ErgoCentric upCentric User manual

75x75, 100x100
17-29"
KG
LBS
1-6 KG/2.2-13.2 LBS
Parts
1
M4X12mm screws
(X4)
Mini slider
(X1)
Allen wrench
(X2)
M4X9mm screws
(X4)
VESA plate
(X1)
(5mm)
(4mm)
spacer
(X1)
Connecting screw
(X1)
Remove the original VESA mount
Loosen the connecting screw.
Loosen
Take down the original VESA
mount component.
2
Install the mini slide
Insert the mini slide. Tighten the connecting screw.
Place the metal spacer
Tighten
3
Assembly instructions
Monitor sliders

Adjustment on the mini slide
3 positions for connection
7
6
Connect VESA plate with monitor
M4X9 screw is the default VESA screw
size for most monitors and is designed
to be hand-tightened.
M4X12 screw is provided to accommodate
monitors requiring longer VESA screws.
Monitor installation
4
5
Slide in and lock-in.
Before slide in, please make sure
the knob on the VESA plate is vertical.
Then turn the knob to
right to lock and fix the
VESA plate. Original position Left position Right position
Monitor sliders