3
2500235-04-07/20 (Translation of the original operating instructions)
Operating Instructions Bus Module
MBM-PN-..-MLI-… (PROFINET)
EN
11. Setup ................................................................................................................. 21
11.1. Overview of the communication data..............................................................................................21
11.2. Information on the data sheets enclosed ........................................................................................22
11.3. System layout and layout of the data areas in the control system .....................................................23
11.4. PROFINET data bytes....................................................................................................................25
11.5. PROFIsafe data bytes....................................................................................................................25
11.5.1. Data block for PROFIsafe...............................................................................................25
11.6. Integrating into PROFINET and PROFIsafe .......................................................................................26
11.7. Conguring and setting parameters for modules and submodules ....................................................27
11.7.1. Combining modules and submodules..............................................................................27
11.7.2. List of the parameters that can be set per module/submodule .........................................30
11.8. Replacing submodules ..................................................................................................................31
11.9. Replacing modules........................................................................................................................31
11.10. Saving conguration .....................................................................................................................31
12. Overview of data blocks for modules and submodules.......................................... 32
12.1. Data blocks for bus module MBM...................................................................................................32
12.1.1. Safe bits ......................................................................................................................32
12.1.2. Non-safe bits ................................................................................................................32
12.2. Data blocks for interlocking/locking module MGB2-I / MGB2-L .........................................................33
12.2.1. Safe bits ......................................................................................................................33
12.2.2. Non-safe bits ................................................................................................................33
12.3. Data blocks for extension module MCM..........................................................................................34
12.3.1. Safe bits ......................................................................................................................34
12.3.2. Non-safe bits ................................................................................................................34
12.4. Data blocks for submodules ..........................................................................................................35
12.5. Replacing a bus module MBM without programming device..............................................................35
12.6. Teach-in operation (only for systems with locking module MGB2 unicode) .........................................35
13. Diagnostics, troubleshooting and aids.................................................................. 36
13.1. Reset and restart..........................................................................................................................36
13.2. Acknowledging faults ....................................................................................................................36
13.3. Resetting system to factory settings ..............................................................................................36
13.4. Diagnostics with the aid of the device web interface........................................................................37
13.4.1. Using device web interface............................................................................................37
13.5. General faults...............................................................................................................................39
13.6. Teach-in errors and conguration errors..........................................................................................39
13.7. Transponder faults........................................................................................................................39
13.8. Environment errors .......................................................................................................................40
13.9. MLI communication errors.............................................................................................................40
13.10. Plausibility errors ..........................................................................................................................41
13.11. Submodule faults..........................................................................................................................41
14. Pronet errors.................................................................................................... 42
15. PROFIsafe errors ................................................................................................ 43
