Euhomy BR-110 User manual

Email: [e-mail] Facebook: @Euhomy.Official
BEVERAGE
REFRIGERATOR
SKU: BR-110/BR-110H
Instruction Manual

Congratulations
Be sure to register at
www.euhomy.com/register
for updates, warranty, and other relevant information.
Dear Customer:
Welcome to the Euhomy family. Thank you for purchasing one of our products.
Our goal is to provide you with superior service. If there is anything missing from or wrong with
your order, or if you have any questions about using our product, PLEASE contact us.
Email: [email protected]
Facebook: @Euhomy.Official
The Euhomy team is available 24/7 to address your questions, comments, and concerns. Your
satisfaction is our ultimate goal. We want to make everything right so you'll share your positive
experience with other shoppers on Amazon.
If you experience any problems, please send an email to [email protected].
Our mission:
* To be the most trusted appliance brand.
* To create practical, compact appliances that better your life.

TABLE OF CONTENTS
Safety precautions
Installation
Instructions
Placement
Defrosting and Normal Sounds
Maintenance
Warranty
Trouble shooting
2-3
4-5
6
7
8
9
10
11
01

SAVE THESE INSTRUCTIONS / For Household Use Only
WARNINGS RELATED TO ELECTRICITY
WARNINGS RELATED TO USE
WARNINGS RELATED TO PLACING ITEMS
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not store explosive substances, such as aerosol cans with a flammable propellant, in this
appliance.
Do not use extension cords or ungrounded (two prong) adapters.
This appliance is intended to be used in households and similar applications such as: staff kitchen
areas in shops, offices and other working environments; hotels, motels and other residential type
environments; bed and breakfast type environments; catering and similar non-retail applications.
Do not pull on the power cord when pulling the power plug of the beverage cooler. Firmly grasp the
plug and pull it out from the socket directly.
Do not damage the power cord under any circumstances.
Please use a dedicated three-hole power socket which is 15A or more and not shared with other
electrical appliances.
Please ensure that the grounding electrode of the power socket is equipped with a reliable
grounding line.
The beverage cooler uses AC power supply of 115V/60 Hz. If the voltage fluctuation exceeds the
range of 115V +- 10%, it can cause accidents or damage the cooler.
In case of leaking gas, turn off the leaking valve and open all doors and windows. Do not unplug the
cooler yourself, as it may cause a fire. Contact customer support immediately.
For your safety, don’t place electric any devices on top of the cooler like microwaves or electric
kettles, and don’t store your beverage cooler inside your pantry.
Make sure there is ample ventilation space surrounding the beverage cooler.
Be careful not to get your fingers or any dangling accessories caught in the cooler door.
This cooler and its packaging are not intended to be played with or used by children. If a child is using
the cooler, it must be with adult supervision to avoid injury.
Keep the cooler away from moist, damp or humid environments and situations so as not to damage the
electrical insulation.
Do not use the base, cooler door, etc. as pedal or support.
Do not place heavy objects on top of the cooler to prevent accidental damage or injury.
Do not put flammable, explosive, volatile and highly corrosive items in the cooler to prevent damages to
the product or fire accidents.
Do not place flammable items near the cooler to avoid fires.
This product is for household refrigeration appliances, mainly used in the storage of beverage, not for
any other purposes, such as storage of blood, drugs or biological products.
Do not cover or close ventilation and exhaust holes.
Safety Precautions
02

Pre-Operation
TOOLS REQUIRED
#2 Phillips
screwdriver Socket tool
Flat head5/16-inch(8mm)
screwdriver
PRODUCT DESCRIPTION
Part Description Part Description
A3.2 cu ft beverage cooler D
BShelf E
Adjustable front leveling legs
CReversible double-pane glass door
with stainless-steel frame
Fan
B
C
D
E
A
03

