ESTELLE ESMPRHRDRYA User manual

MOISTURE PROTECT HIGH
SPEED IONIC HAIR DRYER
ESMPRHRDRYA

Safety Precautions
To reduce the risk of malfunction, electric shock injury, fire death and equipment or property
damage, please be sure to observe the following safety precautions.
•Do not use when the power cord or plug is damaged or hot.
•Do not use when the power plug inserted into the socket is loose.
•Do not damage or modify or forcefully bend, pull, or twist the power cord. In
addition, do not place heavy objects or squeeze the power cord.
•Do not use it with the power cord bundled.
•Do not leave the appliance unattended when powered on.
•Do not connect the power plug to or unplug from the household power socket
when your hands are wet.
•Do not use with wet hands.
•Do not use near liquefied petroleum gas or other flammable products (such as
volatile agents, paints thinners, sprays, etc.).
•Do not block or insert foreign objects such as hairpins into the air outlet, air inlet
and ion-poor emitter.
•Do not place or store near the bathroom, sink, water, or other places filled with
liquids and high humidity.
•Do not wrap the power cord around the body and handle during storage.
•Do not store it within the reach of children and infants, and do not allow children or
infants to play with the appliance.
•Do not repair, disassemble, or modify the hair dryer yourself. When repairs are
needed please contact the kogan.com.
•Do not soak the hair dryer in water
•Do not use this hair dryer in the bath or shower. Do not use this hair dryer near a
bathtub, shower basin or other vessels containing water.
•In the event of an abnormality or failure, please stop using it immediately, unplug
the power supply, and contact kogan.com.
•Clean the power plug regularly to prevent dust accumulation. Disconnect the
power plug and wipe with a dry cloth.
SAFETY & WARNINGS

•When unplugging the power plug, do not pull the power cord; always pull it out by
holding the power plug.
•Fully insert the power plug. Please use the socket alone; do not use a power
terminal block.
•When the hair dryer blows hot air, if you see sparks at the air outlet, please stop
using it and remove the dust attached to the outlet and the air outlet
•After use, please be sure to set the power switch to the [0] position and pull out the
power plug from the socket
•This product must be installed and fixed in a place that cannot be touched during
bathing
•To protect your safety, it is recommended to install a leakage protection device
(RCD) with a rated leakage action current not exceeding 30 mA in the electrical
circuit of the bathroom power supply and consult the RCD installer
•If the power cord is damaged, to avoid danger, it must be replaced by kogan.com.
•Properly dispose of the packaging bag and power plug protection of this product to
keep it away from babies.
•This product is not suitable for use by persons with physical, sensory, or mental
disabilities or persons who lack experience and knowledge (including children). A
guardian must supervise and guide the use of this product and be responsible for
the safety of the user.
•Avoid dropping the hair dryer or subjecting the hair dryer to strong shocks, which
can cause electric shock or fire.
•During use, the air outlet and nozzle may become hot, please do not touch it with
your hands.
•Do not use it when the air inlet is damaged.
•Do not use on babies.
•Please use it only for blow-drying and styling. Do not use it for pets or blow-drying
clothing.
•Please keep more than 10 cm between the air inlet and your hair.
•Please keep more than 6cm between the air outlet and the hair.
This hair dryer comes with an overheating protection device, which can automatically
switch to cold air when the temperature of the hair dryer is too high.
When this occurs, it is recommended to immediately turn off the power switch and unplug
the plug from the power socket, let it cool down for a few minutes before using it. Check
that there is no thread or hair at the air inlet and outlet and then turn on the power switch.

Magnetic modelling nozzle
OVERVIEW
Circular air outlet
Wind speed
adjustment button
Handle
Power cable
Mode button/indicator

Steps for usage
Before using this product, check the air inlet and outlet to ensure that they are not blocked
by fluff, hair, or other items.
Plug in the power cable, and the four-color mode indicator light will flash cyclically and
enter the standby mode.
Lightly press the mode button to select the appropriate mode according to the needs of
care. Press and hold the mode button for 2 seconds to shut the appliance down. Flick the
wind speed adjustment key up and down to adjust the appropriate wind speed.
INSTRUCTION
Wind speed adjustment button
Mode button/indicator
Blue – Cold wind mode
Green (60 degrees) – Scalp mode
Green (80 degrees) – Regular mode
Red (100 degrees) – Quick-drying mode

Modelling nozzle installation and removal
Move the modelling air nozzle near the circular air outlet and the magnetic air nozzle will
automatically be magnetised to the air outlet. The nozzle can rotate freely in 360 degrees.
Simply remove the modelling air nozzle from the circular air outlet to detach.
INSTALLATION

•Unscrew the first layer of air intake grille in an
anticlockwise direction.
•Use a paper towel or toothbrush to remove dust, hair,
and other attachments from the air inlet.
•Do not press or rub the air inlet with your nails or
sharp objects to avoid damage.
•Use paper towel or a toothbrush to remove dust, hair,
and other attachments on the first layer of mesh
cover, or rinse with water to drain.
CLEANING & CARE
First layer of air
intake grille
Second layer of
air intake grille
Please clean the air inlet at least once a month
Note:
•Clean the hair dryer when it gets dirty. Use a soft cloth slightly dampened
with tap water or soapy water to clean the case.
•When storing the hair dryer, if there are still hair care products or cosmetics
sticking to the handle or body it may degrade the plastic, causing
discoloration, cracking and malfunction.

Default
Possible reason
Corrective Action
During the operation of hot air, cold
air is often present. Sparks may
appear.
(The spark is caused by the action of
the thermal switch as a protection
device and is not dangerous)
When the air inlet and
outlet are blocked by dust,
the thermal switch will be
activated, and cold air will
often be blown out during
activation.
The air inlet is blocked by
hair, hands, etc.
Remove the
accumulated dust.
Do not block the air
inlet.
The hot air is overheating
abnormally.
The power plug is abnormally
overheated.
The socket to which the
product is connected may
be loose.
Please use a socket that
is not loose
The air output is intermittent.
The power cord is abnormally
overheated.
The power cord is
damaged.
Discontinue use
immediately and
contact kogan.com.
There is no wind during the
operation of the product and the
interior is red.
Discontinue use
immediately and
contact kogan.com.
There are abnormal sounds and
vibrations during the use of the
product.
The product body and handle are
overheated abnormally.
The product body and handle are
deformed.
There is a burring smell during use.
If you are unable to resolve the issue using the above methods, please contact kogan.com
Rated input: 220V-240V ~AC 50Hz
Rated power: 1800W (350-1800W)
Cable length: 1.8m
TROUBLESHOOTING
SPECIFICATIONS

NOTES

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com