
ETHOS
Overdrive
User’s Manual
Rev -
Power consumption = 35mAInternal Battery = 9 VDCBattery
When inactive, input signal is
buffered
Selects effect indicated by annunciation of yellow
LED
ACTIVE Footswitch
Turn CW to cut high frequenciesHi-Cut control, Allows Hi-end adjustment for given
applications
HC Control
Activates the guitar amp compensation circuit
when placed in the up position
GAC Switch
Selects between clean and overdrive channel
indicated by annunciation of red LED for Overdrive
and green LED for Clean
CHANNEL SELECT
Footswitch
Activates Boost mode in overdrive channel
indicated by annunciation of red LED
BOOST Footswitch
Center Pin (-) , 2.1mm x 5.5mm,
500mA adapter recommended
+12 VDC, external power jackPower Jack
Not applicable to Clean ChannelControls Overall Output Volume of OD channelVOLUME Control
Controls Hi-Frequency Response Post OD stagePRESENCE Control
Controls Bass Response in Preamp StageBASS Control
Controls Midrange Response in Preamp StageMIDDLE Control
Controls Treble Response in Preamp StageTREBLE Control
Jazz = Hi-Fi Style Tone Stack
Rock = Aggressive Mid-Range Tone Stack
JAZZ / ROCK Switch
Modern Mode = 80’s / 90’s Tone Stack
Classic = 70’s Tone Stack
MODERN / CLASSIC
Switch
Activate HF Boost in PreampBRITE Switch
Determines Gain Level of PreampGAIN Control
Speaker Simulator Output1/4 Inch, 1kohm Source ImpedanceSPK SIM OUT Jack
Normal Out1/4 Inch, 1kohm Source ImpedanceOUT Jack
Unit is powered when input plug is
inserted
1/4 Inch, 1Megohm Input Impedance,IN Jack
NotesDescriptionFeature
Page 3
Specifications: (Refer to Figure 2.)
Note: Specifications are subject to change without notice