImage(Freeze).......................................20
ChangingtheAspectRatio........................................20
Changingmethods...........................................20
ChangingtheAspectforvideoequipmentimages......................21
ChangingtheAspectforcomputerimages(EB-825/824/85/84).............22
ChangingtheAspectforcomputerimages(EB-826W)...................23
PointerFunction(Pointer)........................................25
EnlargingPartoftheImage(E-Zoom).................................26
OperatingtheMousePointerbyRemoteControl(WirelessMouse)............. 27
SecurityFunctions.......................................... 29
ManagingUsers(PasswordProtect)..................................29
TypeofPasswordProtect.......................................29
SettingPasswordProtect.......................................29
EnteringthePassword......................................... 30
RestrictingOperation(ControlPanelLock).............................31
Anti-TheftLock................................................ 32
Installingthewirelock......................................... 32
Configuration Menu
UsingtheConfigurationMenu............................... 34
ListofFunctions............................................ 35
ImageMenu..................................................35
SignalMenu.................................................. 36
SettingsMenu................................................37
ExtendedMenu...............................................39
Network Menu (EB-826W/825/85/84 only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
NotesonoperatingtheNetworkmenu.............................42
Softkeyboardoperations....................................... 42
BasicMenu.................................................43
Wireless LAN Menu (EB-826W/825/85 only). . . ........................44
SecurityMenu(EB-826W/825/85only)..............................45
WhenWEPisselected......................................... 46
WhenWPA-PSK(TKIP)orWPA2-PSK(AES)isselected....................46
WiredLANMenu.............................................47
MailMenu.................................................48
OthersMenu...............................................49
ResetMenu................................................50
InfoMenu(DisplayOnly).........................................51
ResetMenu..................................................52
Contents
3

Troubleshooting
UsingtheHelp.............................................. 54
ProblemSolving............................................ 55
ReadingtheIndicators........................................... 55
tIndicatorislitorflashingred...................................56
moIndicatorisflashingorlitorange..............................57
WhentheIndicatorsProvideNoHelp.................................58
Problemsrelatingtoimages..................................... 59
Problemswhenprojectionstarts.................................. 63
Otherproblems............................................. 63
Appendix
InstallationMethods........................................ 66
Cleaning................................................... 67
CleaningtheProjector'sSurface....................................67
CleaningtheLens..............................................67
CleaningtheAirfilter............................................67
ReplacingConsumables..................................... 68
ReplacingtheRemoteControlBatteries...............................68
ReplacingtheLamp.............................................69
Lampreplacementperiod......................................69
HowtoreplacetheLamp.......................................69
ResettingtheLampHours......................................72
ReplacingtheAirFilter...........................................72
Airfilterreplacementperiod..................................... 72
Howtoreplacetheairfilter......................................72
OptionalAccessoriesandConsumables....................... 75
Optionalaccessories............................................75
Consumables.................................................75
Saving a User's Logo........................................ 76
ScreenSizeandProjectionDistance.......................... 78
Projection Distance (EB-825/824/85/84). . ............................. 78
ProjectionDistance(EB-826W).....................................78
Connecting and Removing USB Devices (EB-826W/825/824/85
only)....................................................... 80
ConnectingUSBDevices.........................................80
RemovingUSBDevices..........................................81
Connecting with a USB cable and Projecting(USBDisplay)..... 82
Connecting.................................................. 82
Connectingforthefirsttime..................................... 83
Fromthesecondtime.........................................84
Connecting a LAN Cable (EB-826W/825/85/84 only). . . . . . . . . . . . 85
Installing the Wireless LAN Unit (EB-826W/825/85 only)........ 86
Connecting to External Equipment........................... 87
Connecting to an external monitor (EB-826W/825/85/84 only). . . . . . . . . . . . . . . . 87
Connectingtoanexternalspeaker(EB-826W/825/85/84only)................88
Connectingamicrophone........................................88
Reading Problem Mail Notification Function (EB-826W/
825/85/84 only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
ESC/VP21Commands....................................... 90
CommandList................................................90
CableLayouts.................................................90
SerialConnection............................................90
Communicationsprotocol...................................... 91
AboutPJLink............................................... 92
Supported Monitor Displays. ................................ 93
SupportedMonitorDisplays(EB-825/824/85/84).........................93
Computersignals(analogRGB)...................................93
ComponentVideo............................................94
Contents
4

CompositeVideo/S-Video.......................................94
SupportedMonitorDisplays(EB-826W)...............................95
Computersignals(analogRGB)...................................95
ComponentVideo............................................96
CompositeVideo/S-Video.......................................96
Specifications.............................................. 97
ProjectorGeneralSpecifications....................................97
SoftwareRequirement...........................................99
Appearance............................................... 101
Glossary.................................................. 102
GeneralNotes............................................. 104
GeneralNotice:............................................... 104
Index..................................................... 120
Contents
5

Introduction
This chapter explains the projector's features and the part names.

