Eurocave 059 User manual

Wine cabinet installation
Flush-fitting diagrams - Compact 59
www.eurocave.com
Compact Range
Dimensions to be observed
See chapter “Adjusting the feet and securing the cabinet”
259: It is essential that the unit
inside which the cabinet will be
tted has an opening at the top, at the
back, measuring at least 540mm in length
and 50mm in width (see technical door
diagram).
50 mini
1802 mini
594
600
B mini
1797 mini
A
C
B
540 mini
059 259
600
560
mini
594
837-853
548
503
113
862
750
495
47
A
837-853
A
C
B
B
A max. A min. A max. A min. B C min.
with raising piece*with raising piece*
059 853 837 896 880 548 842
259 1813 1797 1856 1840 595 1802
.for a technical door
600
560
mini
594
837-853
548
503
113
862
750
495
47
A
837-853
A
C
B
B
25
47
69,5
Weight of
door face:
15 Kg max.
Weight of
door face:
15 Kg max.

www.eurocave.com
Compact Range
The wine cabinet’s 4 feet can be adjusted in height.
- If necessary, use the hexagonal raising pieces (8) supplied in the “accessories” sachet. Tilt the appliance forwards, ensuring that the door remains shut.
Unscrew the back feet and t the raising pieces, using a 17 mm open-ended spanner. Screw the 2 back feet onto the raising pieces.
Repeat the procedure for the 2 front feet, this time tilting the appliance backwards.
- Use suitable screws to secure the wine cabinet underneath the work top or inside the unit via the holes provided in the hinges.
(to be carried out only when the cabinet is empty)
8
- Position the cabinet so that it is level underneath the work top or inside the unit
- Open the cabinet door to 90°
- Fasten the door face of the kitchen unit onto the cabinet door (8 screws supplied)
- Ensure that the seal is completely air tight
Size 059 259
Door height (in mm) 696 1656
Door width (in mm) 592 592
Door thickness (in mm) 29 29
Seal thickness (in mm) 10 10
Total thickness (in mm) 39 39
Max. weight of door face (in kg) 15 15
Door face + door total weight (in kg) 16 39,5
- Gently remove the caps using a thin blade.
- Unscrew the three screws (1) using a T25 Torx wrench.
- Remove the hinge (2).
- On the other side, gently remove the caps using a thin blade
(3).
- Assemble (4) the hinge with pin (B) using the screws (5) in
such a way that the door is completely parallel to the body.
- Assemble (6) the hinge without pin (A) using the screws (7).
When you close the door, ensure that the seal adheres well to
the body to guarantee air tightness
Changing the hinges
Adjusting the feet and securing the cabinet
Fastening a unit door to a technical door
1
2
3
7
6
4
5
A
B
Wine cabinet installation
Flush-fitting diagrams - Compact 59
Never obstruct the front air vent.
This could result in poor functioning
of the cabinet.
On the side of the axis of rotation
of the door, position it at least 3 mm
from the adjacent unit.
The plug must be accessible after the appliance has been
installed. For medium and large models, it is essential
that the cabinet is fastened to the unit. Check that the
appliance is securely fastened to the unit and that the
unit is securely fastened to the wall.
If your door is glazed, never place it on its side as it may
break.
N.B.!
.the air vent
.rotation of the door
.access to the plug
.glass door
Do not
obstruct

Covering the ventilation grid of your wine cabinet (To optimise the design) can result in poor ventilation of the cabinet.
It is therefore necessary to observe the following installation conditions:
Covering the ventilation grid of your wine cabinet
.For a non-elevated wine cabinet
Baseboard
.For an elevated wine cabinet (with the
hexagonal pillars)
The air ows must not be mixed.
Make sure that the incoming
ai ow comes from outside by
isolating the air ows. (By using
adhesive foam for example)
W= Width of an opening
H= Height of an opening
The baseboard must have the same openings as
those of the ventilation grid.
Left end section Middle section Right end section
8x(W: 6mmxH:60mm) 27x(W:
6mmxH:60mm) 8x(W: 6mmxH:60mm)
1 2
When the cabinet is installed with the hexagonal pillars to be
elevated, you must adapt the shape of the separators. This is
important in order to correctly guide the air ows downwards and
therefore to the ventilation grid (incoming or outgoing).
www.eurocave.com
Compact Range
Wine cabinet installation
Flush-fitting diagrams - Compact 59