Remove the exterior and interior packaging.
Before connecting the appliance to the power source, let it stand upright for approximately 24
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Clean the interior surface using lukewarm water and a soft cloth.
The appliance is designed for freestanding installation.
WARNING: Do not store or install the appliance outdoors.
CAUTION: This appliance is designed for storing and cooling beverage or wines. Do not store
perishable food, medicine or other medical products.
Place your appliance on a hard and level floor that is strong enough to support it when it is
fully loaded.
To level your appliance, adjust the levelling legs at the bottom of the appliance, if necessary.
Allow at least 5 inches (127mm) of space between the back and sides of the appliance are
suggested, which allows the proper air circulation to cool the compressor and condenser. We
do not recommend installing the appliance on a carpet.
Do not install the appliance near an oven or other heating source. Direct sunlight may affect
the acrylic coating and heat sources may increase electrical consumption. For best
performance, do not install the appliance behind a cabinet door or block the base grille.
Extreme cold ambient temperatures may also prevent the appliance from performing properly.
Avoid locating the appliance in area that may be exposed to excessive moisture.
Plug in the appliance into an exclusive, grounded wall power outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a qualified electrician or an
authorized service center.
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury when using
your appliance, follow these basic precautions:
Read all instructions before using the appliance.
DANGER or WARNING: An empty beverage refrigerator can be a hazardous for children or small pets. If
disposing of the beverage refrigerator, remove all gasket seals, latches, lids or the entire door from your
unused appliance, or take other actions to ensure that the beverage refrigerator is harmless.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire or
explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire or explosion.
BEFORE USING YOUR APPLIANCE
INSTALLATION OF YOUR APPLIANCE
Installation
04

A freestanding installation will allow you to install the beverage refrigerator in any place you desire
provided that the required clearance space around the appliance is respected. In every setting, there
must be adequate ventilation and access for service. Never install or operate the unit in an enclosed
area, such as a closed cabinet. Allowance of at least 5 inches (127mm) of space between the back
and sides of the appliance are suggested, which allows the proper air circulation to cool the
compressor and condenser.
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with
three-prong. Have the wall outlet and circuit checked by a qualified electrician to ensure that the
outlet is properly grounded. The cord should be secured behind the appliance and not left exposed
or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage
rating that matches the rating label on the appliance. This provides the best performance and also
prevents overloading house wiring circuits that could be a fire hazard from overheated. Never
unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out
from the receptacle. Immediately repair or replace all power cords that have become frayed or
otherwise damaged.
Do not use a cord that shows cracks or abrasion damage along its length or at either end. When
moving the appliance, be careful not to damage the power cord.
Because of potential safety hazards, it is strongly recommended that you do not use an extension
cord with this appliance. However, if you must use an extension cord, it is absolutely necessary that
it be a UL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and
outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Improper use of the grounded plug may result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualified electrician or contact EUHOMY Service Department.
FREESTANDING INSTALLATION
ELECTRICAL CONNECTION
EXTENSION CORD
Installation
Your beverage refrigerator should be conveniently located for day-to-day use in a dry,
well-ventilated room.
Do not install the appliance where the temperature will go below 60°F or above 90°F, because it will
not maintain proper temperatures. Be sure to install your beverage refrigerator on a floor strong
enough to support it when it is fully loaded.
INSTALLATION LOCATION
05

Connect the power cord to a standard wall outlet. Do not use a GFCI outlet to connect the unit
(see page 4). After connection, you will immediately hear a short beep.
PROPER USE OF BEVERAGE COOLER
Startup
Display Controls
The default temperature is 43°F. Use the and buttons to set the desired temperature
between the range of 32°F-61°F.
The display will flash while the temperature is being set. After a few seconds，it will revert to its
current internal temperature reading. The digital display reading will adjust as the unit cools.
While the unit is adjusting to the new setting, press the or buttons to view the selected
temperature setting.
If there is a power outage, the unit will revert to the last temperature setting once power is
restored.
Loading Beverages
When first loading the beverage cooler to full capacity, we recommend the following steps to
effectively cool a large number of beverages.
1. Use the Adjustable Thermostat Control to set the temperature to 43°F (also the default
temperature).
2. Allow the beverage cooler to cool for a minimum of two hours.
3. Load the beverages. To achieve maximum capacity, refer to the loading diagrams.
4. After initially filing with beverages, the internal temperature will rise as indicated on the display.
5. Once the beverage cooler has cooled the beverages to 43°F, use the Adjustable
Thermostat Control to select a desired cooler internal temperature (lowest temperature setting is
40°F).
6. Allow several hours for the beverage cooler to cool to the desired lower temperature.
Note：It is normal for temperature variances to occur inside the unit, and areas near the door will
have slightly warmer temperatures.
LED LIGHT
Press the button to turn the LED light on and off.
To enhance the lifespan of the LED light and conserve energy, it is recommended to
predominantly utilize the light for loading and selecting beverages.
Instructions
06