Features Common to Each Model
Easy to handle
•The A/V mute slide knob makes it easy to project and store
You can stop and resume projection easily by opening and closing the
A/V mute slide knob which makes giving clear presentations easier.
•A single foot design means you do not have to make any difficult
leveling adjustments
You can easily make height adjustments with one hand. sQuick
Start Guide
•No cool down delay
After turning the projector's power off, you can disconnect the
projector's power cable without having to wait for the projector to
cool down.
•Projection screen for WXGA (EB-826W)
With a computer that has a 16:10 WXGA wide LCD display, the
image can be projected in the same aspect. You can use whiteboards
and other landscape format screens.
•Enlarge and project your files with the Document Camera
A USB compatible Document Camera is available as an optional extra.
With this Document Camera there is no need for a power cable. You
can connect easily with one USB cable, and its clean design really
simplifies projecting and enlarging your documents.
•Connecting with a USB cable and Projecting (USB Display)
Simply by connecting the projector to a Windows Computer with the
supplied USB cable you can project images from the computer screen.
sp.82
Enhanced security functions
•Password Protect to restrict and manage users
By setting a Password you can restrict who can use the projector.
sp.29
•Control Panel Lock restricts button operation on the Control panel
You can use this to prevent people changing projector settings without
permission at events, in schools, and so on. sp.31
Projector Features
7

•Equipped with various anti-theft devices
The projector is equipped with the following types of anti-theft
security devices. sp.32
•Security slot
•Security cable installation point
EB-826W/825/85 Features
Taking full advantage of a network connection
You can make effective use of your network by using the supplied
"EPSON Projector Software for Meeting & Monitoring" to perform
efficient and varied presentations and meetings. sProjector Operation
Guide
•Connect a Computer to the projector via a network
You can project by connecting to an already constructed network system.
You can hold efficient meetings by projecting from multiple computers
connected to a network system without having to change any cables.
•Connecting wirelessly to a computer
When you install the optional wireless LAN unit in the projector, you
can connect wirelessly to a computer.
•Connection method for various networks
The following methods are available for connecting the projector to a
network. Select whichever method suites your environment.
sProjector Operation Guide
•Advanced Connection Mode
Advanced Connection Mode is an infrastructure connection, offering
you a method of connecting to an already constructed network.
•Quick Connection Mode
Quick Connection Mode is a connection method that can only be
executed when the optional wireless LAN unit is installed.
Quick Connection Mode temporarily allocates the projector's SSID
to the computer in ad-hoc mode, and restores the computer's net‐
work settings after disconnecting.
•Network connection using Quick Wireless Connection USB Key
Using the optional Quick Wireless Connection USB Key, you can
quickly connect a computer to the projector for projection.
Projecting JPEG images without connecting a computer
You can project a slideshow of JPEG images saved on a USB device
such as a USB compatible digital camera, hard disk, or USB memory by
simply connecting to the projector. sProjector Operation Guide
Projector Features
8

Front/Top
Name Function
AAir exhaust vent Exhaust vent for air used to cool the projector internally.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust
vent and do not put your face or hands near the
vent while projection is in progress.
BRemote Receiver Receives signals from the remote control. sQuick
Start Guide
Name Function
CA/V mute slide knob Slide the knob to open and close the A/V mute slide knob.
DFoot adjust lever Pull out the Foot adjust lever to extend and retract the
Front adjustable foot. sQuick Start Guide
EFront adjustable foot Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
sQuick Start Guide
FA/V mute slide knob Slide shut when not using the projector to protect the
lens. By closing during projection you can hide the
image and the sound (A/V Mute). sQuick Start
Guide , sp.19
GAir intake vent
(Air filter)
Takes in air to cool the projector internally. If dust
collects here it can cause the internal temperature to
rise, and this can lead to problems with operation and
shorten the optical engine's service life. Be sure to clean
the Air filter regularly. sp.67, p.72
HAir filter cover open/
close switch
Opens and closes the air filter cover. sp.72
Open this cover when installing the optional Wireless
LAN unit.
ISecurity cable
installation point
Pass a commercially available wire lock through here
and lock it in place. sp.32
JSecurity slot The Security slot is compatible with the Microsaver
Security System manufactured by Kensington.
sp.32
KFocus ring Adjusts the image focus. sQuick Start Guide
LZoom ring Adjusts the image size. sQuick Start Guide
MControl panel sp.12
NLamp cover Open this cover when replacing the projector's Lamp.
sp.69
Part Names and Functions
9

