Etac Hi-Loo User manual

Etac Hi-Loo & Supporter
Manual
74949N 17-06-14
8030 1116-2 / 8030 1117-2 / 8030 1118-2 / *8400 1291 / *8400 1292
8030 1114-2 / 8030 1115-2
8030 1316-2 / 8030 1317-2 / 8030 1318-2 / *8400 5099 / *8400 5100
8400 1299 / 8400 1322
8030 1106 / 8030 1107
8030 3012-2 / *8400 1293
8030 3112-2 / *8400 5101
8030 3018-2 / *8400 1294
8400 1297 / 8400 1298
en *Spare part, only armrest
x 2
x 2
x 2
x 1
x 1
x 2 x 2
x 2
x 2
x 2
x 2
x 2
x 1
x 1
x 2
x 1
x 2 x 2
x 1
x 1
x 2
x 2
x 2
x 2 x 2
x 2
x 1x 1
x 2
x 2
x 1
x 1
x 2
x 2
x 2 x 2 x 2
x 1
x 1 x 2
x 2
x 2
x 2 x 2
x 1
x 1
x 2
x 2
x 2
x 2 x 2 x 2
x 1
x 1

2
Etac / Hi-Loo & Supporter / www.etac.com
A
B
Hi-Loo Supporter
min. 355 mm
click
MAX
Alt.
B1 B2 B3 B4
B5
B5
B6 B6
B5
B5
8030 1106 / 8030 1107

3
C
D
E
x 2
1
1 2 3 4
2
PH2
ca: 10 mm
A
B C
Supporter 600 mm 490 mm 365 mm 220 mm 285 mm 250 mm 460 mm 4,8 kg
Supporter adj. 620/513 mm 512/336 mm 365 mm 220 mm 285 mm 240/310/375 mm 460 mm 4,8 kg
Hi-Loo 6 cm 600 mm 490 mm 365 mm 195 mm 270 mm 230 mm 460 mm 4,9 kg (2,6 kg*)
Hi-Loo 10 cm 600 mm 490 mm 365 mm 195 mm 270 mm 230 mm 460 mm 5,8 kg (3,4 kg*)
F

5
English
en
Intended use
Hi-Loo is a range of ergonomic toilet seat raisers
that facilitates sitting down and getting up from the
toilet. Hi-Loo can be used with or without armrests.
Armrests provide greater security when seated and
support when you sit down/get up from the toilet.
The armrests can be flipped up, but can also be fixed
in the lowered position.
Supporter is a range of toilet armrests that facilitates
sitting down and getting up from the toilet. The
armrests provide greater security when seated and
support when you sit down/get up from the toilet.
The armrests can be flipped up, but can also be fixed
in the lowered position.
Guarantee, service life
5-year guarantee against material and manufactur-
ing defects. For terms and conditions, see www.
etac.com.
Service life 10 years. For complete information
regarding the service life of the product, see www.
etac.com.
Symbols..............................................
Figure A
The toilet chair must be securely fixed in place / The
product must be fitted at the centre of the toilet
chair / The seat ring (Hi-Loo) can be removed when
cleaning. Make sure it clicks in place completely
when refitting / Maximum user weight 150 kg* /
The armrests have each been tested and approved
for half of the maximum user weight. / Clean the
product with a solvent-free detergent which has a
pH of 5-9, or with a 70% disinfectant solution. Can
be decontaminated at max. 85°C if so required.
*In order for the max. user weight 150
kg to be valid, both the porcelain attach-
ment and the armrests must be approved
for this weight (check the marking on
the product label and the label on the
armrest). Supporter adjustable, user
weight 130 kg.
Installation......................................... Figure B
For wall hung porcelain, mount armrests
before step 4.
Mounting armrest.............................. Figure C
Fixed armrest ..................................... Figure D
Height adjustable armrests................ Figure E
A. Height adjustment / B. Width adjustment /
C. Folding, fixing
Technical data.....................................
Figure F
*Without armrest
Accessories
• Adjustable armrest for Supporter
• Seat unit for angled Hi-Loo
• Complete bracket kit
• Crossbar
• Screw and fixing kit special Supporter
• Adjustment kit