Tools needed: flathead screwdriver, Phillips screwdriver
CAUTION: Before you begin, unplug the beverage refrigerator from power.
1. Using a flathead screw driver, carefully pry the top hinge cover off.
2. Using a Phillips screwdriver, remove the screws and take off the
top hinge. Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and set the door aside.
4. Remove the bottom hinge by removing the screws with a Phillips
head screwdriver.
1. Using a flathead screwdriver, remove the plugs and cover from the opposite cabinet top corner
and from the door.
2. Install the bottom hinge at the opposite side corner and fasten the screws.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and install the top hinge.
5. Push the plugs and covers into the corresponding holes.
1
- It is important for the beverage cooler to be levelled in
order to work properly.
- It can be raised or lowered by rotating each of the feet on
the bottom of the machine.
- If you find that the surface is not level, rotate the feet
until the beverage refrigerator becomes level. You may
need to make several adjustments to level it. We recom-
mend using a carpenter’s level to check the machine.
1. Place a carpenter’s level on top of the product to see if the beverage refrigerator is level from
front to back and side to side.
2. Adjust the height of the feet as follows: Turn the levelling feet to the right to lower that side of
the refrigerator. Turn the levelling feet to the left to raise that side of the refrigerator.
IMPORTANT: Once you are ready to install, you must adjust the feet to level the beverage
refrigerator.
REVERSING THE DOOR SWING
To remove the door:
To install the door:
LEVELING THE APPLIANCE
Placement
07
Hinge Cover
Top hinge
Screws
Cabinet
Door

DEFROSTING
The unit is cooled by a compressor. The compressor pumps coolant through the cooling system,
producing operating noise. Even when the compressor cuts out, noises caused by changes in
temperature and pressure are unavoidable. Operating noise will be most audible immediately after
the compressor comes on. It becomes quieter as the operating period continues.
NOTE: An individual’s perception of noise is directly linked to the environment in which the unit is
located, as well the specific type of models. Our appliances are in line with international standards
for such appliance and in line with the latest technical developments. Please remember that the
noise of the compressor and the coolant circulating in the system is unavoidable.
- Gurgling sound, caused by the refrigerant flowing through the appliance’s coils.
- Humming noise, made by the compressor. This noise can get louder for brief periods when the
motor is switching on.
- Cracking/popping sounds, resulting from the materials contraction and expansion due to
temperature variations, fan operating sound, to circulate the air within the refrigerator cabinet.
NORMAL SOUNDS
The following noises are normal and occur from time to time:
Frost may form on the interior back panel of the unit when the temperature setting is very low and
the unit is not fully stocked with beverages. The presence of frost may force the unit to run
continuously and thus, increase internal temperature.
To defrost the beverage cooler:
1. Use the and buttons to increase the temperature until the compressor turns off.
2. Allow the internal ice/frost build-up to melt. Ensure the internal drain (located at the middle
back of the lower shelf) is not clogged.
3. During this time, the melted frost flows through an internal drain into a holding pan on top of
the compressor. The heat of the compressor evaporates the liquid.
4. Reset the temperature to 43°F and allow it to cool for at least one hour.
5. Adjust to the desired temperature setting.
Defrosting and Normal Sounds
08

DISCONNECTING THE BEVERAGE COOLER
CLEANING YOUR BEVERAGE COOLER
FREQUENTLY ASKED QUESTIONS
Unplug the power plug from the socket to disconnect the cooler.
Note: Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid or
alkaline items as this may damage the surface and interior of the cooler.
Dusting behind the cooler and on the ground will improve the cooling effect and save energy. The
interior of the cooler should be cleaned to avoid any odors. Follow the cleaning procedure below.
1. Unplug the cooler.
2. Wipe the door seal clean with warm water.
3. Use soap and warm water to clean the cooler.
4. Reconnect the cooler when the cooler is clean and dry.
I’m hearing some sounds, what’s up with that?
Buzzing or any gurgling sound is normal as that can be a result of the unit working properly or
refrigerating fluid flowing through the pipeline.
Maintenance
09