Rear
Name Function
ARemote Receiver Receives signals from the remote control. sQuick
Start Guide
BSpeaker Outputs audio from the Mic Input Port and the image
currently being projected.
CMic Input Port Connects to a microphone. sp.88
DRS-232C Port When controlling the projector from a computer,
connect it to the computer with an RS-232C cable. This
port is for control use and should not normally be used.
sp.90
EPower inlet Connects to the power cable. sQuick Start Guide
FMonitor Out Port
(EB-826W/825/85/84
only)
Outputs to an external monitor the image signal from
the computer connected to the Computer1/2 input port.
This is not available for Component Video signals or
other signals being input to any port other than the
Computer1/2 input port. sp.87
Name Function
GAudio Out Port
(EB-826W/825/85/84
only)
Outputs the image currently being projected and audio
from the Mic Input Port to an external speaker.
sp.88
HLamp Cover Fixing
Screw
Screw to fix the Lamp cover in place. sp.69
IS-Video Input Port
Video Input Port
Audio-L/R input port
For S-video signals from video sources.
For composite video signals from video sources.
Connects to the audio out port when you want to output
audio from equipment connected to the S-Video Input
Port or the Video Input Port.
sQuick Start Guide
JComputer1 Input Port
Audio1 Port
For video signals from a computer and component
video signals from other video sources.
Connects to the audio out port when you want to output
audio from equipment connected to the Computer1
Input Port.
sQuick Start Guide
KComputer2 Input Port
Audio2 Port
For video signals from a computer and component
video signals from other video sources.
Connects to the audio out port when you want to output
audio from equipment connected to the Computer2
Input Port. Also, when you want to output audio from
the projector for the following Sources, connect the
audio source to the Audio2 port.
- USB: When playing back a Slideshow from a USB
storage device connected to USB port (TypeA), or when
projecting from the optional Document Camera
- USB Display
- LAN
sQuick Start Guide
Part Names and Functions
10

Name Function
LUSB indicator
(EB-826W/825/824/85
only)
The following explains the status of USB devices
connected to USB port. (TypeA).
OFF: USB device is not connected
Orange Light ON: USB device is connected
Green Light ON: USB device is operating
Red Light ON: Error
MUSB Port (TypeA)
(EB-826W/825/824/85
only)
Projects a JPEG image Slideshow when memories or
digital cameras are connected to the USB compatible
port. sProjector Operation Guide
Also when the optional Document Camera is connected.
NUSB Port (TypeB) Connects the projector to a computer via the supplied
USB cable, and the image on the computer is projected.
sp.82
Also use this port to connect to a computer via the
supplied USB cable to use the wireless mouse function.
sp.27
OLAN Port
(EB-826W/825/85/84
only)
Connects to a LAN cable and then to a network.
sp.85
Base
Name Function
ACeiling mount fixing
points
(3 points)
Attach the optional Ceiling mount here when
suspending the projector from a ceiling. sp.66,
p.75
BRear foot When setup on a desk, turn to extend and retract to
adjust the horizontal tilt. sQuick Start Guide
Part Names and Functions
11

Control panel
Name Function
AStatus indicators The color of the indicators and whether they are flashing
or lit indicate the status of the projector. sp.55
B[t] button Turns the projector power on or off. sQuick Start Guide
C[Source Search]
button
Changes to the next input source that is connected to
the projector and is sending an image. sp.16
D[Enter] button If pressed during projection of computer signal images,
it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
When a Configuration Menu or a Help screen is
displayed, it accepts and enters the current selection and
moves to the next level. sp.34
Name Function
E[w][v] button Corrects Keystone distortion. In the following cases,
however, these buttons only have the [ ] and [ ]
functions.
- When the projected image is being sent through a
Network connection
- When the Slideshow function is being used for
projection
If pressed when a Configuration Menu or a Help screen
is displayed, these buttons select menu items and setting
values. sQuick Start Guide , p.34
F[Help] button Displays and closes the Help screen which shows you
how to deal with problems if they occur. sp.54
G[Return] button Stops the current function.
If pressed when a configuration menu is displayed, it
moves to the previous menu level. sp.34
H[a][b] button Adjusts the volume. If pressed while a Configuration
Menu or a Help screen is displayed, these buttons only
have the [ ] and [ ] functions which select menu
items and setting values. sQuick Start Guide , p.34
I[Menu] button Displays and closes the Configuration Menu.
sp.34
Part Names and Functions
12

