NOTE: Jabra Wireless Headset need to be adjusted to RHL model
The following information shows the Bluetooth setting.
To activate the Bluetooth mode via phone user interface
Press Menu>System Settings>Advanced Settings>Password(Default is
empty)>Bluetooth
Press OK or Enter soft key to select On from the Bluetooth field.
Before pairing Bluetooth headset, check the indicator on the Bluetooth
headset to make sure the Bluetooth headset is discoverable. And then, press
"Search Bluetooth Devices" to search the Bluetooth devices.
Select the desired Bluetooth headset and press Connect soft key.
After a while, the Bluetooth headset is automatically connected to your IP
Phone. The Bluetooth information will display on the LCD screen.
To view the Bluetooth headset information
Press Menu>System Settings>Advanced Settings>Password(Default is
empty)>Bluetooth>Active device
Device name: the name of the Bluetooth headset.
MAC Address: the MAC address of the Bluetooth headset.
Bluetooth Status: the Status of the Bluetooth headset.
Shut Soft Key: Disconnect Bluetooth headset.
To manage your Bluetooth headset from your IP Phone
Press Menu>System Settings>Advanced Settings>Pas
empty)>Bluetooth>Paired Devices List
You can Delete or re-Connect your Bluetooth headset from your IP Phone.
ESCENE COMMUNICATION CO.,LTD.
Web: http://www.escene.cn/en
Address: Floor 4 Building C YueAn Industrial Park No.51 Huangcun Road Tianhe
District Guangzhou China
Bluetooth and Wireless Headset Adapter Module
BWM36 Quick User Guide
BWM36 is Integrated with the Bluetooth, Wireless headset adapter and USB
charging. It can compatible with 3xx/4xx/6xx series IP Phone, the hardware/software
version must exceed Rev 2.3.0/3.2.0.0. BWM36 is easy to use, free of installation, PNP.
It has low cost, stable performance and powerful function.
NOTE: Bluetooth and Wireless Headset feature cannot be used at the same time.
RJ45 Cord 1
3.5mm-RJ45 Cord 1
RJ9 Cord 1
Quick User Guide 1