Warranty
Euhomy offers a limited 1-year warranty (“warranty period”) on all of our products purchased new
and unused from Euhomy company, with an original proof of purchase and where a defect has
arisen, wholly or substantially, as a result of faulty manufacture, parts or workmanship during the
warranty period. The warranty does not apply where damage is caused by other factors, including,
but not limited to:
(a) normal wear and tear;
(b) abuse, mishandling, accident, or failure to follow operating instructions;
(c) exposure to liquid or infiltration of foreign particles;
(d) servicing or modifications of the product other than by Euhomy;
(e) commercial or non-household use.
The Euhomy warranty covers all costs related to restoring the proven defective product through
repair or replacement of any defective part and necessary labor so that it conforms to its original
specifications. A replacement product may be provided instead of repairing a defective product.
Euhomy’s exclusive obligation under this warranty is limited to such repair or replacement. A receipt
indicating the purchase date is required for any claim, so please keep all receipts in a safe place.
Although greatly appreciated, the product registration is not required to activate any warranty and
product registration does not eliminate the need for the original proof of purchase. The warranty
becomes void if attempts at repair are made by non-authorized third parties and/or if spare parts,
other than those provided by Euhomy, are used.
You may also arrange for service after the warranty expires at an additional cost. These are our
general terms for warranty service, but we always urge our customers to reach out to us with any
issue, regardless of warranty terms. If you have an issue with a Euhomy product, please contact us
([email protected]), and we will do our best to resolve it for you.
10

Problem Possible Causes Solutions
The appliance does
not operate
The appliance is not
cold enough
The appliance
frequently turns
on and off
The appliance makes
too much noise
The door does not
close proper- ly
Condensation builds
up on the glass door.
The appliance is not level
The door was reversed and not
properly installed
The shelves are out of position
Ambient temperature or humidity is
high.
Lower the room humidity by a dehu-
midifier or air conditioner.
Make sure the appliance is on a hard
and level surface. Avoid placing the
appliance on a carpeted or soft surface
Reinstall door
Correctly install the shelves
There is a power failure
The appliance is not plugged in
A house fuse has blown or the
1circuit breaker is tripped
The appliance is placed too close to
a heat source
The door is opened too often
The door is not closed completely
The door gasket does not seal
properly
The ambient (room) temperature is
too low or high
A large amount of contents has been
added to the appliance
The door is opened too often
The door is not closed completely
The door gasket does not seal
properly
The noise may come from the flow
of the refrigerant and expansion
of the inside walls may cause
popping and crackling noises
Contraction and expansion of the
inside walls may cause popping and
crackling noises
The appliance is not level
It is normal that as each cooling cycle
ends, you may hear rattling or gurgling
sounds caused by the flow of refriger- ant
in the appliance. The high efficien- cy
compressor may make a pulsating or high
pitched sound
Some popping or cracking noises are
normal. They are caused by expansion and
contraction of the inside walls due to
temperature changes
Make sure the unit is placed on a hard and
level surface. Do not place the appliance
on carpet
See Normal Sounds
Decrease or increase the ambient
(room) temperature
To minimize internal temperature
fluctuation, do not overstock the
appliance
Close the door tightly and do not
open the door too frequently or for
a long period of time
Ensure the door gasket is not loose
It is normal for the fan to come on
and turn off to circulate the air
inside of the unit for even
temperature distribution and to
save energy
Adjust the temperature
Keep the appliance away from sun-
shine or other heat sources
Close the door tightly and do not
open the door too frequently or for a
long period of time
Ensure the door gasket is not loose.
Ensure the appliance is plugged in
and the power outlet has power
Replace the broken fuse or reset the
breaker
Trouble shooting
11

Email: [e-mail] Facebook: @Euhomy.Official