ESTELLE ESHRDYRHSIA User manual

HIGH SPEED PRO HAIR
DRYER
ESHRDYRHSIA

Read all instructions in this guide before using this product. Retain this guide for future
reference. Do not skip, substitute or modify any steps or procedures in this guide, as doing
so could result in personal injury or product damage.
• This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the product in a safe
way by the person responsible for their safety, and understand the hazards involved.
• Do not block the air inlet or place the air inlet facing down during operation. Doing so
may cause the heating wire to overheat and ignite.
• Do not immerse the hair dryer in water or any other liquids.
• Do not use the hair dryer in a humid environments.
• To avoid potential damage and electric shock, do not expose the hair dryer to water or
operate it with wet hands.
• To prevent the risk of fire or explosion from a short circuit, avoid using the hair dryer near
any flammable substances such as petrol, paint, thinners, spray, etc.
• Avoid wrapping the power cord around the main body of the product, as this can lead
to the power cord breaking, and increase the risk of electric shock or fire due to a short
circuit.
• Avoid storing the product in a highly humid environment to prevent the risk of electric
shock or fire due to a short circuit.
• Keep the product out of the reach of children and infants.
• Do not attempt to repair, disassemble, or modify the product on your own, as this can
lead to injury due to improper operation or fire hazards.
SAFETY & WARNINGS
WARNING: To avoid accidental injuries such as electric shock and fire
caused by improper use, be sure to observe the following safety
precautions!
WARNING: Do not use this product near a bathtub, shower, wash
basins or liquid filled vessels.

• For added protection, it is recommended to install a residual current device (RCD) with
a rated residual working current not exceeding 30mA in the bathroom power supply
electrical circuit.
• During use, the air outlet and nozzle may become hot, do not touch it with your hands
or it may cause burns.
• This product is not suitable for infants or young children.
• Always unplug the hair dryer from the outlet after using it.
• Do not unplug by hair dryer by pulling on the power cord, instead grasp the plug.
• Avoid forcefully pulling the power cord to prevent it from breaking, causing electric
shock or fire due to short circuit.
• Use the hair dryer solely for its intended purpose of drying hair. Do not use it to dry
shoes or articles of clothing.
• Ensure to use the hair dryer only with an electrical outlet that is compatible with its
power rating of 220V.
• Do not use universal plugs or voltage converters to avoid potential dangers.
• When storing the hair dryer, avoid wrapping the power cord around the main body of
the product to prevent damaging the power cord, which can cause electric shock or fire
due to a short circuit.
• If this product or its power cord shows any signs of damage cease use immediately and
contact help.Kogan.com for support.

OVERVIEW
Air outlet
Warm air
Hot air
Indicator
Cold air
Temperature
control button
Cold shot button
Power switch
Air inlet
Airflow control
button

Turning the Hair Dryer On/Off
• Slide the power switch up to turn the hair dryer ON.
• Slide the power switch down to turn the hair dryer OFF.
• This hair dryer has an Auto Shut Off feature and will automatically turn off after 10
minutes of continuous operation.
Attaching/Removing the Nozzle
• This product is equipped with a magnetic nozzle for easy attachment and removal.
• The nozzle can be rotated 360°.
• Ensure the hair dryer is off when attaching or removing the nozzle.
Note:To avoid burns, do not adjust or remove the nozzle during operation. Allow the
nozzle to cool down before handling.
Airflow Control
• The first time using the hair dryer, the airflow is set to level 1.
• Each time the Airflow Control Button is pressed, the hair dryer cycles through the three
airflow levels (1 à2 à3 à1).
• Upon restarting, the hair dryer will automatically resume its airflow level from the
previous use.
• The indicator brightness will change depending on the airflow level.
o Level 1 – Dark
o Level 2 – Dimmed
o Level 3 – Bright
OPERATION

Temperature Control
• Each time the Temperature Control Button is pressed, the hair dryer cycles through the
three temperature levels (COLD àWARM àHOT àCOLD).
• Upon restarting, the hair dryer will automatically resume its temperature level from the
previous use.
• The indicator colour will change depending on the temperature level.
o COLD – Blue
o WARM – Purple
o HOT – Red
Reverse Auto-cleaning
This hair dryer features a reverse auto-cleaning function. The motor spins in reverse to clean
the internal components.
1. To enable the auto-cleaning function, use the temperature control button to set
the temperate to cool (indicator is blue).
2. Press and hold the airflow control button for 3 seconds. The airflow will stop and
the indicator will begin flashing.
3. Press and hold the cold shot button for 3 seconds.
4. The hair dryer will start reverse auto-cleaning for 5 seconds.
5. To reactivate auto-cleaning, press and hold the shot button for 3 seconds.
6. Press the airflow control button to return to normal function.
Cold Shot
The Cool Shot feature of the hair dryer releases a stream of cool air. It is recommended to
use this function at the end of your drying session to set your hairstyle and achieve a shiny
finish.
1. Press and hold the cold shot button to instantly switch to cold air.
2. Release the button to resume at the previously set temperature.

• Before cleaning, ensure that the power switch is turned off and hair dryer has been
unplugged from the electrical outlet.
• Do not use any corrosive liquids such as alcohol, nail polish remover or detergent to
clean this product. Doing so may damage this product or cause malfunction.
Cleaning the Filter
• Remove the filter cover by pulling it downwards.
• Use a dry lint-free cloth, cotton swab or soft brush to remove any dust, hair or debris
from the filter cover and the stainless-steel mesh filter.
• Do not press or rub the stainless-steel air inlet filter with fingernails or sharp objects.
• After cleaning, install the filter cover back to its original position.
• Clean the filter at least once a month.
• Do not operate the hair dryer with the filter cover removed.
CLEANING & CARE
Filter cover
Mesh filter

Rated power
1500W
Rated voltage
220V~
Rated frequency
50Hz
Dimensions
255 x 98.5 x 76.5mm
SPECIFICATIONS

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com