Remote Control Name Function
A[t] button Turns the projector power On or Off. sQuick Start
Guide
B[Computer] button Each time the button is pressed, the image changes from
the Computer1 input port to the Computer2 input port.
sp.17
C[Video] button Each time the button is pressed, the image changes from
the Video input port to the S-Video input port.
sp.17
DNumeric buttons Use when entering a password. sp.29
E[A/V Mute] button Turns the video and audio on or off. sp.19
F[Freeze] button Images are paused or unpaused. sp.20
G[Auto] button If pressed during projection of computer signal images,
it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
H[Aspect] button The Aspect Ratio changes each time the button is
pressed. sp.20
I[Page] buttons
(Up) (Down)
Moves the Page Up/Down when using the Wireless
Mouse function, or projecting a PowerPoint file or a
scenario from LAN as the Source. The LAN Source is
only available on the EB-826W/825. sp.27, Projector
Operation Guide
J[E-Zoom] buttons
(z)(x)
(z) Enlarges the image without changing the projection
size.
(Reduces parts of images that have been enlarged using
the (x) [z] button. sp.26
K[Menu] button Displays and closes the Configuration Menu. sp.34
L[][ ]
[][ ] button
When a Configuration Menu or Help screen is
displayed, it selects menu items and setting values.
sp.34, p.54
During Wireless Mouse function, the mouse pointer
moves in the direction the button is pushed. sp.27
Part Names and Functions
13

Name Function
M[Enter] button When a Configuration Menu or a Help screen is
displayed, it accepts and enters the current selection and
moves to the next level. sp.34, p.54
Acts as a mouse's left button when using the Wireless
Mouse function. sp.27
N[Return] button Stops the current function. If pressed when a
Configuration Menu is displayed, it moves to the
previous level. sp.34, p.54
Acts as a mouse's right button when using the Wireless
Mouse function. sp.27
O[Volume] buttons (a)
(b)
(a) Decreases the Volume.
(b) Increases the Volume.
sQuick Start Guide
P[Pointer] button Press to activate the on screen Pointer. sp.25
Q[Help] button Displays and closes the Help screen which shows you
how to deal with problems if they occur. sp.54
R[Color Mode] button Each time the button is pressed, the Color Mode
changes. sp.18
S[Num] button Use when entering a Password. sp.29
T[User] button Press to assign a frequently used item from the five
available Configuration Menu items. By pressing the
button the assigned menu item selection/adjustment
screen is displayed, allowing you to make one-touch
settings/adjustments. sp.37
Brightness Control is assigned as the default setting.
U[USB] button Each time the button is pressed, it changes to the image
from equipment connected to USB Display/USB port
(TypeA). Only changes to USB Display when using the
EB-84. sp.17
Name Function
V[LAN] button Changes to the EMP NS Connection image.(EB-826W/
825/85 only) sp.17
When using EB-824/84, this does not function even if
the button is pressed.
W[Search] button Changes to the next input source that is connected to
the projector and is sending an image. sp.16
XRemote control
light-emitting area
Outputs remote control signals.
Part Names and Functions
14

Useful Functions
This chapter explains useful tips for giving presentations, and the Security functions.

You can change the projected image in the following two ways.
•Changing by Source Search
The projector automatically detects signals being input from connected
equipment, and the image being input from the equipment is projected.
•Changes to the target image.
You can use the Remote Control buttons to change to the target
input port.
Automatically Detect Input Signal and Change
the Projected Image (Source Search)
You can project the target image quickly as input ports with no image
signal being input are ignored when you change by pressing the [Source
Search] button.
AComputer1
BComputer2
CS-Video
DVideo
EUSB Display
FUSB: When image is from a device connected to USB Port (TypeA).
GLAN: When the projector is connected to a computer via a
network, and images from EMP NS Connection are projected.
Skipped when no image signal is being input.
Only EB-826W/825/824/85 can switch to USB.
Only EB-826W/825/85 can switch to LAN.
Procedure
When your video equipment is connected, start playback before
beginning this operation.
Using the Remote Control Using the Control panel
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
Changing the Projected Image
16

q
The following screen showing the status of image signals is
displayed when only the image that the projector is currently
displaying is available, or when no image signal can be found. You
can select the input port where the equipment you want to use is
connected. If no operation is performed after about 10 seconds, the
screen closes.
USB is only displayed for EB-826W/825/824/85.
LAN is only displayed for EB-826W/825/85.
Switch to the target image by Remote Control
You can change directly to the target image by pressing the following
buttons on the Remote Control.
Remote Control
AEach time the button is pressed, the image changes from the Computer1
input port to the Computer2 input port.
BEach time the button is pressed, the image changes from the Video input
port to the S-Video input port.
CEach time the button is pressed, it changes to the image from equipment
connected to USB Display/USB port (TypeA). Only changes to USB
Display when using the EB-84.
DWhen the projector is connected to a computer via a network, you can
switch to images projected from EMP NS Connection.(EB-826W/825/85
only)
When using EB-824/84, this does not function even if the button is pressed.
Changing the Projected Image
17

Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting
the setting that best corresponds to your surroundings when projecting.
The brightness of the image varies depending on the mode selected.
Mode Application
Dynamic Ideal for use in a bright room. This is the brightest
mode, and reproduces shadow tones well.
If you are worried about image delays during
projection for games involving speed, try turning off
Progressive in the Configuration Menu. sp.36
Presentation Ideal for making presentations using color materials in
a bright room.
Theatre Ideal for watching films in a dark room. Gives images
a natural tone.
Photo (When the computer image input and the Source are
USB or LAN.)
Ideal for projecting still pictures, such as photos, in a
bright room. The images are vivid and brought into
contrast.
Sports (When Component Video, S-Video, or composite
video images are input)
Ideal for watching TV programmes in a bright room.
The images are vivid and brought to life.
sRGB g
Ideal for images that conform to the sRGB color
standard.
Blackboard Even if you are projecting onto a Blackboard
(greenboard), this setting gives your images a natural
tint, just like when projecting onto a screen.
Whiteboard Ideal for making presentations using black-and-white
materials in a bright room.
Procedure
Remote Control
Each time you press the button, the Color Mode name is displayed on
the screen and the Color Mode changes.
If you press the button while the Color Mode name is displayed on the
screen, it changes to the next Color Mode.
q
The color mode can also be set using Color Mode in the Image
menu from the Configuration Menu. sp.35
Functions for Enhancing Projection
18

Setting the Auto Iris
By automatically setting the luminance according to the brightness of
the displayed image, it lets you enjoy deep and rich images.
Procedure
A Press the [Menu] button and select Image - Auto Iris from
the Configuration Menu. s"Using the Configuration Menu"
Using the Remote Control Using the Control panel
B Select On.
The setting is stored for each Color Mode.
C Press the [Menu] button to close the Configuration Menu.
q
Auto Iris can be set only when the Color Mode is Dynamic or
Theatre.
Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to focus the audience's attention on
what you are saying, or if you do not want to show details such as
when you are changing between files during presentations from a computer.
Procedure
Remote Control Body
Each time you press the button, or open/close the lens cover A/V Mute
turns on or off.
q
•If you use this function when projecting moving images, the
images and sound continue to be played back by the source, and
you cannot return to the point where A/V Mute was activated.
•You can choose to display Black, Blue, or Logo as the A/V
Mute display using the Extended - Display - A/V Mute setting
from the configuration menu. sp.39
•When the A/V mute slide knob is closed, or when no operations
are made for approximately 30 minutes, Sleep Mode activates and
the power is automatically turned off. If you do not want Sleep
Mode to activate, change the Lens Cover Timer setting to Off
from Operation in the Extended menu. sp.39
Functions for Enhancing Projection
19

Freezing the Image (Freeze)
When the moving image on the screen is frozen, the image continues
to project, so you can project a moving image one frame at a time like
a still photo. Also, you can perform operations such as changing
between files during presentations from a computer without projecting
any images if the freeze function is activated beforehand.
Procedure
Remote Control
Each time you press the button, Freeze turns on or off.
q
•Audio does not stop.
•The image source continues to play back the moving images
even while the screen is frozen, and so it is not possible to
resume projection from the point where it was paused.
•If the [Freeze] button is pressed while the Configuration Menu
or a Help screen is displayed, the menu or Help screen being
displayed is cleared.
•Freeze still works while E-Zoom is being used.
Changing the Aspect Ratio
Change the Aspect Ratio g when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the Aspect Ratio when
projecting computer images at full size.
The changing methods and the types of Aspect ratio are as follows.
Changing methods
Procedure
Remote Control
Each time you press the button, the Aspect name is displayed on the
screen and the Aspect changes.
If you press the button while the Aspect name is displayed on the
screen, it changes to the next Aspect Mode.
q
The color mode can also be set using Aspect in the Signal menu
from the Configuration Menu. sp.36
Functions for Enhancing Projection
20