Escort entourage PS User manual

Quick Start Guide
GPS vehicle security, recovery
and location awareness

Welcome!
Thank you for purchasing the ESCORT® Entourage™ PS
vehicle security & GPS locator system powered by Blackline
GPS™.
To get started, please follow these steps:
Step 1: Begin charging your Entourage PS by plugging it into
the wall charger or vehicle charger cable. Allow up to
five hours for a complete charge.
Step 2: Visit: www.EscortInc.com/Start
Step 3: Create a network account, or log in to your existing
network account
Step 4: Activate your Entourage PS system within your
account using the unit ID and activation code
provided on the enclosed Activation Card
Your Entourage PS will be active and ready to use
within eight hours of activation.
Step 5: To get the most out of your Entourage PS, while
waiting for activation, take some time to configure
your custom security alert and notification settings
within your account
A detailed Entourage PS User Guide is available within your
network account.

Need help?
For helpful resources, please visit:
www.BlacklineGPS.com/Support
Helpful information is also available within your network
account, located on the Help page.
If you have any questions or comments, please contact
Blackline GPS Customer Care:
www.BlacklineGPS.com/Contact

Legal Notices
ESCORT and the ESCORT logo are trademarks and/or registered trademarks of Escort, Inc., in the U.S., Canada, and/or other countries and used under license. © Copyright 2009 Blackline GPS Corp. All rights reserved.
Information in this document is subject to change without notice. Blackline GPS reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization
of such changes or improvements. Visit the Blackline GPS Web site (www.BlacklineGPS.com) for current updates and information concerning the use and operation of this and other Blackline GPS products.
The Blackline GPS families of related marks, images and symbols, including Entourage CIS, MyPass, and Blackline GPS are the exclusive properties and trademarks of Blackline GPS Inc. All other brands, product names, company
names, trademarks and service marks are the properties of their respective owners.
This document is provided“as is,”and Blackline GPS Inc. (“Blackline GPS or Blackline”) and its affiliated companies and partners assume no responsibility for any typographical, technical or other inaccuracies in this document.
Blackline GPS reserves the right to periodically change information that is contained in this document. However, Blackline GPS makes no commitment to provide any such changes, updates, enhancements or other additions to
this document to you in a timely manner, or at all.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate
the equipment.
FCC RF Exposure statement
This device is only authorized for use in Mobile applications. At least 20cm (8 inches) of separation between the antenna and the user’s body must be maintained at all times.This Class B digital apparatus complies with Canadian
ICES-003.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•Consult the dealer or an experienced radio/TV technician for further assistance
DOC-0058-AA